According to the bspec, GLK/CNL have a smaller small joiner RAM buffer
than ICL+. This feels like something that could easily change again on
future platforms, so let's just add a function to return the proper
per-platform buffer size. That may also slightly simplify the upcoming
bigjoiner enabling.
Since we have to change intel_dp_dsc_get_output_bpp()'s signature to
pass the dev_priv down for the platform check, let's take the
opportunity to also make that function static since it isn't used
outside the intel_dp file.
v2: Minor rebase on top of Maarten's changes.
Bspec: 20388
Bspec: 49259
Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Signed-off-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
Reviewed-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dp.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 2b1e71f992b0..f9fc9a1383e3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -68,9 +68,6 @@
#define DP_DPRX_ESI_LEN 14
-/* DP DSC small joiner has 2 FIFOs each of 640 x 6 bytes */
-#define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER 61440
-
/* DP DSC throughput values used for slice count calculations KPixels/s */
#define DP_DSC_PEAK_PIXEL_RATE 2720000
#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000
@@ -498,7 +495,17 @@ u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
DP_DSC_FEC_OVERHEAD_FACTOR);
}
-static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
+static int
+small_joiner_ram_size_bits(struct drm_i915_private *i915)
+{
+ if (INTEL_GEN(i915) >= 11)
+ return 7680 * 8;
+ else
+ return 6144 * 8;
+}
+
+static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
+ u32 link_clock, u32 lane_count,
u32 mode_clock, u32 mode_hdisplay)
{
u32 bits_per_pixel, max_bpp_small_joiner_ram;
@@ -515,7 +522,8 @@ static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
DRM_DEBUG_KMS("Max link bpp: %u\n", bits_per_pixel);
/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
- max_bpp_small_joiner_ram = DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay;
+ max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
+ mode_hdisplay;
DRM_DEBUG_KMS("Max small joiner bpp: %u\n", max_bpp_small_joiner_ram);
/*
@@ -632,7 +640,8 @@ intel_dp_mode_valid(struct drm_connector *connector,
true);
} else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
dsc_max_output_bpp =
- intel_dp_dsc_get_output_bpp(max_link_clock,
+ intel_dp_dsc_get_output_bpp(dev_priv,
+ max_link_clock,
max_lanes,
target_clock,
mode->hdisplay) >> 4;
@@ -2059,7 +2068,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
u8 dsc_dp_slice_count;
dsc_max_output_bpp =
- intel_dp_dsc_get_output_bpp(pipe_config->port_clock,
+ intel_dp_dsc_get_output_bpp(dev_priv,
+ pipe_config->port_clock,
pipe_config->lane_count,
adjusted_mode->crtc_clock,
adjusted_mode->crtc_hdisplay);
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
