Added key register definitions of DSB. dsb-ctrl register is required to enable dsb-engine. head-ptr register hold the head of buffer address from where the execution will start. Programming tail-ptr register is a trigger point to start execution. Cc: Uma Shankar <uma.shankar@xxxxxxxxx> Cc: Jani Nikula <jani.nikula@xxxxxxxxx> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> Signed-off-by: Animesh Manna <animesh.manna@xxxxxxxxx> --- drivers/gpu/drm/i915/i915_reg.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 02e1ef10c47e..71c6c2380443 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -11564,4 +11564,19 @@ enum skl_power_gate { #define PORT_TX_DFLEXDPCSSS(fia) _MMIO_FIA((fia), 0x00894) #define DP_PHY_MODE_STATUS_NOT_SAFE(tc_port) (1 << (tc_port)) +/* This register controls the Display State Buffer (DSB) engines. */ +#define _DSBSL_INSTANCE_BASE 0x70B00 +#define DSBSL_INSTANCE(pipe, id) (_DSBSL_INSTANCE_BASE + \ + (pipe) * 0x1000 + (id) * 100) +#define DSB_HEAD(pipe, id) _MMIO(DSBSL_INSTANCE(pipe, id) + 0x0) +#define DSB_TAIL(pipe, id) _MMIO(DSBSL_INSTANCE(pipe, id) + 0x4) +#define DSB_CTRL(pipe, id) _MMIO(DSBSL_INSTANCE(pipe, id) + 0x8) +#define DSB_ENABLE (1 << 31) +#define DSB_BUFFER_REITERATE (1 << 29) +#define DSB_WAIT_FOR_VBLANK (1 << 28) +#define DSB_WAIT_FOR_LINE_IN_RANGE (1 << 27) +#define DSB_HALT (1 << 16) +#define DSB_NON_POSTED_ENABLE (1 << 8) +#define DSB_STATUS (1 << 0) + #endif /* _I915_REG_H_ */ -- 2.22.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx