Re: [PATCH v3 06/13] drm/i915/dsc: add support for computing and writing PPS for DSI encoders

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 05 Dec 2019, "Kulkarni, Vandita" <vandita.kulkarni@xxxxxxxxx> wrote:
>> -----Original Message-----
>> From: Jani Nikula <jani.nikula@xxxxxxxxx>
>> Sent: Tuesday, November 26, 2019 7:13 PM
>> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
>> Cc: Nikula, Jani <jani.nikula@xxxxxxxxx>; Navare, Manasi D
>> <manasi.d.navare@xxxxxxxxx>; Kulkarni, Vandita
>> <vandita.kulkarni@xxxxxxxxx>; Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> Subject: [PATCH v3 06/13] drm/i915/dsc: add support for computing and
>> writing PPS for DSI encoders
>> 
>> Add DSI specific computation and transmission to display of PPS.
>> 
>> With hopes that this approach will work for both DP and DSI encoders.
>> 
>> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
>> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>> ---
>>  drivers/gpu/drm/i915/display/intel_vdsc.c | 25 ++++++++++++++++++++++-
>>  1 file changed, 24 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c
>> b/drivers/gpu/drm/i915/display/intel_vdsc.c
>> index c53024dfb1ec..7bd727129a8f 100644
>> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
>> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
>> @@ -10,6 +10,7 @@
>> 
>>  #include "i915_drv.h"
>>  #include "intel_display_types.h"
>> +#include "intel_dsi.h"
>>  #include "intel_vdsc.h"
>> 
>>  enum ROW_INDEX_BPP {
>> @@ -844,6 +845,25 @@ static void intel_dsc_pps_configure(struct
>> intel_encoder *encoder,
>>  	}
>>  }
>> 
>> +static void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
>> +				    const struct intel_crtc_state *crtc_state) {
>> +	const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
>> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> +	struct mipi_dsi_device *dsi;
>> +	struct drm_dsc_picture_parameter_set pps;
>> +	enum port port;
>> +
>> +	drm_dsc_pps_payload_pack(&pps, vdsc_cfg);
>> +
>> +	for_each_dsi_port(port, intel_dsi->ports) {
>> +		dsi = intel_dsi->dsi_hosts[port]->device;
>> +
>> +		mipi_dsi_picture_parameter_set(dsi, &pps);
>> +		mipi_dsi_compression_mode(dsi, true);
>> +	}
>> +}
>> +
>>  static void intel_dsc_dp_pps_write(struct intel_encoder *encoder,
>>  				   const struct intel_crtc_state *crtc_state)  {
>> @@ -882,7 +902,10 @@ void intel_dsc_enable(struct intel_encoder
>> *encoder,
>> 
> Slightly out of scope of this patch, but I see that while configuring PPS9, we are using direct macros and not using anything from
> vdsc_cfg->rc_model_size and we have not initialized vdsc_cfg-> rc_edge_factor

As mentioned on IRC, we'll need to fix this also for DP I think, and
that's indeed slightly out of scope here.

BR,
Jani.

>
>>  	intel_dsc_pps_configure(encoder, crtc_state);
>> 
> Other than that, this patch LGTM.
> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>
> Thanks,
> Vandita
>> -	intel_dsc_dp_pps_write(encoder, crtc_state);
>> +	if (encoder->type == INTEL_OUTPUT_DSI)
>> +		intel_dsc_dsi_pps_write(encoder, crtc_state);
>> +	else
>> +		intel_dsc_dp_pps_write(encoder, crtc_state);
>> 
>>  	if (crtc_state->cpu_transcoder == TRANSCODER_EDP) {
>>  		dss_ctl1_reg = DSS_CTL1;
>> --
>> 2.20.1
>

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux