Re: [PATCH 1/6] drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 09-09-2019 om 05:43 schreef Manasi Navare:
> In case of tiled displays when the two tiles are sent across two CRTCs
> over two separate DP SST connectors, we need a mechanism to synchronize
> the two CRTCs and their corresponding transcoders.
> So use the master-slave mode where there is one master corresponding
> to last horizontal and vertical tile that needs to be genlocked with
> all other slave tiles.
> This patch identifies saves the master transcoder in all the slave
> CRTC states. This is needed to select the master CRTC/transcoder
> while configuring transcoder port sync for the corresponding slaves.
>
> v3:
> * Use master_tramscoder instead of master_crtc for valid
> HW state readouts (Ville)
> v2:
> * Move this to intel_mode_set_pipe_config(Jani N, Ville)
> * Use slave_bitmask to save associated slaves in master crtc state (Ville)
>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c  | 105 ++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_display.h  |   1 +
>  .../drm/i915/display/intel_display_types.h    |   6 +
>  3 files changed, 112 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4c30672bd108..8942c905ae66 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -11745,6 +11745,91 @@ static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
>  	return !old_crtc_state->c8_planes != !new_crtc_state->c8_planes;
>  }
>  
> +static int icl_add_sync_mode_crtcs(struct drm_crtc *crtc,
> +				   struct intel_crtc_state *crtc_state,
> +				   struct drm_atomic_state *state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
> +	struct drm_connector *master_connector, *connector;
> +	struct drm_connector_state *connector_state;
> +	struct drm_connector_list_iter conn_iter;
> +	struct drm_crtc *master_crtc = NULL;
> +	struct drm_crtc_state *master_crtc_state;
> +	struct intel_crtc_state *master_pipe_config;
> +	int i, tile_group_id;
> +
> +	if (INTEL_GEN(dev_priv) < 11)
> +		return 0;
> +
> +	/*
> +	 * In case of tiled displays there could be one or more slaves but there is
> +	 * only one master. Lets make the CRTC used by the connector corresponding
> +	 * to the last horizonal and last vertical tile a master/genlock CRTC.
> +	 * All the other CRTCs corresponding to other tiles of the same Tile group
> +	 * are the slave CRTCs and hold a pointer to their genlock CRTC.
> +	 */
> +	for_each_new_connector_in_state(state, connector, connector_state, i) {
> +		if (connector_state->crtc != crtc)
> +			continue;
> +		if (!connector->has_tile)
> +			continue;
> +		if (crtc_state->base.mode.hdisplay != connector->tile_h_size ||
> +		    crtc_state->base.mode.vdisplay != connector->tile_v_size)
> +			return 0;
> +		if (connector->tile_h_loc == connector->num_h_tile - 1 &&
> +		    connector->tile_v_loc == connector->num_v_tile - 1)
> +			continue;
> +		crtc_state->sync_mode_slaves_mask = 0;
> +		tile_group_id = connector->tile_group->id;
> +		drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> +		drm_for_each_connector_iter(master_connector, &conn_iter) {
> +			struct drm_connector_state *master_conn_state = NULL;
> +
> +			if (!master_connector->has_tile)
> +				continue;
> +			if (master_connector->tile_h_loc != master_connector->num_h_tile - 1 ||
> +			    master_connector->tile_v_loc != master_connector->num_v_tile - 1)
> +				continue;
> +			if (master_connector->tile_group->id != tile_group_id)
> +				continue;
> +
> +			master_conn_state = drm_atomic_get_connector_state(state,
> +									   master_connector);
> +			if (IS_ERR(master_conn_state)) {
> +				drm_connector_list_iter_end(&conn_iter);
> +				return PTR_ERR(master_conn_state);
> +			}
> +			if (master_conn_state->crtc) {
> +				master_crtc = master_conn_state->crtc;
> +				break;
> +			}
> +		}
> +		drm_connector_list_iter_end(&conn_iter);
> +
> +		if (!master_crtc) {
> +			DRM_DEBUG_KMS("Could not find Master CRTC for Slave CRTC %d\n",
> +				      connector_state->crtc->base.id);
> +			return -EINVAL;
> +		}
> +
> +		master_crtc_state = drm_atomic_get_crtc_state(state,
> +							      master_crtc);
> +		if (IS_ERR(master_crtc_state))
> +			return PTR_ERR(master_crtc_state);
> +
> +		master_pipe_config = to_intel_crtc_state(master_crtc_state);
> +		crtc_state->master_transcoder = master_pipe_config->cpu_transcoder;
> +		master_pipe_config->sync_mode_slaves_mask |=
> +			BIT(crtc_state->cpu_transcoder);
> +		DRM_DEBUG_KMS("Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
> +			      transcoder_name(crtc_state->master_transcoder),
> +			      crtc_state->base.crtc->base.id,
> +			      master_pipe_config->sync_mode_slaves_mask);
> +	}
Ugh, no better way than a double loop? :( Probably not. Looks good.
> +
> +	return 0;
> +}
> +
>  static int intel_crtc_atomic_check(struct drm_crtc *crtc,
>  				   struct drm_crtc_state *crtc_state)
>  {
> @@ -12250,6 +12335,12 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
>  	if (IS_G4X(dev_priv) ||
>  	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
>  		saved_state->wm = crtc_state->wm;
> +	/* Save the slave bitmask which gets filled for master crtc state during
> +	 * slave atomic check call.
> +	 */
> +	if (is_trans_port_sync_master(dev_priv, crtc_state))
> +		saved_state->sync_mode_slaves_mask =
> +			crtc_state->sync_mode_slaves_mask;
>  
>  	/* Keep base drm_crtc_state intact, only clear our extended struct */
>  	BUILD_BUG_ON(offsetof(struct intel_crtc_state, base));
> @@ -12343,6 +12434,15 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
>  	drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
>  			      CRTC_STEREO_DOUBLE);
>  
> +	/* Set the crtc_state defaults for trans_port_sync */
> +	pipe_config->master_transcoder = INVALID_TRANSCODER;
> +	ret = icl_add_sync_mode_crtcs(crtc, pipe_config, state);
> +	if (ret) {
> +		DRM_DEBUG_KMS("Cannot assign Sync Mode CRTCs: %d\n",
> +			      ret);
> +		return ret;
> +	}
> +
>  	/* Pass our mode to the connectors and the CRTC to give them a chance to
>  	 * adjust it according to limitations or connector properties, and also
>  	 * a chance to reject the mode entirely.
> @@ -12856,6 +12956,11 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,
>  	PIPE_CONF_CHECK_INFOFRAME(hdmi);
>  	PIPE_CONF_CHECK_INFOFRAME(drm);
>  
> +	if (INTEL_GEN(dev_priv) >= 11) {
> +		PIPE_CONF_CHECK_I(sync_mode_slaves_mask);
> +		PIPE_CONF_CHECK_I(master_transcoder);
> +	}
> +
>  #undef PIPE_CONF_CHECK_X
>  #undef PIPE_CONF_CHECK_I
>  #undef PIPE_CONF_CHECK_BOOL
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 33fd523c4622..c1011204b407 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -91,6 +91,7 @@ enum pipe {
>  #define pipe_name(p) ((p) + 'A')
>  
>  enum transcoder {
> +	INVALID_TRANSCODER = -1,
>  	/*
>  	 * The following transcoders have a 1:1 transcoder -> pipe mapping,
>  	 * keep their values fixed: the code assumes that TRANSCODER_A=0, the
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index d5cc4b810d9e..17ff34ca298b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -991,6 +991,12 @@ struct intel_crtc_state {
>  
>  	/* Forward Error correction State */
>  	bool fec_enable;
> +
> +	/* Pointer to master transcoder in case of tiled displays */
> +	enum transcoder master_transcoder;
> +
> +	/* Bitmask to indicate slaves attached */
> +	u8 sync_mode_slaves_mask;
>  };
>  
>  struct intel_crtc {


_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux