From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> When moving the pipe disable & co. function calls from haswell_crtc_disable() into the encoder .post_disable() hooks I neglected to account for the MST vs. DDI interactions properly. This now leads us to call these functions two times for the last MST stream (once from the MST code and a second time from the DDI code). The calls from the DDI code should only be done for SST and not MST. Add the proper check for that. This results in an MCE on ICL. My vague theory is that we turn off the transcoder clock from the MST code and then we proceed to touch something in the DDI code which still depends on that clock causing the hardware to become upset. Though I can't really explain why Stan's hack of omitting the pipe disable in the MST code would avoid the MCE since we should still be turning off the transcoder clock. But maybe there's something magic in the hw that keeps the clock on as long as the pipe is on. Or maybe the clock isn't the problem and we now touch something in the DDI disable code that really does need the pipe to be still enabled. v2: Rebase to latest drm-tip Cc: José Roberto de Souza <jose.souza@xxxxxxxxx> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx> Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx> Closes: https://gitlab.freedesktop.org/drm/intel/issues/901 Fixes: 773b4b54351c ("drm/i915: Move stuff from haswell_crtc_disable() into encoder .post_disable()") Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_ddi.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 07acd0daca25..6e0a75d1e6ca 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3897,21 +3897,23 @@ static void intel_ddi_post_disable(struct intel_encoder *encoder, enum phy phy = intel_port_to_phy(dev_priv, encoder->port); bool is_tc_port = intel_phy_is_tc(dev_priv, phy); - intel_crtc_vblank_off(old_crtc_state); + if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) { + intel_crtc_vblank_off(old_crtc_state); - intel_disable_pipe(old_crtc_state); + intel_disable_pipe(old_crtc_state); - if (INTEL_GEN(dev_priv) >= 11) - icl_disable_transcoder_port_sync(old_crtc_state); + if (INTEL_GEN(dev_priv) >= 11) + icl_disable_transcoder_port_sync(old_crtc_state); - intel_ddi_disable_transcoder_func(old_crtc_state); + intel_ddi_disable_transcoder_func(old_crtc_state); - intel_dsc_disable(old_crtc_state); + intel_dsc_disable(old_crtc_state); - if (INTEL_GEN(dev_priv) >= 9) - skl_scaler_disable(old_crtc_state); - else - ilk_pfit_disable(old_crtc_state); + if (INTEL_GEN(dev_priv) >= 9) + skl_scaler_disable(old_crtc_state); + else + ilk_pfit_disable(old_crtc_state); + } /* * When called from DP MST code: -- 2.24.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
