Re: [PATCH 3/3] drm/i915/dc3co: Avoid full modeset when EXITLINE needs to be changed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019-10-31 at 17:14:22 -0700, José Roberto de Souza wrote:
> A recent change in BSpec allow us to change EXTLINE while transcoder
> is enabled so this allow us to change it even when doing the first
> fastset after taking over previous hardware state set by BIOS.
> BIOS don't enable PSR, so if sink supports PSR it will be enabled on
> the first fastset, so moving the EXTLINE compute and set to PSR flows
> allow us to simplfy a bunch of code.
> 
> This will save a lot of time in all the IGT tests that uses CRC, as
> when PSR2 is enabled CRCs are not generated, so we switch to PSR1, so
> the previous code would compute dc3co_exitline=0 causing a full
> modeset that would shutdown pipe, enable and train link.
> 
> BSpec: 49196
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Cc: Anshuman Gupta <anshuman.gupta@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c     | 86 --------------------
>  drivers/gpu/drm/i915/display/intel_display.c |  1 -
>  drivers/gpu/drm/i915/display/intel_psr.c     | 47 +++++++++++
>  3 files changed, 47 insertions(+), 87 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index b51f244ad7a5..f52fb7619d46 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -3339,86 +3339,6 @@ static void intel_ddi_disable_fec_state(struct intel_encoder *encoder,
>  	POSTING_READ(intel_dp->regs.dp_tp_ctl);
>  }
>  
> -static void
> -tgl_clear_psr2_transcoder_exitline(const struct intel_crtc_state *cstate)
> -{
> -	struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
> -	u32 val;
> -
> -	if (!cstate->dc3co_exitline)
> -		return;
> -
> -	val = I915_READ(EXITLINE(cstate->cpu_transcoder));
> -	val &= ~(EXITLINE_MASK | EXITLINE_ENABLE);
> -	I915_WRITE(EXITLINE(cstate->cpu_transcoder), val);
> -}
> -
> -static void
> -tgl_set_psr2_transcoder_exitline(const struct intel_crtc_state *cstate)
> -{
> -	u32 val, exit_scanlines;
> -	struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
> -
> -	if (!cstate->dc3co_exitline)
> -		return;
> -
> -	exit_scanlines = cstate->dc3co_exitline;
> -	exit_scanlines <<= EXITLINE_SHIFT;
> -	val = I915_READ(EXITLINE(cstate->cpu_transcoder));
> -	val &= ~(EXITLINE_MASK | EXITLINE_ENABLE);
> -	val |= exit_scanlines;
> -	val |= EXITLINE_ENABLE;
> -	I915_WRITE(EXITLINE(cstate->cpu_transcoder), val);
> -}
> -
> -static void tgl_dc3co_exitline_compute_config(struct intel_encoder *encoder,
> -					      struct intel_crtc_state *cstate)
> -{
> -	u32 exit_scanlines;
> -	struct drm_i915_private *dev_priv = to_i915(cstate->base.crtc->dev);
> -	u32 crtc_vdisplay = cstate->base.adjusted_mode.crtc_vdisplay;
> -
> -	cstate->dc3co_exitline = 0;
> -
> -	if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
> -		return;
> -
> -	/* B.Specs:49196 DC3CO only works with pipeA and DDIA.*/
> -	if (to_intel_crtc(cstate->base.crtc)->pipe != PIPE_A ||
> -	    encoder->port != PORT_A)
> -		return;
> -
> -	if (!cstate->has_psr2 || !cstate->base.active)
> -		return;
> -
> -	/*
> -	 * DC3CO Exit time 200us B.Spec 49196
> -	 * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1
> -	 */
> -	exit_scanlines =
> -		intel_usecs_to_scanlines(&cstate->base.adjusted_mode, 200) + 1;
> -
> -	if (WARN_ON(exit_scanlines > crtc_vdisplay))
> -		return;
> -
> -	cstate->dc3co_exitline = crtc_vdisplay - exit_scanlines;
> -	DRM_DEBUG_KMS("DC3CO exit scanlines %d\n", cstate->dc3co_exitline);
> -}
> -
> -static void tgl_dc3co_exitline_get_config(struct intel_crtc_state *crtc_state)
> -{
> -	u32 val;
> -	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
> -
> -	if (INTEL_GEN(dev_priv) < 12)
> -		return;
> -
> -	val = I915_READ(EXITLINE(crtc_state->cpu_transcoder));
> -
> -	if (val & EXITLINE_ENABLE)
> -		crtc_state->dc3co_exitline = val & EXITLINE_MASK;
> -}
> -
>  static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
>  				  const struct intel_crtc_state *crtc_state,
>  				  const struct drm_connector_state *conn_state)
> @@ -3431,7 +3351,6 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
>  	int level = intel_ddi_dp_level(intel_dp);
>  	enum transcoder transcoder = crtc_state->cpu_transcoder;
>  
> -	tgl_set_psr2_transcoder_exitline(crtc_state);
>  	intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
>  				 crtc_state->lane_count, is_mst);
>  
> @@ -3760,7 +3679,6 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
>  						  dig_port->ddi_io_power_domain);
>  
>  	intel_ddi_clk_disable(encoder);
> -	tgl_clear_psr2_transcoder_exitline(old_crtc_state);
>  }
>  
>  static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
> @@ -4308,9 +4226,6 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
>  		break;
>  	}
>  
> -	if (encoder->type == INTEL_OUTPUT_EDP)
> -		tgl_dc3co_exitline_get_config(pipe_config);
> -
>  	pipe_config->has_audio =
>  		intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
>  
> @@ -4392,7 +4307,6 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
>  		ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
>  	} else {
>  		ret = intel_dp_compute_config(encoder, pipe_config, conn_state);
> -		tgl_dc3co_exitline_compute_config(encoder, pipe_config);
>  	}
>  
>  	if (ret)
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 348ce0456696..6c1c93b2a81f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13091,7 +13091,6 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
>  
>  	PIPE_CONF_CHECK_I(pixel_multiplier);
>  	PIPE_CONF_CHECK_I(output_format);
> -	PIPE_CONF_CHECK_I(dc3co_exitline);
>  	PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
>  	if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
>  	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
> index bb9b5349b72a..06a0a1c9621e 100644
> --- a/drivers/gpu/drm/i915/display/intel_psr.c
> +++ b/drivers/gpu/drm/i915/display/intel_psr.c
> @@ -596,6 +596,37 @@ static void tgl_disallow_dc3co_on_psr2_exit(struct drm_i915_private *dev_priv)
>  	tgl_psr2_disable_dc3co(dev_priv);
>  }
>  
> +static void
> +tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp,
> +				  struct intel_crtc_state *crtc_state)
> +{
> +	const u32 crtc_vdisplay = crtc_state->base.adjusted_mode.crtc_vdisplay;
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> +	u32 exit_scanlines;
We wanted to explicitly clear dc3co_exitline in case it is not
supported.
> +
> +	if (!(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO))
> +		return;
> +
> +	/* B.Specs:49196 DC3CO only works with pipeA and DDIA.*/
> +	if (to_intel_crtc(crtc_state->base.crtc)->pipe != PIPE_A ||
> +	    dig_port->base.port != PORT_A)
> +		return;
> +
> +	/*
> +	 * DC3CO Exit time 200us B.Spec 49196
> +	 * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1
> +	 */
> +	exit_scanlines =
> +		intel_usecs_to_scanlines(&crtc_state->base.adjusted_mode, 200) + 1;
> +
> +	if (WARN_ON(exit_scanlines > crtc_vdisplay))
> +		return;
> +
> +	crtc_state->dc3co_exitline = crtc_vdisplay - exit_scanlines;
> +	DRM_DEBUG_KMS("DC3CO exit scanlines %d\n", crtc_state->dc3co_exitline);
> +}
> +
>  static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
>  				    struct intel_crtc_state *crtc_state)
>  {
> @@ -658,6 +689,7 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
>  		return false;
>  	}
>  
> +	tgl_dc3co_exitline_compute_config(intel_dp, crtc_state);
>  	return true;
>  }
>  
> @@ -775,6 +807,21 @@ static void intel_psr_enable_source(struct intel_dp *intel_dp,
>  	I915_WRITE(EDP_PSR_DEBUG(dev_priv->psr.transcoder), mask);
>  
>  	psr_irq_control(dev_priv);
> +
> +	if (INTEL_GEN(dev_priv) >= 12 && dev_priv->psr.psr2_enabled) {
IMHO we can use dc3co_enabled flag here instead of psr2_enabled, and it would be 
nice to have a seperate function to set the exitline here.
Thanks,
Anshuman Gupta.
> +		u32 val;
> +
> +		/*
> +		 * TODO: if future platforms supports DC3CO in more than one
> +		 * transcoder, EXITLINE will need to be unset when disabling PSR
> +		 */
> +		val = I915_READ(EXITLINE(cpu_transcoder));
> +		val &= ~(EXITLINE_MASK | EXITLINE_ENABLE);
> +		val |= crtc_state->dc3co_exitline << EXITLINE_SHIFT;
> +		if (crtc_state->dc3co_exitline)
> +			val |= EXITLINE_ENABLE;
> +		I915_WRITE(EXITLINE(cpu_transcoder), val);
> +	}
>  }
>  
>  static void intel_psr_enable_locked(struct drm_i915_private *dev_priv,
> -- 
> 2.23.0
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux