In the transcoder port sync mode, the slave transcoders mask their vblanks
until master transcoder's vblank so while disabling them, make
sure slaves are disabled first and then the masters.
v4:
* Obtain slave state from master (Maarten)
v3:
* Rebase
v2:
* Use the intel_old_crtc_state_disables() helper
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_display.c | 62 ++++++++++++++++++--
1 file changed, 56 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index af932054b5f4..1b2164bf0384 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14009,8 +14009,42 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
new_crtc_state);
}
+static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
+ struct intel_crtc *crtc,
+ struct intel_crtc_state *old_crtc_state,
+ struct intel_crtc_state *new_crtc_state)
+{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+ struct intel_crtc *slave_crtc = intel_get_slave_crtc(dev_priv,
+ new_crtc_state);
+ struct intel_crtc_state *new_slave_crtc_state =
+ intel_atomic_get_new_crtc_state(state, slave_crtc);
+ struct intel_crtc_state *old_slave_crtc_state =
+ intel_atomic_get_old_crtc_state(state, slave_crtc);
+
+ WARN_ON(!slave_crtc || !new_slave_crtc_state ||
+ !old_slave_crtc_state);
+
+ /* Disable Slave first */
+ intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
+ if (old_slave_crtc_state->base.active)
+ intel_old_crtc_state_disables(state,
+ old_slave_crtc_state,
+ new_slave_crtc_state,
+ slave_crtc);
+
+ /* Disable Master */
+ intel_pre_plane_update(old_crtc_state, new_crtc_state);
+ if (old_crtc_state->base.active)
+ intel_old_crtc_state_disables(state,
+ old_crtc_state,
+ new_crtc_state,
+ crtc);
+}
+
static void intel_commit_modeset_disables(struct intel_atomic_state *state)
{
+ struct drm_i915_private *dev_priv = to_i915(state->base.dev);
struct intel_crtc_state *new_crtc_state, *old_crtc_state;
struct intel_crtc *crtc;
int i;
@@ -14027,13 +14061,29 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
if (!needs_modeset(new_crtc_state))
continue;
- intel_pre_plane_update(old_crtc_state, new_crtc_state);
+ /* In case of Transcoder port Sync master slave CRTCs can be
+ * assigned in any order and we need to make sure that
+ * slave CRTCs are disabled first and then master CRTC since
+ * Slave vblanks are masked till Master Vblanks.
+ */
+ if (is_trans_port_sync_mode(dev_priv, new_crtc_state)) {
+ if (is_trans_port_sync_master(dev_priv,
+ new_crtc_state))
+ intel_trans_port_sync_modeset_disables(state,
+ crtc,
+ old_crtc_state,
+ new_crtc_state);
+ else
+ continue;
+ } else {
+ intel_pre_plane_update(old_crtc_state, new_crtc_state);
- if (old_crtc_state->base.active)
- intel_old_crtc_state_disables(state,
- old_crtc_state,
- new_crtc_state,
- crtc);
+ if (old_crtc_state->base.active)
+ intel_old_crtc_state_disables(state,
+ old_crtc_state,
+ new_crtc_state,
+ crtc);
+ }
}
}
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
