This patch adds a scaling filter mode porperty to allow: - A driver/HW to showcase it's scaling filter capabilities. - A userspace to pick a desired effect while scaling. This option will be particularly useful in the scenarios where Integer mode scaling is possible, and a UI client wants to pick filters like Nearest-neighbor applied for non-blurry outputs. There was a RFC patch series published, to discus the request to enable Integer mode scaling by some of the gaming communities, which can be found here: https://patchwork.freedesktop.org/series/66175/ Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx> --- drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++ include/drm/drm_crtc.h | 26 ++++++++++++++++++++++++++ include/drm/drm_mode_config.h | 6 ++++++ 3 files changed, 36 insertions(+) diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index 0d466d3b0809..883329453a86 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -435,6 +435,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc, return ret; } else if (property == config->prop_vrr_enabled) { state->vrr_enabled = val; + } else if (property == config->scaling_filter_property) { + state->scaling_filter = val; } else if (property == config->degamma_lut_property) { ret = drm_atomic_replace_property_blob_from_id(dev, &state->degamma_lut, @@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc, *val = (state->gamma_lut) ? state->gamma_lut->base.id : 0; else if (property == config->prop_out_fence_ptr) *val = 0; + else if (property == config->scaling_filter_property) + *val = state->scaling_filter; else if (crtc->funcs->atomic_get_property) return crtc->funcs->atomic_get_property(crtc, state, property, val); else diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 5e9b15a0e8c5..94c5509474a8 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -58,6 +58,25 @@ struct device_node; struct dma_fence; struct edid; +enum drm_scaling_filters { + DRM_SCALING_FILTER_DEFAULT, + DRM_SCALING_FILTER_MEDIUM, + DRM_SCALING_FILTER_BILINEAR, + DRM_SCALING_FILTER_NN, + DRM_SCALING_FILTER_NN_IS_ONLY, + DRM_SCALING_FILTER_EDGE_ENHANCE, + DRM_SCALING_FILTER_INVALID, +}; + +static const struct drm_prop_enum_list drm_scaling_filter_enum_list[] = { + { DRM_SCALING_FILTER_DEFAULT, "Default" }, + { DRM_SCALING_FILTER_MEDIUM, "Medium" }, + { DRM_SCALING_FILTER_BILINEAR, "Bilinear" }, + { DRM_SCALING_FILTER_NN, "Nearest Neighbor" }, + { DRM_SCALING_FILTER_NN_IS_ONLY, "Integer Mode Scaling" }, + { DRM_SCALING_FILTER_INVALID, "Invalid" }, +}; + static inline int64_t U642I64(uint64_t val) { return (int64_t)*((int64_t *)&val); @@ -283,6 +302,13 @@ struct drm_crtc_state { */ u32 target_vblank; + /** + * @scaling_filter: + * + * Scaling filter mode to be applied + */ + u32 scaling_filter; + /** * @async_flip: * diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 3bcbe30339f0..efd6fd55770f 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -914,6 +914,12 @@ struct drm_mode_config { */ struct drm_property *modifiers_property; + /** + * @scaling_filter_property: CRTC property to apply a particular filter + * while scaling in panel fitter mode. + */ + struct drm_property *scaling_filter_property; + /* cursor size */ uint32_t cursor_width, cursor_height; -- 2.17.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
