Op 26-09-2019 om 18:22 schreef Ville Syrjälä:
> On Thu, Sep 26, 2019 at 11:47:25AM +0200, Maarten Lankhorst wrote:
>> This can all be done from the intel_update_crtc function. Split out the
>> pipe update into a separate function, just like is done for the planes.
>> Pull in all the changes done during fastset as well. It makes no sense
>> for it to still exist as a separate function.
>>
>> Changes since v1:
>> - Inline intel_update_pipe_config()
>> Changes since v2:
>> - Add comments suggested by matt.
>> - Reorder commit_pipe_config() to remove all nesting. (Ville, Matt)
>> - Use intel_set_pipe_src_size((). (Matt)
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/i915/display/intel_display.c | 206 +++++++++----------
>> 1 file changed, 95 insertions(+), 111 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
>> index b77574cda648..239e0ca3e3ec 100644
>> --- a/drivers/gpu/drm/i915/display/intel_display.c
>> +++ b/drivers/gpu/drm/i915/display/intel_display.c
>> @@ -136,8 +136,6 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
>> const struct intel_crtc_state *pipe_config);
>> static void chv_prepare_pll(struct intel_crtc *crtc,
>> const struct intel_crtc_state *pipe_config);
>> -static void intel_begin_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
>> -static void intel_finish_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
>> static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>> struct intel_crtc_state *crtc_state);
>> static void skylake_pfit_enable(const struct intel_crtc_state *crtc_state);
>> @@ -4409,45 +4407,6 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
>> I915_WRITE(PIPE_CHICKEN(pipe), tmp);
>> }
>>
>> -static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
>> - const struct intel_crtc_state *new_crtc_state)
>> -{
>> - struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
>> - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> -
>> - /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
>> - crtc->base.mode = new_crtc_state->uapi.mode;
>> -
>> - /*
>> - * Update pipe size and adjust fitter if needed: the reason for this is
>> - * that in compute_mode_changes we check the native mode (not the pfit
>> - * mode) to see if we can flip rather than do a full mode set. In the
>> - * fastboot case, we'll flip, but if we don't update the pipesrc and
>> - * pfit state, we'll end up with a big fb scanned out into the wrong
>> - * sized surface.
>> - */
>> -
>> - I915_WRITE(PIPESRC(crtc->pipe),
>> - ((new_crtc_state->pipe_src_w - 1) << 16) |
>> - (new_crtc_state->pipe_src_h - 1));
>> -
>> - /* on skylake this is done by detaching scalers */
>> - if (INTEL_GEN(dev_priv) >= 9) {
>> - skl_detach_scalers(new_crtc_state);
>> -
>> - if (new_crtc_state->pch_pfit.enabled)
>> - skylake_pfit_enable(new_crtc_state);
>> - } else if (HAS_PCH_SPLIT(dev_priv)) {
>> - if (new_crtc_state->pch_pfit.enabled)
>> - ironlake_pfit_enable(new_crtc_state);
>> - else if (old_crtc_state->pch_pfit.enabled)
>> - ironlake_pfit_disable(old_crtc_state);
>> - }
>> -
>> - if (INTEL_GEN(dev_priv) >= 11)
>> - icl_set_pipe_chicken(crtc);
>> -}
>> -
>> static void intel_fdi_normal_train(struct intel_crtc *crtc)
>> {
>> struct drm_device *dev = crtc->base.dev;
>> @@ -13739,13 +13698,91 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
>> return crtc->base.funcs->get_vblank_counter(&crtc->base);
>> }
>>
>> +void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
>> + struct intel_crtc_state *crtc_state)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> +
>> + if (!IS_GEN(dev_priv, 2))
>> + intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
>> +
>> + if (crtc_state->has_pch_encoder) {
>> + enum pipe pch_transcoder =
>> + intel_crtc_pch_transcoder(crtc);
>> +
>> + intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
>> + }
>> +}
>> +
>> +static void commit_pipe_config(struct intel_atomic_state *state,
>> + struct intel_crtc_state *old_crtc_state,
>> + struct intel_crtc_state *new_crtc_state)
>> +{
>> + struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
>> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
>> + bool modeset = needs_modeset(new_crtc_state);
>> +
>> + if (dev_priv->display.atomic_update_watermarks)
>> + dev_priv->display.atomic_update_watermarks(state,
>> + new_crtc_state);
> Moving this here widens the gap between programming the FIFO split and
> programming the planes on VLV/CHV. I'd prefer to keep this at the end
> to keep it as close to the plane programming as possible.
It wouldn't, only on fastset and color updates.
>> +
>> + /*
>> + * During modesets pipe configuration was programmed as the
>> + * CRTC was enabled.
>> + */
>> + if (modeset)
>> + return;
>> +
>> + if (INTEL_GEN(dev_priv) >= 9)
>> + skl_detach_scalers(new_crtc_state);
> Similarly I'd move this downwards past the next two things to get
> it a bit closer to the pfit/plane programming.
Sigh!
>> +
>> + if (new_crtc_state->uapi.color_mgmt_changed ||
>> + new_crtc_state->update_pipe)
>> + intel_color_commit(new_crtc_state);
>> +
>> + if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
>> + bdw_set_pipemisc(new_crtc_state);
>> +
>> + if (!new_crtc_state->update_pipe)
>> + return;
>> +
>> + /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
>> + crtc->base.mode = new_crtc_state->uapi.mode;
>> +
>> + /*
>> + * Update pipe size and adjust fitter if needed: the reason for this is
>> + * that in compute_mode_changes we check the native mode (not the pfit
>> + * mode) to see if we can flip rather than do a full mode set. In the
>> + * fastboot case, we'll flip, but if we don't update the pipesrc and
>> + * pfit state, we'll end up with a big fb scanned out into the wrong
>> + * sized surface.
>> + */
>> + intel_set_pipe_src_size(new_crtc_state);
>> +
>> + if (INTEL_GEN(dev_priv) >= 9) {
>> + /*
>> + * enable pipe scaler here if needed, if
>> + * it's disabled, that's done by
>> + * skl_detach_scalers() above.
>> + */
>> + skylake_pfit_enable(new_crtc_state);
>> + } else if (HAS_PCH_SPLIT(dev_priv)) {
>> + if (!new_crtc_state->pch_pfit.enabled)
>> + ironlake_pfit_disable(old_crtc_state);
>> + else
>> + ironlake_pfit_enable(new_crtc_state);
>> + }
>> +
>> + if (INTEL_GEN(dev_priv) >= 11)
>> + icl_set_pipe_chicken(crtc);
>> +}
>> +
>> static void intel_update_crtc(struct intel_crtc *crtc,
>> struct intel_atomic_state *state,
>> struct intel_crtc_state *old_crtc_state,
>> struct intel_crtc_state *new_crtc_state)
>> {
>> - struct drm_device *dev = state->base.dev;
>> - struct drm_i915_private *dev_priv = to_i915(dev);
>> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
>> bool modeset = needs_modeset(new_crtc_state);
>> struct intel_plane_state *new_plane_state =
>> intel_atomic_get_new_plane_state(state,
>> @@ -13769,14 +13806,27 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>> else if (new_plane_state)
>> intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
>>
>> - intel_begin_crtc_commit(state, crtc);
>> + /* Perform vblank evasion around commit operation */
>> + intel_pipe_update_start(new_crtc_state);
>> +
>> + commit_pipe_config(state, old_crtc_state, new_crtc_state);
>>
>> if (INTEL_GEN(dev_priv) >= 9)
>> skl_update_planes_on_crtc(state, crtc);
>> else
>> i9xx_update_planes_on_crtc(state, crtc);
>>
>> - intel_finish_crtc_commit(state, crtc);
>> + intel_pipe_update_end(new_crtc_state);
>> +
>> + /*
>> + * We usually enable FIFO underrun interrupts as part of the
>> + * CRTC enable sequence during modesets. But when we inherit a
>> + * valid pipe configuration from the BIOS we need to take care
>> + * of enabling them on the CRTC's first fastset.
>> + */
>> + if (new_crtc_state->update_pipe && !modeset &&
>> + old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
>> + intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
>> }
>>
>> static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
>> @@ -14573,72 +14623,6 @@ skl_max_scale(const struct intel_crtc_state *crtc_state,
>> return max_scale;
>> }
>>
>> -static void intel_begin_crtc_commit(struct intel_atomic_state *state,
>> - struct intel_crtc *crtc)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> - struct intel_crtc_state *old_crtc_state =
>> - intel_atomic_get_old_crtc_state(state, crtc);
>> - struct intel_crtc_state *new_crtc_state =
>> - intel_atomic_get_new_crtc_state(state, crtc);
>> - bool modeset = needs_modeset(new_crtc_state);
>> -
>> - /* Perform vblank evasion around commit operation */
>> - intel_pipe_update_start(new_crtc_state);
>> -
>> - if (modeset)
>> - goto out;
>> -
>> - if (new_crtc_state->uapi.color_mgmt_changed ||
>> - new_crtc_state->update_pipe)
>> - intel_color_commit(new_crtc_state);
>> -
>> - if (new_crtc_state->update_pipe)
>> - intel_update_pipe_config(old_crtc_state, new_crtc_state);
>> - else if (INTEL_GEN(dev_priv) >= 9)
>> - skl_detach_scalers(new_crtc_state);
>> -
>> - if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
>> - bdw_set_pipemisc(new_crtc_state);
>> -
>> -out:
>> - if (dev_priv->display.atomic_update_watermarks)
>> - dev_priv->display.atomic_update_watermarks(state,
>> - new_crtc_state);
>> -}
>> -
>> -void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
>> - struct intel_crtc_state *crtc_state)
>> -{
>> - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>> -
>> - if (!IS_GEN(dev_priv, 2))
>> - intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
>> -
>> - if (crtc_state->has_pch_encoder) {
>> - enum pipe pch_transcoder =
>> - intel_crtc_pch_transcoder(crtc);
>> -
>> - intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
>> - }
>> -}
>> -
>> -static void intel_finish_crtc_commit(struct intel_atomic_state *state,
>> - struct intel_crtc *crtc)
>> -{
>> - struct intel_crtc_state *old_crtc_state =
>> - intel_atomic_get_old_crtc_state(state, crtc);
>> - struct intel_crtc_state *new_crtc_state =
>> - intel_atomic_get_new_crtc_state(state, crtc);
>> -
>> - intel_pipe_update_end(new_crtc_state);
>> -
>> - if (new_crtc_state->update_pipe &&
>> - !needs_modeset(new_crtc_state) &&
>> - old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
>> - intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
>> -}
>> -
>> /**
>> * intel_plane_destroy - destroy a plane
>> * @plane: plane to destroy
>> --
>> 2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
