From: Paulo Zanoni <paulo.r.zanoni at intel.com>
And the right time is exactly after/before changing PIPE_CONF. See the
documentation about the mode set sequence.
This code is not inside any encoder-specific callback because
DDI_FUNC_CTL is part of the pipe, so it is used by all encoders.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_ddi.c | 83 +++++++++++++++++++++++++++---------
drivers/gpu/drm/i915/intel_display.c | 6 +++
drivers/gpu/drm/i915/intel_drv.h | 3 ++
4 files changed, 74 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5107cee..d1b58d0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4394,6 +4394,7 @@
/* Those bits are ignored by pipe EDP since it can only connect to DDI A */
#define PIPE_DDI_PORT_MASK (7<<28)
#define PIPE_DDI_SELECT_PORT(x) ((x)<<28)
+#define PIPE_DDI_PORT_NONE (0<<28)
#define PIPE_DDI_MODE_SELECT_MASK (7<<24)
#define PIPE_DDI_MODE_SELECT_HDMI (0<<24)
#define PIPE_DDI_MODE_SELECT_DVI (1<<24)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index d912dbf..4ee3038 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -203,15 +203,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
- /* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
- temp = I915_READ(DDI_FUNC_CTL(pipe));
- temp &= ~PIPE_DDI_PORT_MASK;
- temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
- PIPE_DDI_MODE_SELECT_FDI |
- PIPE_DDI_FUNC_ENABLE |
- PIPE_DDI_PORT_WIDTH_X2;
- I915_WRITE(DDI_FUNC_CTL(pipe),
- temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
@@ -657,7 +648,7 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
int port = intel_hdmi->ddi_port;
int pipe = intel_crtc->pipe;
int p, n2, r2;
- u32 temp, i;
+ u32 i;
/* On Haswell, we need to enable the clocks and prepare DDI function to
* work in HDMI mode for this pipe.
@@ -715,8 +706,40 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
intel_write_eld(encoder, adjusted_mode);
}
+ intel_hdmi->set_infoframes(encoder, adjusted_mode);
+}
+
+static struct intel_encoder *
+intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder, *ret = NULL;
+ int num_encoders = 0;
+
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ ret = intel_encoder;
+ num_encoders++;
+ }
+
+ if (num_encoders != 1)
+ WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
+ intel_crtc->pipe);
+
+ BUG_ON(ret == NULL);
+ return ret;
+}
+
+void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
+ struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+ enum pipe pipe = intel_crtc->pipe;
+ uint32_t temp;
+
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
- temp = PIPE_DDI_FUNC_ENABLE | PIPE_DDI_SELECT_PORT(port);
+ temp = PIPE_DDI_FUNC_ENABLE;
switch (intel_crtc->bpp) {
case 18:
@@ -736,19 +759,41 @@ void intel_ddi_mode_set(struct drm_encoder *encoder,
intel_crtc->bpp);
}
- if (intel_hdmi->has_hdmi_sink)
- temp |= PIPE_DDI_MODE_SELECT_HDMI;
- else
- temp |= PIPE_DDI_MODE_SELECT_DVI;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
temp |= PIPE_DDI_PVSYNC;
- if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= PIPE_DDI_PHSYNC;
+ if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+ struct intel_hdmi *intel_hdmi =
+ enc_to_intel_hdmi(&intel_encoder->base);
+
+ if (intel_hdmi->has_hdmi_sink)
+ temp |= PIPE_DDI_MODE_SELECT_HDMI;
+ else
+ temp |= PIPE_DDI_MODE_SELECT_DVI;
+
+ temp |= PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port);
+ } else if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
+ temp |= PIPE_DDI_MODE_SELECT_FDI;
+ temp |= PIPE_DDI_SELECT_PORT(PORT_E);
+ } else {
+ WARN(1, "Invalid encoder type %d for pipe %d\n",
+ intel_encoder->type, pipe);
+ }
+
I915_WRITE(DDI_FUNC_CTL(pipe), temp);
+}
- intel_hdmi->set_infoframes(encoder, adjusted_mode);
+void intel_ddi_disable_pipe_func(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ uint32_t reg = DDI_FUNC_CTL(pipe);
+ uint32_t val = I915_READ(reg);
+
+ val &= ~(PIPE_DDI_FUNC_ENABLE | PIPE_DDI_PORT_MASK);
+ val |= PIPE_DDI_PORT_NONE;
+ I915_WRITE(reg, val);
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 40f98d1..e4f07a2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3215,6 +3215,9 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
*/
intel_crtc_load_lut(crtc);
+ if (IS_HASWELL(dev))
+ intel_ddi_enable_pipe_func(crtc);
+
intel_enable_pipe(dev_priv, pipe, is_pch_port);
intel_enable_plane(dev_priv, plane, pipe);
@@ -3262,6 +3265,9 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
intel_disable_pipe(dev_priv, pipe);
+ if (IS_HASWELL(dev))
+ intel_ddi_disable_pipe_func(dev_priv, pipe);
+
/* Disable PF */
I915_WRITE(PF_CTL(pipe), 0);
I915_WRITE(PF_WIN_SZ(pipe), 0);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 57566b7..0253bb4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -581,5 +581,8 @@ extern void intel_ddi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
extern void intel_ddi_pll_init(struct drm_device *dev);
+extern void intel_ddi_enable_pipe_func(struct drm_crtc *crtc);
+extern void intel_ddi_disable_pipe_func(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
#endif /* __INTEL_DRV_H__ */
--
1.7.11.4
