Re: [PATCH 4/4] drm/i915: Remove begin/finish_crtc_commit, v2.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 25, 2019 at 04:59:01PM +0200, Maarten Lankhorst wrote:
> This can all be done from the intel_update_crtc function. Split out the
> pipe update into a separate function, just like is done for the planes.
> Pull in all the changes done during fastset as well. It makes no sense
> for it to still exist as a separate function.
> 
> Changes since v1:
> - Inline intel_update_pipe_config()
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 197 ++++++++-----------
>  1 file changed, 86 insertions(+), 111 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index b77574cda648..5a9d06af9f29 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -136,8 +136,6 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
>  			    const struct intel_crtc_state *pipe_config);
>  static void chv_prepare_pll(struct intel_crtc *crtc,
>  			    const struct intel_crtc_state *pipe_config);
> -static void intel_begin_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
> -static void intel_finish_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
>  static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>  				    struct intel_crtc_state *crtc_state);
>  static void skylake_pfit_enable(const struct intel_crtc_state *crtc_state);
> @@ -4409,45 +4407,6 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
>  	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
>  }
>  
> -static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
> -				     const struct intel_crtc_state *new_crtc_state)
> -{
> -	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
> -	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -
> -	/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
> -	crtc->base.mode = new_crtc_state->uapi.mode;
> -
> -	/*
> -	 * Update pipe size and adjust fitter if needed: the reason for this is
> -	 * that in compute_mode_changes we check the native mode (not the pfit
> -	 * mode) to see if we can flip rather than do a full mode set. In the
> -	 * fastboot case, we'll flip, but if we don't update the pipesrc and
> -	 * pfit state, we'll end up with a big fb scanned out into the wrong
> -	 * sized surface.
> -	 */
> -
> -	I915_WRITE(PIPESRC(crtc->pipe),
> -		   ((new_crtc_state->pipe_src_w - 1) << 16) |
> -		   (new_crtc_state->pipe_src_h - 1));
> -
> -	/* on skylake this is done by detaching scalers */
> -	if (INTEL_GEN(dev_priv) >= 9) {
> -		skl_detach_scalers(new_crtc_state);
> -
> -		if (new_crtc_state->pch_pfit.enabled)
> -			skylake_pfit_enable(new_crtc_state);
> -	} else if (HAS_PCH_SPLIT(dev_priv)) {
> -		if (new_crtc_state->pch_pfit.enabled)
> -			ironlake_pfit_enable(new_crtc_state);
> -		else if (old_crtc_state->pch_pfit.enabled)
> -			ironlake_pfit_disable(old_crtc_state);
> -	}
> -
> -	if (INTEL_GEN(dev_priv) >= 11)
> -		icl_set_pipe_chicken(crtc);
> -}
> -
>  static void intel_fdi_normal_train(struct intel_crtc *crtc)
>  {
>  	struct drm_device *dev = crtc->base.dev;
> @@ -13739,13 +13698,88 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
>  	return crtc->base.funcs->get_vblank_counter(&crtc->base);
>  }
>  
> +void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
> +				  struct intel_crtc_state *crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +
> +	if (!IS_GEN(dev_priv, 2))
> +		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
> +
> +	if (crtc_state->has_pch_encoder) {
> +		enum pipe pch_transcoder =
> +			intel_crtc_pch_transcoder(crtc);
> +
> +		intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
> +	}
> +}
> +
> +static void commit_pipe_config(struct intel_atomic_state *state,
> +			       struct intel_crtc_state *old_crtc_state,
> +			       struct intel_crtc_state *new_crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +	bool modeset = needs_modeset(new_crtc_state);
> +
> +	if (!modeset) {
> +		if (new_crtc_state->uapi.color_mgmt_changed ||
> +		    new_crtc_state->update_pipe)
> +			intel_color_commit(new_crtc_state);
> +
> +		if (INTEL_GEN(dev_priv) >= 9)
> +			skl_detach_scalers(new_crtc_state);
> +
> +		if (new_crtc_state->update_pipe) {
> +			/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
> +			crtc->base.mode = new_crtc_state->uapi.mode;
> +
> +			/*
> +			 * Update pipe size and adjust fitter if needed: the reason for this is
> +			 * that in compute_mode_changes we check the native mode (not the pfit
> +			 * mode) to see if we can flip rather than do a full mode set. In the
> +			 * fastboot case, we'll flip, but if we don't update the pipesrc and
> +			 * pfit state, we'll end up with a big fb scanned out into the wrong
> +			 * sized surface.
> +			 */
> +
> +			I915_WRITE(PIPESRC(crtc->pipe),
> +				  ((new_crtc_state->pipe_src_w - 1) << 16) |
> +				  (new_crtc_state->pipe_src_h - 1));
> +
> +			if (INTEL_GEN(dev_priv) >= 9) {
> +				/*
> +				 * enable pipe scaler here if needed, if
> +				 * it's disabled, that's done by
> +				 * skl_detach_scalers() above.
> +				 */
> +				skylake_pfit_enable(new_crtc_state);
> +			} else if (HAS_PCH_SPLIT(dev_priv)) {
> +				if (!new_crtc_state->pch_pfit.enabled)
> +					ironlake_pfit_disable(old_crtc_state);
> +				else
> +					ironlake_pfit_enable(new_crtc_state);
> +			}
> +
> +			if (INTEL_GEN(dev_priv) >= 11)
> +				icl_set_pipe_chicken(crtc);
> +		}
> +
> +		if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> +			bdw_set_pipemisc(new_crtc_state);
> +	}
> +
> +	if (dev_priv->display.atomic_update_watermarks)
> +		dev_priv->display.atomic_update_watermarks(state,
> +							   new_crtc_state);

Feels like bunch of pointless nesting. We could just do

if (!modeset)
	commit_pipe_thing();
if (wm)
	update_wm();

in the caller, or something.

> +}
> +
>  static void intel_update_crtc(struct intel_crtc *crtc,
>  			      struct intel_atomic_state *state,
>  			      struct intel_crtc_state *old_crtc_state,
>  			      struct intel_crtc_state *new_crtc_state)
>  {
> -	struct drm_device *dev = state->base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
>  	bool modeset = needs_modeset(new_crtc_state);
>  	struct intel_plane_state *new_plane_state =
>  		intel_atomic_get_new_plane_state(state,
> @@ -13769,14 +13803,21 @@ static void intel_update_crtc(struct intel_crtc *crtc,
>  	else if (new_plane_state)
>  		intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
>  
> -	intel_begin_crtc_commit(state, crtc);
> +	/* Perform vblank evasion around commit operation */
> +	intel_pipe_update_start(new_crtc_state);
> +
> +	commit_pipe_config(state, old_crtc_state, new_crtc_state);
>  
>  	if (INTEL_GEN(dev_priv) >= 9)
>  		skl_update_planes_on_crtc(state, crtc);
>  	else
>  		i9xx_update_planes_on_crtc(state, crtc);
>  
> -	intel_finish_crtc_commit(state, crtc);
> +	intel_pipe_update_end(new_crtc_state);
> +
> +	if (new_crtc_state->update_pipe && !modeset &&
> +	    old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
> +		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
>  }
>  
>  static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
> @@ -14573,72 +14614,6 @@ skl_max_scale(const struct intel_crtc_state *crtc_state,
>  	return max_scale;
>  }
>  
> -static void intel_begin_crtc_commit(struct intel_atomic_state *state,
> -				    struct intel_crtc *crtc)
> -{
> -	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -	struct intel_crtc_state *old_crtc_state =
> -		intel_atomic_get_old_crtc_state(state, crtc);
> -	struct intel_crtc_state *new_crtc_state =
> -		intel_atomic_get_new_crtc_state(state, crtc);
> -	bool modeset = needs_modeset(new_crtc_state);
> -
> -	/* Perform vblank evasion around commit operation */
> -	intel_pipe_update_start(new_crtc_state);
> -
> -	if (modeset)
> -		goto out;
> -
> -	if (new_crtc_state->uapi.color_mgmt_changed ||
> -	    new_crtc_state->update_pipe)
> -		intel_color_commit(new_crtc_state);
> -
> -	if (new_crtc_state->update_pipe)
> -		intel_update_pipe_config(old_crtc_state, new_crtc_state);
> -	else if (INTEL_GEN(dev_priv) >= 9)
> -		skl_detach_scalers(new_crtc_state);
> -
> -	if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> -		bdw_set_pipemisc(new_crtc_state);
> -
> -out:
> -	if (dev_priv->display.atomic_update_watermarks)
> -		dev_priv->display.atomic_update_watermarks(state,
> -							   new_crtc_state);
> -}
> -
> -void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
> -				  struct intel_crtc_state *crtc_state)
> -{
> -	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -
> -	if (!IS_GEN(dev_priv, 2))
> -		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
> -
> -	if (crtc_state->has_pch_encoder) {
> -		enum pipe pch_transcoder =
> -			intel_crtc_pch_transcoder(crtc);
> -
> -		intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
> -	}
> -}
> -
> -static void intel_finish_crtc_commit(struct intel_atomic_state *state,
> -				     struct intel_crtc *crtc)
> -{
> -	struct intel_crtc_state *old_crtc_state =
> -		intel_atomic_get_old_crtc_state(state, crtc);
> -	struct intel_crtc_state *new_crtc_state =
> -		intel_atomic_get_new_crtc_state(state, crtc);
> -
> -	intel_pipe_update_end(new_crtc_state);
> -
> -	if (new_crtc_state->update_pipe &&
> -	    !needs_modeset(new_crtc_state) &&
> -	    old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
> -		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
> -}
> -
>  /**
>   * intel_plane_destroy - destroy a plane
>   * @plane: plane to destroy
> -- 
> 2.20.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux