Enable dc3co state in enable_dc module param and add dc3co
enable mask to allowed_dc_mask and gen9_dc_mask.
v1: Adding enable_dc=3,4 options to enable DC3CO with DC5 and DC6
independently. [Animesh]
v2: Using a switch statement for cleaner code. [Animesh]
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: Imre Deak <imre.deak@xxxxxxxxx>
Cc: Animesh Manna <animesh.manna@xxxxxxxxx>
Reviewed-by: Animesh Manna <animesh.manna@xxxxxxxxx>
Signed-off-by: Anshuman Gupta <anshuman.gupta@xxxxxxxxx>
---
.../drm/i915/display/intel_display_power.c | 29 +++++++++++++++----
drivers/gpu/drm/i915/i915_params.c | 3 +-
2 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index f1186bc23542..0b685c517bcb 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -711,7 +711,11 @@ static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
u32 mask;
mask = DC_STATE_EN_UPTO_DC5;
- if (INTEL_GEN(dev_priv) >= 11)
+
+ if (INTEL_GEN(dev_priv) >= 12)
+ mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6
+ | DC_STATE_EN_DC9;
+ else if (IS_GEN(dev_priv, 11))
mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9;
else if (IS_GEN9_LP(dev_priv))
mask |= DC_STATE_EN_DC9;
@@ -3940,14 +3944,17 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
int requested_dc;
int max_dc;
- if (INTEL_GEN(dev_priv) >= 11) {
- max_dc = 2;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ max_dc = 4;
/*
* DC9 has a separate HW flow from the rest of the DC states,
* not depending on the DMC firmware. It's needed by system
* suspend/resume, so allow it unconditionally.
*/
mask = DC_STATE_EN_DC9;
+ } else if (IS_GEN(dev_priv, 11)) {
+ max_dc = 2;
+ mask = DC_STATE_EN_DC9;
} else if (IS_GEN(dev_priv, 10) || IS_GEN9_BC(dev_priv)) {
max_dc = 2;
mask = 0;
@@ -3966,7 +3973,7 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
requested_dc = enable_dc;
} else if (enable_dc == -1) {
requested_dc = max_dc;
- } else if (enable_dc > max_dc && enable_dc <= 2) {
+ } else if (enable_dc > max_dc && enable_dc <= 4) {
DRM_DEBUG_KMS("Adjusting requested max DC state (%d->%d)\n",
enable_dc, max_dc);
requested_dc = max_dc;
@@ -3975,10 +3982,20 @@ static u32 get_allowed_dc_mask(const struct drm_i915_private *dev_priv,
requested_dc = max_dc;
}
- if (requested_dc > 1)
+ switch (requested_dc) {
+ case 4:
+ mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6;
+ break;
+ case 3:
+ mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC5;
+ break;
+ case 2:
mask |= DC_STATE_EN_UPTO_DC6;
- if (requested_dc > 0)
+ break;
+ case 1:
mask |= DC_STATE_EN_UPTO_DC5;
+ break;
+ }
DRM_DEBUG_KMS("Allowed DC state mask %02x\n", mask);
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 296452f9efe4..4f1806f65040 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -46,7 +46,8 @@ i915_param_named(modeset, int, 0400,
i915_param_named_unsafe(enable_dc, int, 0400,
"Enable power-saving display C-states. "
- "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
+ "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; "
+ "3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)");
i915_param_named_unsafe(enable_fbc, int, 0600,
"Enable frame buffer compression for power savings "
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
