On Wed, Sep 25, 2019 at 12:34:17PM +0200, Maarten Lankhorst wrote:
> Op 25-09-2019 om 12:26 schreef Ville Syrjälä:
> > On Wed, Sep 25, 2019 at 10:21:09AM +0200, Maarten Lankhorst wrote:
> >> There was a integer wraparound when mode_clock became too high,
> >> and we didn't correct for the FEC overhead factor when dividing,
> >> with the calculations breaking at HBR3.
> >>
> >> As a result our calculated bpp was way too high, and the link width
> >> limitation never came into effect.
> >>
> >> Print out the resulting bpp calcululations as a sanity check, just
> >> in case we ever have to debug it later on again.
> >>
> >> We also used the wrong factor for FEC. While bspec mentions 2.4%,
> >> all the calculations use 1/0.972261, and the same ratio should be
> >> applied to data M/N as well, so use it there when FEC is enabled.
> >>
> >> This fixes the FIFO underrun we are seeing with FEC enabled.
> >>
> >> Changes since v2:
> >> - Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
> >> - Fix initial hardware readout for FEC. (Ville)
> >> Changes since v3:
> >> - Remove bogus fec_to_mode_clock. (Ville)
> >> Changes since v4:
> >> - Use the correct register for icl. (Ville)
> >> - Split hw readout to a separate patch.
> >>
> >> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> >> Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
> >> Cc: <stable@xxxxxxxxxxxxxxx> # v5.0+
> >> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> >> ---
> >> drivers/gpu/drm/i915/display/intel_display.c | 12 +-
> >> drivers/gpu/drm/i915/display/intel_display.h | 2 +-
> >> drivers/gpu/drm/i915/display/intel_dp.c | 184 ++++++++++---------
> >> drivers/gpu/drm/i915/display/intel_dp.h | 6 +-
> >> drivers/gpu/drm/i915/display/intel_dp_mst.c | 2 +-
> >> 5 files changed, 107 insertions(+), 99 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> >> index 5ecf54270181..c4c9286be987 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_display.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> >> @@ -7291,7 +7291,7 @@ static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
> >> pipe_config->fdi_lanes = lane;
> >>
> >> intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
> >> - link_bw, &pipe_config->fdi_m_n, false);
> >> + link_bw, &pipe_config->fdi_m_n, false, false);
> >>
> >> ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
> >> if (ret == -EDEADLK)
> >> @@ -7538,11 +7538,15 @@ void
> >> intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
> >> int pixel_clock, int link_clock,
> >> struct intel_link_m_n *m_n,
> >> - bool constant_n)
> >> + bool constant_n, bool fec_enable)
> >> {
> >> - m_n->tu = 64;
> >> + u32 data_clock = bits_per_pixel * pixel_clock;
> >> +
> >> + if (fec_enable)
> >> + data_clock = intel_dp_mode_to_fec_clock(data_clock);
> >>
> >> - compute_m_n(bits_per_pixel * pixel_clock,
> >> + m_n->tu = 64;
> >> + compute_m_n(data_clock,
> >> link_clock * nlanes * 8,
> >> &m_n->gmch_m, &m_n->gmch_n,
> >> constant_n);
> >> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> >> index 5cea6f8e107a..4b9e18e5a263 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_display.h
> >> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> >> @@ -443,7 +443,7 @@ enum phy_fia {
> >> void intel_link_compute_m_n(u16 bpp, int nlanes,
> >> int pixel_clock, int link_clock,
> >> struct intel_link_m_n *m_n,
> >> - bool constant_n);
> >> + bool constant_n, bool fec_enable);
> >> bool is_ccs_modifier(u64 modifier);
> >> void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> >> u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> >> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> >> index 829559f97440..2b1e71f992b0 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> >> @@ -76,8 +76,8 @@
> >> #define DP_DSC_MAX_ENC_THROUGHPUT_0 340000
> >> #define DP_DSC_MAX_ENC_THROUGHPUT_1 400000
> >>
> >> -/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */
> >> -#define DP_DSC_FEC_OVERHEAD_FACTOR 976
> >> +/* DP DSC FEC Overhead factor = 1/(0.972261) */
> >> +#define DP_DSC_FEC_OVERHEAD_FACTOR 972261
> >>
> >> /* Compliance test status bits */
> >> #define INTEL_DP_RESOLUTION_SHIFT_MASK 0
> >> @@ -492,6 +492,97 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
> >> return 0;
> >> }
> >>
> >> +u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
> >> +{
> >> + return div_u64(mul_u32_u32(mode_clock, 1000000U),
> >> + DP_DSC_FEC_OVERHEAD_FACTOR);
> >> +}
> >> +
> >> +static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
> >> + u32 mode_clock, u32 mode_hdisplay)
> >> +{
> >> + u32 bits_per_pixel, max_bpp_small_joiner_ram;
> >> + int i;
> >> +
> >> + /*
> >> + * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)*
> >> + * (LinkSymbolClock)* 8 * (TimeSlotsPerMTP)
> >> + * for SST -> TimeSlotsPerMTP is 1,
> >> + * for MST -> TimeSlotsPerMTP has to be calculated
> >> + */
> >> + bits_per_pixel = (link_clock * lane_count * 8) /
> >> + intel_dp_mode_to_fec_clock(mode_clock);
> > Hmm. Aren't we adding the FEC overhead twice now when DSC is also
> > enabled?
>
> No? This is calculating the maximum bpp that can be used for DSC.
Ah, right. Seems fine then.
Series is
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> "For cases where FEC is enabled, pixel clock is replaced by pixel clock/0.972261 in the above calculations."
>
> This bpp check here is to ensure that data M <= N.
>
> ~Maarten
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
