[PATCH 03/18] drm/i915: Fix location of stolen memory register for SandyBridge+

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A few of the earlier registers where enlarged and so the Base Data of
Stolen Memory Register (BDSM) was pushed to 0xb0.

Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/i915_gem_stolen.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
index a01ff74..d023ed6 100644
--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -63,7 +63,14 @@ static unsigned long i915_stolen_to_physical(struct drm_device *dev)
 	 * its value of TOLUD.
 	 */
 	base = 0;
-	if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
+	if (INTEL_INFO(dev)->gen >= 6) {
+		/* Read Base Data of Stolen Memory Register (BDSM) directly.
+		 * Note that there is also a MCHBAR miror at 0x1080c0 or
+		 * we could use device 2:0x5c instead.
+		*/
+		pci_read_config_dword(pdev, 0xB0, &base);
+		base &= ~4095; /* lower bits used for locking register */
+	} else if (INTEL_INFO(dev)->gen > 3 || IS_G33(dev)) {
 		/* Read Graphics Base of Stolen Memory directly */
 		pci_read_config_dword(pdev, 0xA4, &base);
 #if 0
@@ -172,6 +179,9 @@ int i915_gem_init_stolen(struct drm_device *dev)
 	if (dev_priv->mm.stolen_base == 0)
 		return 0;
 
+	DRM_DEBUG_KMS("found %d bytes of stolen memory at %08lx\n",
+		      dev_priv->mm.gtt->stolen_size, dev_priv->mm.stolen_base);
+
 	/* Basic memrange allocator for stolen space */
 	drm_mm_init(&dev_priv->mm.stolen, 0, prealloc_size);
 
-- 
1.7.10.4



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux