On Tue, 2020-01-21 at 15:58 -0800, Vivek Kasireddy wrote:
> Perhaps in some cases the BIOS/GOP or other firmware may turn on
> PHY A but may not program the MUX correctly. Therefore, re-program
> PHY A if it is determined after reading the VBT that the value
> programmed for the MUX bit does not match the expected value.
This was causing the MST issue that you mentioned?
Anyway looks more safe do this to protect i915 from issues in firmware.
Reviewed-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
>
> Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
> ---
> .../gpu/drm/i915/display/intel_combo_phy.c | 74 +++++++++++----
> ----
> 1 file changed, 45 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> index 5f54aca7c36f..ec63c2657923 100644
> --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> @@ -191,20 +191,57 @@ static bool icl_combo_phy_enabled(struct
> drm_i915_private *dev_priv,
> (I915_READ(ICL_PORT_COMP_DW0(phy)) &
> COMP_INIT);
> }
>
> +static bool ehl_vbt_ddi_d_present(struct drm_i915_private *i915)
> +{
> + bool ddi_a_present = intel_bios_is_port_present(i915, PORT_A);
> + bool ddi_d_present = intel_bios_is_port_present(i915, PORT_D);
> + bool dsi_present = intel_bios_is_dsi_present(i915, NULL);
> +
> + /*
> + * VBT's 'dvo port' field for child devices references the DDI,
> not
> + * the PHY. So if combo PHY A is wired up to drive an external
> + * display, we should see a child device present on PORT_D and
> + * nothing on PORT_A and no DSI.
> + */
> + if (ddi_d_present && !ddi_a_present && !dsi_present)
> + return true;
> +
> + /*
> + * If we encounter a VBT that claims to have an external
> display on
> + * DDI-D _and_ an internal display on DDI-A/DSI leave an error
> message
> + * in the log and let the internal display win.
> + */
> + if (ddi_d_present)
> + DRM_ERROR("VBT claims to have both internal and
> external displays on PHY A. Configuring for internal.\n");
> +
> + return false;
> +}
> +
> static bool icl_combo_phy_verify_state(struct drm_i915_private
> *dev_priv,
> enum phy phy)
> {
> bool ret;
> + u32 expected_val = 0;
>
> if (!icl_combo_phy_enabled(dev_priv, phy))
> return false;
>
> ret = cnl_verify_procmon_ref_values(dev_priv, phy);
>
> - if (phy == PHY_A)
> + if (phy == PHY_A) {
> ret &= check_phy_reg(dev_priv, phy,
> ICL_PORT_COMP_DW8(phy),
> IREFGEN, IREFGEN);
>
> + if (IS_ELKHARTLAKE(dev_priv)) {
> + if (ehl_vbt_ddi_d_present(dev_priv))
> + expected_val = ICL_PHY_MISC_MUX_DDID;
> +
> + ret &= check_phy_reg(dev_priv, phy,
> ICL_PHY_MISC(phy),
> + ICL_PHY_MISC_MUX_DDID,
> + expected_val);
> + }
> + }
> +
> ret &= check_phy_reg(dev_priv, phy, ICL_PORT_CL_DW5(phy),
> CL_POWER_DOWN_ENABLE,
> CL_POWER_DOWN_ENABLE);
>
> @@ -263,32 +300,6 @@ void intel_combo_phy_power_up_lanes(struct
> drm_i915_private *dev_priv,
> I915_WRITE(ICL_PORT_CL_DW10(phy), val);
> }
>
> -static u32 ehl_combo_phy_a_mux(struct drm_i915_private *i915, u32
> val)
> -{
> - bool ddi_a_present = intel_bios_is_port_present(i915, PORT_A);
> - bool ddi_d_present = intel_bios_is_port_present(i915, PORT_D);
> - bool dsi_present = intel_bios_is_dsi_present(i915, NULL);
> -
> - /*
> - * VBT's 'dvo port' field for child devices references the DDI,
> not
> - * the PHY. So if combo PHY A is wired up to drive an external
> - * display, we should see a child device present on PORT_D and
> - * nothing on PORT_A and no DSI.
> - */
> - if (ddi_d_present && !ddi_a_present && !dsi_present)
> - return val | ICL_PHY_MISC_MUX_DDID;
> -
> - /*
> - * If we encounter a VBT that claims to have an external
> display on
> - * DDI-D _and_ an internal display on DDI-A/DSI leave an error
> message
> - * in the log and let the internal display win.
> - */
> - if (ddi_d_present)
> - DRM_ERROR("VBT claims to have both internal and
> external displays on PHY A. Configuring for internal.\n");
> -
> - return val & ~ICL_PHY_MISC_MUX_DDID;
> -}
> -
> static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
> {
> enum phy phy;
> @@ -319,8 +330,13 @@ static void icl_combo_phys_init(struct
> drm_i915_private *dev_priv)
> * "internal" child devices.
> */
> val = I915_READ(ICL_PHY_MISC(phy));
> - if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_A)
> - val = ehl_combo_phy_a_mux(dev_priv, val);
> + if (IS_ELKHARTLAKE(dev_priv) && phy == PHY_A) {
> + val &= ~ICL_PHY_MISC_MUX_DDID;
> +
> + if (ehl_vbt_ddi_d_present(dev_priv))
> + val |= ICL_PHY_MISC_MUX_DDID;
> + }
> +
> val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> I915_WRITE(ICL_PHY_MISC(phy), val);
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
