From: Paulo Zanoni <paulo.r.zanoni at intel.com>
The old rule that the AUX registers are just an offset (+4 and +10)
from output_reg is not true anymore, since output_reg in on the CPU
and some AUX regs are on the PCH.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a907d5b0..982985c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2547,6 +2547,14 @@
#define DPD_AUX_CH_DATA4 0x64320
#define DPD_AUX_CH_DATA5 0x64324
+#define PCH_DPB_AUX_CH_CTL 0xe4110
+#define PCH_DPC_AUX_CH_CTL 0xe4210
+#define PCH_DPD_AUX_CH_CTL 0xe4310
+
+#define PCH_DPB_AUX_CH_DATA 0xe4114
+#define PCH_DPC_AUX_CH_DATA 0xe4214
+#define PCH_DPD_AUX_CH_DATA 0xe4314
+
#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31)
#define DP_AUX_CH_CTL_DONE (1 << 30)
#define DP_AUX_CH_CTL_INTERRUPT (1 << 29)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 22702df..a40df1e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -356,6 +356,30 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
uint32_t aux_clock_divider;
int try, precharge;
+ if (IS_HASWELL(dev)) {
+ switch (intel_dp->port) {
+ case PORT_A:
+ ch_ctl = DPA_AUX_CH_CTL;
+ ch_data = DPA_AUX_CH_DATA1;
+ break;
+ case PORT_B:
+ ch_ctl = PCH_DPB_AUX_CH_CTL;
+ ch_data = PCH_DPB_AUX_CH_DATA;
+ break;
+ case PORT_C:
+ ch_ctl = PCH_DPC_AUX_CH_CTL;
+ ch_data = PCH_DPC_AUX_CH_DATA;
+ break;
+ case PORT_D:
+ ch_ctl = PCH_DPD_AUX_CH_CTL;
+ ch_data = PCH_DPD_AUX_CH_DATA;
+ break;
+ default:
+ WARN(1, "Invalid port %c\n", port_name(intel_dp->port));
+ break;
+ }
+ }
+
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
* and would like to run at 2MHz. So, take the
--
1.7.10.4
