Re: [PATCH 1/2] drm/i915/dsc: fix DSC register selection for ICL DSI transcoders

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 11 Dec 2019, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote:
> On Wed, Dec 11, 2019 at 06:23:46PM +0200, Jani Nikula wrote:
>> ICL eDP and DSI transcoders have a DSC engine separate from the
>> pipe. Abstract the register selection and fix it for ICL.
>> 
>> Add a warning for pipe A DSC on ICL; it does not exist.
>> 
>> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
>> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/display/intel_vdsc.c | 58 +++++++++++++++--------
>>  1 file changed, 38 insertions(+), 20 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
>> index ed9048140937..e6f60be9ee84 100644
>> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
>> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
>> @@ -353,6 +353,26 @@ bool intel_dsc_source_support(struct intel_encoder *encoder,
>>  	return false;
>>  }
>>  
>> +static bool is_pipe_dsc(const struct intel_crtc_state *crtc_state)
>> +{
>> +	const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
>> +	const struct drm_i915_private *i915 = to_i915(crtc->base.dev);
>> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>> +
>> +	if (INTEL_GEN(i915) >= 12)
>> +		return true;
>> +
>> +	if (cpu_transcoder == TRANSCODER_EDP ||
>> +	    cpu_transcoder == TRANSCODER_DSI_0 ||
>> +	    cpu_transcoder == TRANSCODER_DSI_1)
>> +		return false;
>> +
>> +	/* There's no pipe A DSC engine on ICL */
>> +	WARN_ON(crtc->pipe == PIPE_A);
>> +
>> +	return true;
>> +}
>> +
>
> So for >=Gen12, it will always go to the else part in PPS configure and use
> ICL_DSC0_PICTURE_PARAMETER_SET_1 register per pipe.

FWIW, this was already the case for gen 12+, because there's no eDP
transcoder.

> Right now this only calculates register addresses for PIPE_B and PIPE_C for ICL but
> no register defs for DSC_PPS for GEN >=12
>
> As far as the selection logic this patch looks good and will work for <12 GEN , but it will
> currently fail for DSC on >=12
>
> Lucas, Jose - Is thsi something anyone's looking at adding?

Oh, I failed to mention how subtle this is. It does work fine on all
pipes on gen 12+. It's just that with pipe A, the index becomes (PIPE_A
- PIPE_B) = -1, and it extrapolates the correct register offset, the
other direction than usually.

You see, gen 12 only has pipe DSC, with a DSC engine added to pipe A
too, and no eDP/DSI specific DSC like ICL.

Sure, the register definitions need an update, it's ugly and misleading,
but it's not really broken for gen 12 pipe A. :)

BR,
Jani.


>
> Regards
> Manasi
>
>>  int intel_dsc_compute_params(struct intel_encoder *encoder,
>>  			     struct intel_crtc_state *pipe_config)
>>  {
>> @@ -471,7 +491,6 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>>  	const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
>>  	enum pipe pipe = crtc->pipe;
>> -	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>>  	u32 pps_val = 0;
>>  	u32 rc_buf_thresh_dword[4];
>>  	u32 rc_range_params_dword[8];
>> @@ -492,7 +511,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	if (vdsc_cfg->vbr_enable)
>>  		pps_val |= DSC_VBR_ENABLE;
>>  	DRM_INFO("PPS0 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_0, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -511,7 +530,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val = 0;
>>  	pps_val |= DSC_BPP(vdsc_cfg->bits_per_pixel);
>>  	DRM_INFO("PPS1 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_1, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -531,7 +550,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_PIC_HEIGHT(vdsc_cfg->pic_height) |
>>  		DSC_PIC_WIDTH(vdsc_cfg->pic_width / num_vdsc_instances);
>>  	DRM_INFO("PPS2 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_2, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -551,7 +570,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_SLICE_HEIGHT(vdsc_cfg->slice_height) |
>>  		DSC_SLICE_WIDTH(vdsc_cfg->slice_width);
>>  	DRM_INFO("PPS3 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_3, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -571,7 +590,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_INITIAL_XMIT_DELAY(vdsc_cfg->initial_xmit_delay) |
>>  		DSC_INITIAL_DEC_DELAY(vdsc_cfg->initial_dec_delay);
>>  	DRM_INFO("PPS4 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_4, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -591,7 +610,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_SCALE_INC_INT(vdsc_cfg->scale_increment_interval) |
>>  		DSC_SCALE_DEC_INT(vdsc_cfg->scale_decrement_interval);
>>  	DRM_INFO("PPS5 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_5, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -613,7 +632,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  		DSC_FLATNESS_MIN_QP(vdsc_cfg->flatness_min_qp) |
>>  		DSC_FLATNESS_MAX_QP(vdsc_cfg->flatness_max_qp);
>>  	DRM_INFO("PPS6 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_6, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -633,7 +652,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_SLICE_BPG_OFFSET(vdsc_cfg->slice_bpg_offset) |
>>  		DSC_NFL_BPG_OFFSET(vdsc_cfg->nfl_bpg_offset);
>>  	DRM_INFO("PPS7 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_7, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -653,7 +672,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_FINAL_OFFSET(vdsc_cfg->final_offset) |
>>  		DSC_INITIAL_OFFSET(vdsc_cfg->initial_offset);
>>  	DRM_INFO("PPS8 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_8, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -673,7 +692,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  	pps_val |= DSC_RC_MODEL_SIZE(DSC_RC_MODEL_SIZE_CONST) |
>>  		DSC_RC_EDGE_FACTOR(DSC_RC_EDGE_FACTOR_CONST);
>>  	DRM_INFO("PPS9 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_9, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -695,7 +714,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  		DSC_RC_TARGET_OFF_HIGH(DSC_RC_TGT_OFFSET_HI_CONST) |
>>  		DSC_RC_TARGET_OFF_LOW(DSC_RC_TGT_OFFSET_LO_CONST);
>>  	DRM_INFO("PPS10 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_10, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -718,7 +737,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  		DSC_SLICE_ROW_PER_FRAME(vdsc_cfg->pic_height /
>>  					vdsc_cfg->slice_height);
>>  	DRM_INFO("PPS16 = 0x%08x\n", pps_val);
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_PICTURE_PARAMETER_SET_16, pps_val);
>>  		/*
>>  		 * If 2 VDSC instances are needed, configure PPS for second
>> @@ -742,7 +761,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  		DRM_INFO(" RC_BUF_THRESH%d = 0x%08x\n", i,
>>  			 rc_buf_thresh_dword[i / 4]);
>>  	}
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_RC_BUF_THRESH_0, rc_buf_thresh_dword[0]);
>>  		I915_WRITE(DSCA_RC_BUF_THRESH_0_UDW, rc_buf_thresh_dword[1]);
>>  		I915_WRITE(DSCA_RC_BUF_THRESH_1, rc_buf_thresh_dword[2]);
>> @@ -791,7 +810,7 @@ static void intel_dsc_pps_configure(struct intel_encoder *encoder,
>>  		DRM_INFO(" RC_RANGE_PARAM_%d = 0x%08x\n", i,
>>  			 rc_range_params_dword[i / 2]);
>>  	}
>> -	if (cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0,
>>  			   rc_range_params_dword[0]);
>>  		I915_WRITE(DSCA_RC_RANGE_PARAMETERS_0_UDW,
>> @@ -870,7 +889,6 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
>>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>>  	struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
>>  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
>> -	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
>>  	enum pipe pipe = crtc->pipe;
>>  	enum intel_display_power_domain power_domain;
>>  	intel_wakeref_t wakeref;
>> @@ -885,7 +903,7 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
>>  	if (!wakeref)
>>  		return;
>>  
>> -	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		dss_ctl1 = I915_READ(DSS_CTL1);
>>  		dss_ctl2 = I915_READ(DSS_CTL2);
>>  	} else {
>> @@ -903,7 +921,7 @@ void intel_dsc_get_config(struct intel_encoder *encoder,
>>  	/* FIXME: add more state readout as needed */
>>  
>>  	/* PPS1 */
>> -	if (cpu_transcoder == TRANSCODER_EDP)
>> +	if (!is_pipe_dsc(crtc_state))
>>  		val = I915_READ(DSCA_PICTURE_PARAMETER_SET_1);
>>  	else
>>  		val = I915_READ(ICL_DSC0_PICTURE_PARAMETER_SET_1(pipe));
>> @@ -975,7 +993,7 @@ void intel_dsc_enable(struct intel_encoder *encoder,
>>  	else
>>  		intel_dsc_dp_pps_write(encoder, crtc_state);
>>  
>> -	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(crtc_state)) {
>>  		dss_ctl1_reg = DSS_CTL1;
>>  		dss_ctl2_reg = DSS_CTL2;
>>  	} else {
>> @@ -1002,7 +1020,7 @@ void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
>>  	if (!old_crtc_state->dsc.compression_enable)
>>  		return;
>>  
>> -	if (old_crtc_state->cpu_transcoder == TRANSCODER_EDP) {
>> +	if (!is_pipe_dsc(old_crtc_state)) {
>>  		dss_ctl1_reg = DSS_CTL1;
>>  		dss_ctl2_reg = DSS_CTL2;
>>  	} else {
>> -- 
>> 2.20.1
>> 

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux