On Mon, Oct 14, 2019 at 05:05:33PM -0700, Radhakrishna Sripada wrote:
> Render Decompression is supported with Y-Tiled main surface. The CCS is
> linear and has 4 bits of data for each main surface cache line pair, a
> ratio of 1:256. Additional Clear Color information is passed from the
> user-space through an offset in the GEM BO. Add a new modifier to identify
> and parse new Clear Color information and extend Gen12 render decompression
> functionality to the newly added modifier.
>
> v2: Fix has_alpha flag for modifiers, omit CC modifier during initial
> plane config(Matt). Fix Lookup error.
> v3: Fix the panic while running kms_cube
> v4: Add alignment check and reuse the comments for ge12_ccs_formats(Matt)
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxx>
> Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx>
> Cc: Rafael Antognolli <rafael.antognolli@xxxxxxxxx>
> Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Cc: Nanley G Chery <nanley.g.chery@xxxxxxxxx>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@xxxxxxxxx>
One minor typo and one documentation suggestion, but aside from fixing
those this patch looks good to me:
Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
The previous patch that adds the modifier looks fine to me too, but I
figure we should leave it to whoever is working on the corresponding
userspace code to ack/rb that one.
Matt
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++
> .../drm/i915/display/intel_display_types.h | 3 ++
> drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++-
> drivers/gpu/drm/i915/i915_reg.h | 12 +++++
> 4 files changed, 77 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 448168a4d780..8835920cb005 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1917,6 +1917,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
> if (color_plane == 1)
> return 64;
> /* fall through */
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> + if (color_plane == 1 || color_plane == 2)
> + return 64;
> + /* fall through */
> case I915_FORMAT_MOD_Y_TILED:
> if (IS_GEN(dev_priv, 2) || HAS_128_BYTE_Y_TILING(dev_priv))
> return 128;
> @@ -2058,6 +2062,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
> return 256 * 1024;
> return 0;
> case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> return 16 * 1024;
> case I915_FORMAT_MOD_Y_TILED_CCS:
> case I915_FORMAT_MOD_Yf_TILED_CCS:
> @@ -2260,6 +2265,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)
> return true;
> case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> return color_plane == 1;
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> + return color_plane == 1 || color_plane == 2;
> case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
> return color_plane == 1 || color_plane == 3;
> default:
> @@ -2453,6 +2460,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
> case I915_FORMAT_MOD_Y_TILED_CCS:
> case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS:
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> return I915_TILING_Y;
> default:
> return I915_TILING_NONE;
> @@ -2506,6 +2514,21 @@ static const struct drm_format_info gen12_ccs_formats[] = {
> .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true },
> };
>
> +/*
> + * Same as gen12_ccs_formats[] above, but with additional surface used
> + * top pass Clear Color information in plane 2 with 64 bits of data.
s/top/to
> + */
> +static const struct drm_format_info gen12_ccs_cc_formats[] = {
> + { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 3,
> + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
> + { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 3,
> + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
> + { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 3,
> + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
> + { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 3,
> + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
> +};
> +
> static const struct drm_format_info *
> lookup_format_info(const struct drm_format_info formats[],
> int num_formats, u32 format)
> @@ -2533,6 +2556,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
> return lookup_format_info(gen12_ccs_formats,
> ARRAY_SIZE(gen12_ccs_formats),
> cmd->pixel_format);
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> + return lookup_format_info(gen12_ccs_cc_formats,
> + ARRAY_SIZE(gen12_ccs_cc_formats),
> + cmd->pixel_format);
> default:
> return NULL;
> }
> @@ -2542,6 +2569,7 @@ bool is_ccs_modifier(u64 modifier)
> {
> return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
> modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
> + modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ||
> modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
> }
> @@ -2729,6 +2757,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)
> return false;
> else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)
> return color_plane == 3 || color_plane == 1;
> + else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
> + return color_plane == 1 || color_plane == 2;
> else
> return color_plane == 1;
> }
> @@ -2797,6 +2827,18 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
> int x, y;
> int ret;
>
> + /*
> + * Plane 2 of Render Compression with Clear Color fb modifier is consumed
> + * by the driver and not passed to DE. Skip the arithmetic related to
These comment lines are >80 characters and should be re-wrapped.
> + * alignment and offset calculation.
> + */
> + if (i == 2 && fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
> + if (IS_ALIGNED(fb->offsets[2], PAGE_SIZE))
> + continue;
> + else
> + return -EINVAL;
> + }
> +
> cpp = fb->format->cpp[i];
> intel_fb_plane_dims(&width, &height, fb, i);
>
> @@ -4263,6 +4305,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)
> case I915_FORMAT_MOD_Y_TILED:
> return PLANE_CTL_TILED_Y;
> case I915_FORMAT_MOD_Y_TILED_CCS:
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> return PLANE_CTL_TILED_Y | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
> case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> return PLANE_CTL_TILED_Y |
> @@ -14586,6 +14629,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
>
> plane_state->vma = vma;
>
> + if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
> + u32 *ccaddr = kmap_atomic(i915_gem_object_get_page(intel_fb_obj(fb),
> + fb->offsets[2] >> PAGE_SHIFT));
> +
> + plane_state->ccval = ((u64)*(ccaddr + CC_VAL_HIGHER_OFFSET) << 32)
> + | *(ccaddr + CC_VAL_LOWER_OFFSET);
I think it would be good to document what the expected format is, either
through comments and/or through a structure definition that describes
the exact layout. As you mentioned before, some of the bytes provided
by the render engine aren't used by the display engine, so a more formal
description of the layout would make this easier to understand.
> + kunmap_atomic(ccaddr);
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 91241f2bc575..213899e202a3 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -579,6 +579,9 @@ struct intel_plane_state {
> u32 planar_slave;
>
> struct drm_intel_sprite_colorkey ckey;
> +
> + /* Clear Color Value */
> + u64 ccval;
> };
>
> struct intel_initial_plane_config {
> diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
> index fdb9dcc4060c..baf1351910ca 100644
> --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> @@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,
> u32 plane_color_ctl = 0;
> unsigned long irqflags;
> u32 keymsk, keymax;
> + u64 ccval = plane_state->ccval;
>
> plane_ctl |= skl_plane_ctl_crtc(crtc_state);
>
> @@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,
> if (fb->format->is_yuv && icl_is_hdr_plane(dev_priv, plane_id))
> icl_program_input_csc(plane, crtc_state, plane_state);
>
> + if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
> + intel_uncore_write64_fw(&dev_priv->uncore,
> + PLANE_CC_VAL(pipe, plane_id), ccval);
> +
> skl_write_plane_wm(plane, crtc_state);
>
> I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
> @@ -1739,7 +1744,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state,
> fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS ||
> fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
> - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) {
> + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ||
> + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {
> DRM_DEBUG_KMS("Y/Yf tiling not supported in IF-ID mode\n");
> return -EINVAL;
> }
> @@ -2154,6 +2160,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {
> static const u64 gen12_plane_format_modifiers_mc_ccs[] = {
> I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS,
> I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS,
> + I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC,
> I915_FORMAT_MOD_Y_TILED,
> I915_FORMAT_MOD_X_TILED,
> DRM_FORMAT_MOD_LINEAR,
> @@ -2162,6 +2169,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {
>
> static const u64 gen12_plane_format_modifiers_rc_ccs[] = {
> I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS,
> + I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC,
> I915_FORMAT_MOD_Y_TILED,
> I915_FORMAT_MOD_X_TILED,
> DRM_FORMAT_MOD_LINEAR,
> @@ -2335,6 +2343,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,
> case I915_FORMAT_MOD_X_TILED:
> case I915_FORMAT_MOD_Y_TILED:
> case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> break;
> default:
> return false;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 5fad9cb35979..d8883ad99a67 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6743,6 +6743,8 @@ enum {
> #define _PLANE_KEYMAX_1_A 0x701a0
> #define _PLANE_KEYMAX_2_A 0x702a0
> #define PLANE_KEYMAX_ALPHA(a) ((a) << 24)
> +#define _PLANE_CC_VAL_1_A 0x701b4
> +#define _PLANE_CC_VAL_2_A 0x702b4
> #define _PLANE_AUX_DIST_1_A 0x701c0
> #define _PLANE_AUX_DIST_2_A 0x702c0
> #define _PLANE_AUX_OFFSET_1_A 0x701c4
> @@ -6782,6 +6784,16 @@ enum {
> #define _PLANE_NV12_BUF_CFG_1_A 0x70278
> #define _PLANE_NV12_BUF_CFG_2_A 0x70378
>
> +#define _PLANE_CC_VAL_1_B 0x711b4
> +#define _PLANE_CC_VAL_2_B 0x712b4
> +#define _PLANE_CC_VAL_1(pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B)
> +#define _PLANE_CC_VAL_2(pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B)
> +#define PLANE_CC_VAL(pipe, plane) \
> + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe))
> +
> +#define CC_VAL_LOWER_OFFSET 4
> +#define CC_VAL_HIGHER_OFFSET 5
> +
> /* Input CSC Register Definitions */
> #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0
> #define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0
> --
> 2.20.1
>
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
