On Sun, Dec 15, 2019 at 5:38 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote: > Move the Crystal Cove PMIC panel GPIO lookup-table from > drivers/mfd/intel_soc_pmic_core.c to the i915 driver. > > The moved looked-up table is adding a GPIO lookup to the i915 PCI > device and the GPIO subsys allows only one lookup table per device, > > The intel_soc_pmic_core.c code only adds lookup-table entries for the > PMIC panel GPIO (as it deals only with the PMIC), but we also need to be > able to access some GPIOs on the SoC itself, which requires entries for > these GPIOs in the lookup-table. > > Since the lookup-table is attached to the i915 PCI device it really > should be part of the i915 driver, this will also allow us to extend > it with GPIOs from other sources when necessary. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Looks OK to me Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> But Lee & Andy should have a final word on this. Yours, Linus Walleij _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
