Enable DSC for DSI, if specified in VBT.
This still lacks DSC aware get config implementation, and therefore
state checker will fail. Also mode valid is not there yet.
v5:
- add dsc get config call
v4:
- convert_rgb = true (Vandita)
- ignore max cdclock check (Vandita)
- rename pipe_config to crtc_state
v3:
- take compressed bpp into account
v2:
- Nuke conn_state->max_requested_bpc, it's not used on DSI
Bspec: 49263
Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/icl_dsi.c | 69 ++++++++++++++++++++++++--
1 file changed, 66 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index b1d775d834d4..03aa92d317a2 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -34,6 +34,7 @@
#include "intel_ddi.h"
#include "intel_dsi.h"
#include "intel_panel.h"
+#include "intel_vdsc.h"
static inline int header_credits_available(struct drm_i915_private *dev_priv,
enum transcoder dsi_trans)
@@ -1087,6 +1088,8 @@ static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
/* step5: program and powerup panel */
gen11_dsi_powerup_panel(encoder);
+ intel_dsc_enable(encoder, pipe_config);
+
/* step6c: configure transcoder timings */
gen11_dsi_set_transcoder_timings(encoder, pipe_config);
@@ -1248,6 +1251,13 @@ static void gen11_dsi_disable(struct intel_encoder *encoder,
gen11_dsi_disable_io_power(encoder);
}
+static enum drm_mode_status gen11_dsi_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /* FIXME: DSC? */
+ return intel_dsi_mode_valid(connector, mode);
+}
+
static void gen11_dsi_get_timings(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
@@ -1294,6 +1304,8 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ intel_dsc_get_config(encoder, pipe_config);
+
/* FIXME: adapt icl_ddi_clock_get() for DSI and use that? */
pipe_config->port_clock =
cnl_calc_wrpll_link(dev_priv, &pipe_config->dpll_hw_state);
@@ -1307,6 +1319,48 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
}
+static int gen11_dsi_dsc_compute_config(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
+ int dsc_max_bpc = INTEL_GEN(dev_priv) >= 12 ? 12 : 10;
+ bool use_dsc;
+ int ret;
+
+ use_dsc = intel_bios_get_dsc_params(encoder, crtc_state, dsc_max_bpc);
+ if (!use_dsc)
+ return 0;
+
+ if (crtc_state->pipe_bpp < 8 * 3)
+ return -EINVAL;
+
+ /* FIXME: split only when necessary */
+ if (crtc_state->dsc.slice_count > 1)
+ crtc_state->dsc.dsc_split = true;
+
+ vdsc_cfg->convert_rgb = true;
+
+ ret = intel_dsc_compute_params(encoder, crtc_state);
+ if (ret)
+ return ret;
+
+ /* DSI specific sanity checks on the common code */
+ WARN_ON(vdsc_cfg->vbr_enable);
+ WARN_ON(vdsc_cfg->simple_422);
+ WARN_ON(vdsc_cfg->pic_width % vdsc_cfg->slice_width);
+ WARN_ON(vdsc_cfg->slice_height < 8);
+ WARN_ON(vdsc_cfg->pic_height % vdsc_cfg->slice_height);
+
+ ret = drm_dsc_compute_rc_parameters(vdsc_cfg);
+ if (ret)
+ return ret;
+
+ crtc_state->dsc.compression_enable = true;
+
+ return 0;
+}
+
static int gen11_dsi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
@@ -1338,6 +1392,10 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = 18;
pipe_config->clock_set = true;
+
+ if (gen11_dsi_dsc_compute_config(encoder, pipe_config))
+ DRM_DEBUG_KMS("Attempting to use DSC failed\n");
+
pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
return 0;
@@ -1346,8 +1404,13 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
static void gen11_dsi_get_power_domains(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state)
{
- get_dsi_io_power_domains(to_i915(encoder->base.dev),
- enc_to_intel_dsi(&encoder->base));
+ struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+
+ get_dsi_io_power_domains(i915, enc_to_intel_dsi(&encoder->base));
+
+ if (crtc_state->dsc.compression_enable)
+ intel_display_power_get(i915,
+ intel_dsc_power_domain(crtc_state));
}
static bool gen11_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -1417,7 +1480,7 @@ static const struct drm_connector_funcs gen11_dsi_connector_funcs = {
static const struct drm_connector_helper_funcs gen11_dsi_connector_helper_funcs = {
.get_modes = intel_dsi_get_modes,
- .mode_valid = intel_dsi_mode_valid,
+ .mode_valid = gen11_dsi_mode_valid,
.atomic_check = intel_digital_connector_atomic_check,
};
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
