As the SDVO/HDMI registers are multiplex, it is safe to assume that the w/a required for HDMI on IbexPoint, namely that the SDVO register cannot both be disabled and have selected transcoder B, is also required for SDVO. At least the modeset state checker detects that the transcoder selection is left in the undefined state, and so it appears sensible to apply the w/a: [ 1814.480052] WARNING: at drivers/gpu/drm/i915/intel_display.c:1487 assert_pch_hdmi_disabled+0xad/0xb5() [ 1814.480053] Hardware name: Libretto W100 [ 1814.480054] IBX PCH hdmi port still using transcoder B Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57066 Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk> --- drivers/gpu/drm/i915/intel_sdvo.c | 38 ++++++++++++++++++++++++++++++++++++- 1 file changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 92baac2..b302ef4 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1228,6 +1228,30 @@ static void intel_disable_sdvo(struct intel_encoder *encoder) temp = I915_READ(intel_sdvo->sdvo_reg); if ((temp & SDVO_ENABLE) != 0) { + /* HW workaround for IBX, we need to move the port to + * transcoder A before disabling it. */ + if (HAS_PCH_IBX(encoder->base.dev)) { + struct drm_crtc *crtc = encoder->base.crtc; + int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; + + if (temp & SDVO_PIPE_B_SELECT) { + temp &= ~SDVO_PIPE_B_SELECT; + I915_WRITE(intel_sdvo->sdvo_reg, temp); + POSTING_READ(intel_sdvo->sdvo_reg); + + /* Again we need to write this twice. */ + I915_WRITE(intel_sdvo->sdvo_reg, temp); + POSTING_READ(intel_sdvo->sdvo_reg); + + /* Transcoder selection bits only update + * effectively on vblank. */ + if (crtc) + intel_wait_for_vblank(encoder->base.dev, pipe); + else + msleep(50); + } + } + intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE); } } @@ -1244,8 +1268,20 @@ static void intel_enable_sdvo(struct intel_encoder *encoder) u8 status; temp = I915_READ(intel_sdvo->sdvo_reg); - if ((temp & SDVO_ENABLE) == 0) + if ((temp & SDVO_ENABLE) == 0) { + /* HW workaround for IBX, we need to move the port + * to transcoder A before disabling it. */ + if (HAS_PCH_IBX(dev)) { + struct drm_crtc *crtc = encoder->base.crtc; + int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1; + + /* Restore the transcoder select bit. */ + if (pipe == PIPE_B) + temp |= SDVO_PIPE_B_SELECT; + } + intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE); + } for (i = 0; i < 2; i++) intel_wait_for_vblank(dev, intel_crtc->pipe); -- 1.7.10.4
