On Wed, Sep 25, 2019 at 03:58:31PM -0700, Derek Basehore wrote:
> Devicetree systems can set panel orientation via a panel binding, but
> there's no way, as is, to propagate this setting to the connector,
> where the property need to be added.
> To address this, this patch sets orientation, as well as other fixed
> values for the panel, in the drm_panel_attach function. These values
> are stored from probe in the drm_panel struct.
>
> Signed-off-by: Derek Basehore <dbasehore@xxxxxxxxxxxx>
> Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/drm_panel.c | 28 +++++++++++++++++++++
> include/drm/drm_panel.h | 50 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 78 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index 0909b53b74e6..1cd2b56c9fe6 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
> */
> int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
> {
> + struct drm_display_info *info;
> +
> if (panel->connector)
> return -EBUSY;
>
> panel->connector = connector;
> panel->drm = connector->dev;
> + info = &connector->display_info;
> + info->width_mm = panel->width_mm;
> + info->height_mm = panel->height_mm;
> + info->bpc = panel->bpc;
> + info->panel_orientation = panel->orientation;
> + info->bus_flags = panel->bus_flags;
> + if (panel->bus_formats)
> + drm_display_info_set_bus_formats(&connector->display_info,
> + panel->bus_formats,
> + panel->num_bus_formats);
>
> return 0;
> }
> @@ -126,6 +138,22 @@ EXPORT_SYMBOL(drm_panel_attach);
> */
> void drm_panel_detach(struct drm_panel *panel)
> {
> + struct drm_display_info *info;
> +
> + if (!panel->connector)
> + goto out;
> +
> + info = &panel->connector->display_info;
> + info->width_mm = 0;
> + info->height_mm = 0;
> + info->bpc = 0;
> + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> + info->bus_flags = 0;
> + kfree(info->bus_formats);
> + info->bus_formats = NULL;
> + info->num_bus_formats = 0;
> +
> +out:
> panel->connector = NULL;
> panel->drm = NULL;
> }
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index d16158deacdc..f3587a54b8ac 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -141,6 +141,56 @@ struct drm_panel {
> */
> const struct drm_panel_funcs *funcs;
>
All these new added members seems dupliated with drm_display_info,
So I think, can we add a new drm_plane_funcs func:
int (*set_display_info)(struct drm_panel *panel,
struct drm_display_info *info);
Then in drm_panel_attach(), via this interface the specific panel
driver can directly set connector->display_info. like
...
if (panel->funcs && panel->funcs->set_display_info)
panel->funcs->unprepare(panel, connector->display_info);
...
Thanks
James
> + /**
> + * @width_mm:
> + *
> + * Physical width in mm.
> + */
> + unsigned int width_mm;
> +
> + /**
> + * @height_mm:
> + *
> + * Physical height in mm.
> + */
> + unsigned int height_mm;
> +
> + /**
> + * @bpc:
> + *
> + * Maximum bits per color channel. Used by HDMI and DP outputs.
> + */
> + unsigned int bpc;
> +
> + /**
> + * @orientation
> + *
> + * Installation orientation of the panel with respect to the chassis.
> + */
> + int orientation;
> +
> + /**
> + * @bus_formats
> + *
> + * Pixel data format on the wire.
> + */
> + const u32 *bus_formats;
> +
> + /**
> + * @num_bus_formats:
> + *
> + * Number of elements pointed to by @bus_formats
> + */
> + unsigned int num_bus_formats;
> +
> + /**
> + * @bus_flags:
> + *
> + * Additional information (like pixel signal polarity) for the pixel
> + * data on the bus.
> + */
> + u32 bus_flags;
> +
> /**
> * @list:
> *
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
