[PATCH 6/7] drm/i915/bios: fill in DSC rc_model_size from VBT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The VBT fields match the DPCD data, so use the same helper.

Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_bios.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 70fb87e7afb6..26bcea77efc5 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -2427,16 +2427,11 @@ static void fill_dsc(struct intel_crtc_state *crtc_state,
 			      crtc_state->dsc.slice_count);
 
 	/*
-	 * FIXME: Use VBT rc_buffer_block_size and rc_buffer_size for the
-	 * implementation specific physical rate buffer size. Currently we use
-	 * the required rate buffer model size calculated in
-	 * drm_dsc_compute_rc_parameters() according to VESA DSC Annex E.
-	 *
 	 * The VBT rc_buffer_block_size and rc_buffer_size definitions
-	 * correspond to DP 1.4 DPCD offsets 0x62 and 0x63. The DP DSC
-	 * implementation should also use the DPCD (or perhaps VBT for eDP)
-	 * provided value for the buffer size.
+	 * correspond to DP 1.4 DPCD offsets 0x62 and 0x63.
 	 */
+	vdsc_cfg->rc_model_size = drm_dsc_dp_rc_buffer_size(dsc->rc_buffer_block_size,
+							    dsc->rc_buffer_size);
 
 	/* FIXME: DSI spec says bpc + 1 for this one */
 	vdsc_cfg->line_buf_depth = VBT_DSC_LINE_BUFFER_DEPTH(dsc->line_buffer_depth);
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux