On Tue, Nov 26, 2019 at 01:41:15PM -0800, Souza, Jose wrote:
> On Tue, 2019-11-26 at 13:07 -0800, Matt Roper wrote:
> > The bspec tells us 'Program SHPD_FILTER_CNT with the "500
> > microseconds
> > adjusted" value before enabling hotplug detection' on CNP+. We
> > haven't
> > been touching this register at all thus far, but we should probably
> > follow the bspec's guidance.
> >
> > The register also exists on LPT and SPT, but there isn't any specific
> > guidance I can find on how we should be programming it there so let's
> > leave it be for now.
> >
> > Bspec: 4342
> > Bspec: 31297
> > Bspec: 8407
> > Bspec: 49305
> > Bspec: 50473
> >
> > Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_irq.c | 5 +++++
> > drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> > 2 files changed, 9 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_irq.c
> > b/drivers/gpu/drm/i915/i915_irq.c
> > index dae00f7dd7df..028cb6239c12 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -2976,6 +2976,8 @@ static void icp_hpd_irq_setup(struct
> > drm_i915_private *dev_priv,
> > hotplug_irqs = sde_ddi_mask | sde_tc_mask;
> > enabled_irqs = intel_hpd_enabled_irqs(dev_priv, pins);
> >
> > + I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
> > +
> > ibx_display_interrupt_update(dev_priv, hotplug_irqs,
> > enabled_irqs);
> >
> > icp_hpd_detection_setup(dev_priv, ddi_enable_mask,
> > tc_enable_mask);
> > @@ -3081,6 +3083,9 @@ static void spt_hpd_irq_setup(struct
> > drm_i915_private *dev_priv)
> > {
> > u32 hotplug_irqs, enabled_irqs;
> >
> > + if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
> > + I915_WRITE(SHPD_FILTER_CNT, SHPD_FILTER_CNT_500_ADJ);
> > +
> > hotplug_irqs = SDE_HOTPLUG_MASK_SPT;
> > enabled_irqs = intel_hpd_enabled_irqs(dev_priv, hpd_spt);
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index 94d0f593eeb7..74cf45de162e 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -8110,6 +8110,10 @@ enum {
> >
> > #define SHOTPLUG_CTL_TC _MMIO(0xc4034)
> > #define ICP_TC_HPD_ENABLE(tc_port) (8 << (tc_port) * 4)
> > +
> > +#define SHPD_FILTER_CNT _MMIO(0xc4038)
> > +#define SHPD_FILTER_CNT_500_ADJ 0x001D9
>
> Shouldn't it be 0x1F2? Or I'm missing something?
> Also this is the default value.
>
0x1F2 is the "500 microseconds" option, whereas 0x1D9 is the "500
microseconds adjusted" option according to bspec 8407/50473. The
programming instructions tell us to use the non-default "adjusted"
variant.
I'm not sure why they don't just call it "475 microseconds" since that's
what this value really works out to...
Matt
>
> > +
> > /* Icelake DSC Rate Control Range Parameter Registers */
> > #define DSCA_RC_RANGE_PARAMETERS_0 _MMIO(0x6B240)
> > #define DSCA_RC_RANGE_PARAMETERS_0_UDW _MMIO(0x6B240 +
> > 4)
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
