On Wed, Sep 18, 2019 at 5:07 PM José Roberto de Souza
<jose.souza@xxxxxxxxx> wrote:
>
> From: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
>
> These are the registers needed to program Dekel phy. Some register
> definitions will be reused from MG PHY definitions, so adding a
> comment on those.
>
> Bspec: 49295
>
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> Signed-off-by: Clinton A Taylor <clinton.a.taylor@xxxxxxxxx>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
You can turn my s-o-b into
Reviewed-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
(s-o-b was only here since I had sent the previous version)
Lucas De Marchi
> ---
> drivers/gpu/drm/i915/i915_reg.h | 162 ++++++++++++++++++++++++++++++++
> 1 file changed, 162 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index ee5626579263..32f98d0e0e9c 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -10104,6 +10104,168 @@ enum skl_power_gate {
> _TGL_DPLL1_CFGCR1, \
> _TGL_TBTPLL_CFGCR1)
>
> +#define _DKL_PHY1_BASE 0x168000
> +#define _DKL_PHY2_BASE 0x169000
> +#define _DKL_PHY3_BASE 0x16A000
> +#define _DKL_PHY4_BASE 0x16B000
> +#define _DKL_PHY5_BASE 0x16C000
> +#define _DKL_PHY6_BASE 0x16D000
> +
> +/* DEKEL PHY MMIO Address = Phy base + (internal address & ~index_mask) */
> +#define _DKL_PLL_DIV0 0x200
> +#define DKL_PLL_DIV0_INTEG_COEFF(x) ((x) << 16)
> +#define DKL_PLL_DIV0_INTEG_COEFF_MASK (0x1F << 16)
> +#define DKL_PLL_DIV0_PROP_COEFF(x) ((x) << 12)
> +#define DKL_PLL_DIV0_PROP_COEFF_MASK (0xF << 12)
> +#define DKL_PLL_DIV0_FBPREDIV_SHIFT (8)
> +#define DKL_PLL_DIV0_FBPREDIV(x) ((x) << DKL_PLL_DIV0_FBPREDIV_SHIFT)
> +#define DKL_PLL_DIV0_FBPREDIV_MASK (0xF << DKL_PLL_DIV0_FBPREDIV_SHIFT)
> +#define DKL_PLL_DIV0_FBDIV_INT(x) ((x) << 0)
> +#define DKL_PLL_DIV0_FBDIV_INT_MASK (0xFF << 0)
> +#define DKL_PLL_DIV0(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_PLL_DIV0)
> +
> +#define _DKL_PLL_DIV1 0x204
> +#define DKL_PLL_DIV1_IREF_TRIM(x) ((x) << 16)
> +#define DKL_PLL_DIV1_IREF_TRIM_MASK (0x1F << 16)
> +#define DKL_PLL_DIV1_TDC_TARGET_CNT(x) ((x) << 0)
> +#define DKL_PLL_DIV1_TDC_TARGET_CNT_MASK (0xFF << 0)
> +#define DKL_PLL_DIV1(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_PLL_DIV1)
> +
> +#define _DKL_PLL_SSC 0x210
> +#define DKL_PLL_SSC_IREF_NDIV_RATIO(x) ((x) << 29)
> +#define DKL_PLL_SSC_IREF_NDIV_RATIO_MASK (0x7 << 29)
> +#define DKL_PLL_SSC_STEP_LEN(x) ((x) << 16)
> +#define DKL_PLL_SSC_STEP_LEN_MASK (0xFF << 16)
> +#define DKL_PLL_SSC_STEP_NUM(x) ((x) << 11)
> +#define DKL_PLL_SSC_STEP_NUM_MASK (0x7 << 11)
> +#define DKL_PLL_SSC_EN (1 << 9)
> +#define DKL_PLL_SSC(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_PLL_SSC)
> +
> +#define _DKL_PLL_BIAS 0x214
> +#define DKL_PLL_BIAS_FRAC_EN_H (1 << 30)
> +#define DKL_PLL_BIAS_FBDIV_SHIFT (8)
> +#define DKL_PLL_BIAS_FBDIV_FRAC(x) ((x) << DKL_PLL_BIAS_FBDIV_SHIFT)
> +#define DKL_PLL_BIAS_FBDIV_FRAC_MASK (0x3FFFFF << DKL_PLL_BIAS_FBDIV_SHIFT)
> +#define DKL_PLL_BIAS(tc_port) _MMIO(_PORT(tc_port, _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_PLL_BIAS)
> +
> +#define _DKL_PLL_TDC_COLDST_BIAS 0x218
> +#define DKL_PLL_TDC_SSC_STEP_SIZE(x) ((x) << 8)
> +#define DKL_PLL_TDC_SSC_STEP_SIZE_MASK (0xFF << 8)
> +#define DKL_PLL_TDC_FEED_FWD_GAIN(x) ((x) << 0)
> +#define DKL_PLL_TDC_FEED_FWD_GAIN_MASK (0xFF << 0)
> +#define DKL_PLL_TDC_COLDST_BIAS(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_PLL_TDC_COLDST_BIAS)
> +
> +#define _DKL_REFCLKIN_CTL 0x12C
> +/* Bits are the same as MG_REFCLKIN_CTL */
> +#define DKL_REFCLKIN_CTL(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_REFCLKIN_CTL)
> +
> +#define _DKL_CLKTOP2_HSCLKCTL 0xD4
> +/* Bits are the same as MG_CLKTOP2_HSCLKCTL */
> +#define DKL_CLKTOP2_HSCLKCTL(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_CLKTOP2_HSCLKCTL)
> +
> +#define _DKL_CLKTOP2_CORECLKCTL1 0xD8
> +/* Bits are the same as MG_CLKTOP2_CORECLKCTL1 */
> +#define DKL_CLKTOP2_CORECLKCTL1(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_CLKTOP2_CORECLKCTL1)
> +
> +#define _DKL_TX_DPCNTL0 0x2C0
> +#define DKL_TX_PRESHOOT_COEFF(x) ((x) << 13)
> +#define DKL_TX_PRESHOOT_COEFF_MASK (0x1f << 13)
> +#define DKL_TX_DE_EMPHASIS_COEFF(x) ((x) << 8)
> +#define DKL_TX_DE_EMPAHSIS_COEFF_MASK (0x1f << 8)
> +#define DKL_TX_VSWING_CONTROL(x) ((x) << 0)
> +#define DKL_TX_VSWING_CONTROL_MASK (0x7 << 0)
> +#define DKL_TX_DPCNTL0(tc_port) _MMIO(_PORT, that is unchange(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_DPCNTL0)
> +
> +#define _DKL_TX_DPCNTL1 0x2C4
> +/* Bits are the same as DKL_TX_DPCNTRL0 */
> +#define DKL_TX_DPCNTL1(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_DPCNTL1)
> +
> +#define _DKL_TX_DPCNTL2 0x2C8
> +#define DKL_TX_DP20BITMODE (1 << 2)
> +#define DKL_TX_DPCNTL2(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_DPCNTL2)
> +
> +#define _DKL_TX_FW_CALIB 0x2F8
> +#define DKL_TX_CFG_DISABLE_WAIT_INIT (1 << 7)
> +#define DKL_TX_FW_CALIB(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_FW_CALIB)
> +
> +#define _DKL_TX_DW17 0xDC4
> +#define DKL_TX_DW17(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_DW17)
> +
> +#define _DKL_TX_DW18 0xDC8
> +#define DKL_TX_DW18(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_TX_DW18)
> +
> +#define _DKL_DP_MODE 0xA0
> +#define DKL_DP_MODE_CFG_GAONPWR_GATING (1 << 1)
> +#define DKL_DP_MODE_CFG_DIGPWR_GATING (1 << 2)
> +#define DKL_DP_MODE_CFG_CLNPWR_GATING (1 << 3)
> +#define DKL_DP_MODE_CFG_TRPWR_GATING (1 << 4)
> +#define DKL_DP_MODE_CFG_TR2PWR_GATING (1 << 5)
> +#define DKL_DP_MODE_CFG_GATING_CTRL_MASK (0x1f << 1)
> +#define DKL_DP_MODE_CFG_DP_X1_MODE (1 << 6)
> +#define DKL_DP_MODE_CFG_DP_X2_MODE (1 << 7)
> +#define DKL_DP_MODE(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_DP_MODE)
> +
> +#define _DKL_CMN_UC_DW27 0x36C
> +#define DKL_CMN_UC_DW27_UC_HEALTH (0x1 << 15)
> +#define DKL_CMN_UC_DW_27(tc_port) _MMIO(_PORT(tc_port, \
> + _DKL_PHY1_BASE, \
> + _DKL_PHY2_BASE) + \
> + _DKL_CMN_UC_DW27)
> +
> +/*
> + * Each Dekel PHY is addressed through a 4KB aperture. Each PHY has more than
> + * 4KB of register space, so a separate index is programmed in HIP_INDEX_REG0
> + * or HIP_INDEX_REG1, based on the port number, to set the upper 2 address
> + * bits that point the 4KB window into the full PHY register space.
> + */
> +#define _HIP_INDEX_REG0 0x1010A0
> +#define _HIP_INDEX_REG1 0x1010A4
> +#define HIP_INDEX_REG(tc_port) _MMIO((tc_port) < 4 ? _HIP_INDEX_REG0 \
> + : _HIP_INDEX_REG1)
> +#define _HIP_INDEX_SHIFT(tc_port) (8 * ((tc_port) % 4))
> +#define HIP_INDEX_VAL(tc_port, val) ((val) << _HIP_INDEX_SHIFT(tc_port))
> +
> /* BXT display engine PLL */
> #define BXT_DE_PLL_CTL _MMIO(0x6d000)
> #define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
> --
> 2.23.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Lucas De Marchi
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
