Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.
Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
---
.../drm/i915/display/intel_display_power.c | 19 +++----------------
drivers/gpu/drm/i915/i915_reg.h | 12 +++++++++---
drivers/gpu/drm/i915/intel_pm.c | 19 ++-----------------
3 files changed, 14 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 4503f5fab63d..806392fd97ea 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -4415,22 +4415,9 @@ void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
DRM_DEBUG_KMS("Updating dbuf slices to 0x%x\n", req_slices);
for (i = 0; i < max_slices; i++) {
- u8 slice_set = req_slices & BIT(i);
-
- switch (i) {
- case DBUF_S1:
- intel_dbuf_slice_set(dev_priv,
- DBUF_CTL_S1,
- slice_set);
- break;
- case DBUF_S2:
- intel_dbuf_slice_set(dev_priv,
- DBUF_CTL_S2,
- slice_set);
- break;
- default:
- MISSING_CASE(i);
- }
+ intel_dbuf_slice_set(dev_priv,
+ DBUF_CTL_S(i),
+ (req_slices & BIT(i)) != 0);
}
dev_priv->enabled_dbuf_slices_mask = req_slices;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6cc55c103f67..34f1cf3597fd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7745,9 +7745,15 @@ enum {
#define DISP_ARB_CTL2 _MMIO(0x45004)
#define DISP_DATA_PARTITION_5_6 (1 << 6)
#define DISP_IPC_ENABLE (1 << 3)
-#define DBUF_CTL _MMIO(0x45008)
-#define DBUF_CTL_S1 _MMIO(0x45008)
-#define DBUF_CTL_S2 _MMIO(0x44FE8)
+#define DBUF_CTL_ADDR1 0x45008
+#define DBUF_CTL_ADDR2 0x44FE8
+#define DBUF_CTL _MMIO(DBUF_CTL_ADDR1)
+#define DBUF_CTL_S1 DBUF_CTL
+#define DBUF_CTL_S2 _MMIO(DBUF_CTL_ADDR2)
+/* DBUF_CTL_ADDR2 is less than DBUF_CTL_ADDR1 */
+#define DBUF_CTL_DIST (DBUF_CTL_ADDR1 - DBUF_CTL_ADDR2)
+#define DBUF_CTL_ADDR(X) (DBUF_CTL_ADDR1 - (DBUF_CTL_DIST * (X)))
+#define DBUF_CTL_S(X) (_MMIO(DBUF_CTL_ADDR(X)))
#define DBUF_POWER_REQUEST (1 << 31)
#define DBUF_POWER_STATE (1 << 30)
#define GEN7_MSG_CTL _MMIO(0x45010)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6ba72a6be7cb..e5b82264ca5f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3655,23 +3655,8 @@ u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *dev_priv)
return BIT(DBUF_S1);
for (i = 0; i < max_slices; i++) {
- u8 slice_bit = BIT(i);
- bool res;
-
- switch (i) {
-
- case DBUF_S1:
- res = I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE;
- break;
- case DBUF_S2:
- res = I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE;
- break;
- default:
- MISSING_CASE(slice_bit);
- }
-
- if (res)
- enabled_slices_mask |= slice_bit;
+ if (I915_READ(DBUF_CTL_S(i)) & DBUF_POWER_STATE)
+ enabled_slices_mask |= BIT(i);
}
return enabled_slices_mask;
--
2.24.1.485.gad05a3d8e5
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
