>-----Original Message----- >From: Lucas De Marchi [mailto:lucas.de.marchi@xxxxxxxxx] >Sent: Friday, August 16, 2019 8:44 PM >To: Shankar, Uma <uma.shankar@xxxxxxxxx> >Cc: De Marchi, Lucas <lucas.demarchi@xxxxxxxxx>; intel-gfx@xxxxxxxxxxxxxxxxxxxxx >Subject: Re: [PATCH] drm/i915/tgl: disable DDIC > >On Fri, Aug 16, 2019 at 3:14 AM Shankar, Uma <uma.shankar@xxxxxxxxx> wrote: >> >> >> >> >-----Original Message----- >> >From: Intel-gfx [mailto:intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx] On >> >Behalf Of Lucas De Marchi >> >Sent: Thursday, August 15, 2019 5:25 AM >> >To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx >> >Subject: [PATCH] drm/i915/tgl: disable DDIC >> > >> >The current SKUs added for Tiger Lake don't have DDIC hooked up, even >> >though it is supported by the SoC. The current state for these SKUs >> >is problematic since while enabling the combo phy, PORT_COMP_DW* >> >return 0xFFFFFFFF, which is invalid per register definition. >> > >> >During initialization we check what phys are not yet enabled by >> >reading PHY_MISC_C and try to enable it by toggling the "DE to IO Comp Pwr >Down" >> >bit. But after that any read to the PORT_COMP_DW* returns invalid >> >results. This removes the following warning >> > >> >[56997.634353] Missing case (val == 4294967295) [56997.639241] >> >WARNING: CPU: 5 >> >PID: 768 at drivers/gpu/drm/i915/display/intel_combo_phy.c:54 >> >cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Modules linked in: >> >i915(+) prime_numbers x86_pkg_temp_thermal coretemp kvm_intel kvm >> >irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel e1000e [last >unloaded: >> >prime_numbers] >> >[56997.639808] CPU: 5 PID: 768 Comm: insmod Tainted: G U W 5.2.0- >> >demarchi+ #65 >> >[56997.639808] Hardware name: Intel Corporation Tiger Lake Client >> >Platform/TigerLake U DDR4 SODIMM RVP, BIOS >> >TGLSFWI1.R00.2252.A03.1906270154 06/27/2019 [56997.639808] RIP: >> >0010:cnl_get_procmon_ref_values+0xc9/0xf0 [i915] [56997.639808] Code: >> >2c a0 85 >> >c9 74 e0 81 f9 00 00 00 01 75 09 48 c7 c0 0c a4 2c a0 eb cf 48 c7 c6 >> >3c 3a 31 a0 48 c7 >> >c7 40 3a 31 a0 e8 6b 4d ea e0 <0f> 0b 48 c7 c0 00 a4 2c a0 eb b1 48 >> >c7 c0 24 a4 2 c a0 eb a8 e8 be [56997.639808] RSP: >> >0018:ffffc9000068f8a8 EFLAGS: 00010286 [56997.639808] RAX: >0000000000000000 RBX: ffff88848fa90000 RCX: >> >0000000000000000 [56997.639808] RDX: ffff8884a08b5ef8 RSI: >> >ffff8884a08a6658 >> >RDI: 00000000ffffffff [56997.639808] RBP: 0000000000000002 R08: >> >0000000000000000 R09: 0000000000000000 [56997.639808] R10: >> >0000000000000000 R11: 0000000000000000 R12: ffff88848fa90000 >> >[56997.639808] >> >R13: 0000000000000000 R14: 0000000000000002 R15: 0006c00000162000 >> >[56997.639808] FS: 00007f61ca3d12c0(0000) GS:ffff8884a0880000(0000) >> >knlGS:0000000000000000 [56997.639808] CS: 0010 DS: 0000 ES: 0000 CR0: >> >0000000080050033 [56997.639808] CR2: 00007f71be6a92c0 CR3: >> >0000000494750006 CR4: 0000000000760ee0 [56997.639808] PKRU: 55555554 >> >[56997.639808] Call Trace: >> >[56997.639808] cnl_verify_procmon_ref_values+0x36/0xf0 [i915] [56997.639808] >? >> >rcu_read_lock_sched_held+0x6f/0x80 >> >[56997.639808] ? gen11_fwtable_read32+0x257/0x290 [i915] >> >[56997.639808] >> >icl_combo_phy_verify_state.part.0+0x22/0xa0 [i915] [56997.639808] >> >intel_combo_phy_init+0x17e/0x3e0 [i915] [56997.639808] ? >> >icl_display_core_init+0x2c/0x1a0 [i915] [56997.639808] ? >> >_raw_spin_unlock_irqrestore+0x4c/0x60 >> >[56997.639808] icl_display_core_init+0x34/0x1a0 [i915] >> >[56997.639808] >> >intel_power_domains_init_hw+0x200/0x570 [i915] [56997.639808] >> >i915_driver_probe+0x103b/0x17e0 [i915] [56997.639808] ? >> >printk+0x53/0x6a [56997.639808] i915_pci_probe+0x3b/0x190 [i915] >> > >> >We may or may not need to change the implementation to account for >> >DDIC being available on other SKUs. For now I think the best thing to do is to just >disable the port. >> >> This information ideally should be coming from VBT and based on that >> driver can take a call whether to enable the port or not. So is this >> an interim solution and later would be dropped, since there will/may be SKU's with >PORT C enabled. >> >> I feel revocation of this port in VBT should be the right approach, instead of an >interim solution. > >Ideally yes, but it's better something that works than the ideal solution that doesn't. I >wanted to go the VBT route, but it wouldn't work with any machine that I have >available. >Hence this patch. > >When/if there's one sku with ddic, hopefully VBT will already be fixed or we may go >the route of differentiating by PCI id. I feel this is a mistake in VBT which exposes an non-existent port and should be fixed. I don't think adding PCIID based checks for a platform is a good idea. We should call init for all ports spec claims to be supporting and based on VBT configuration just return if port is not available for use on that particular design. Now with current approach, if on a new SKU this is fixed (PORT C gets working) and VBT exposes it also correctly, we will not even attempt to initialize it until we fix this patch and re-send a somewhat similar to a revert version of this patch. So my take would be that we should push VBT guys to fix the problem instead of adding a temporary WA in our driver. I will leave to maintainers to suggest what is the optimum approach. Regards, Uma Shankar >Lucas De Marchi > >> >> Regards, >> Uma Shankar >> >> >Cc: José Roberto de Souza <jose.souza@xxxxxxxxx> >> >Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx> >> >--- >> > drivers/gpu/drm/i915/display/intel_display.c | 3 +-- >> > 1 file changed, 1 insertion(+), 2 deletions(-) >> > >> >diff --git a/drivers/gpu/drm/i915/display/intel_display.c >> >b/drivers/gpu/drm/i915/display/intel_display.c >> >index 5b733e38eae3..6c6a5a5f41bb 100644 >> >--- a/drivers/gpu/drm/i915/display/intel_display.c >> >+++ b/drivers/gpu/drm/i915/display/intel_display.c >> >@@ -6683,7 +6683,7 @@ bool intel_phy_is_combo(struct drm_i915_private >> >*dev_priv, enum phy phy) >> > if (phy == PHY_NONE) >> > return false; >> > >> >- if (IS_ELKHARTLAKE(dev_priv) || INTEL_GEN(dev_priv) >= 12) >> >+ if (IS_ELKHARTLAKE(dev_priv)) >> > return phy <= PHY_C; >> > >> > if (INTEL_GEN(dev_priv) >= 11) @@ -15317,7 +15317,6 @@ static >> >void intel_setup_outputs(struct drm_i915_private >> >*dev_priv) >> > /* TODO: initialize TC ports as well */ >> > intel_ddi_init(dev_priv, PORT_A); >> > intel_ddi_init(dev_priv, PORT_B); >> >- intel_ddi_init(dev_priv, PORT_C); >> > icl_dsi_init(dev_priv); >> > } else if (IS_ELKHARTLAKE(dev_priv)) { >> > intel_ddi_init(dev_priv, PORT_A); >> >-- >> >2.21.0 >> > >> >_______________________________________________ >> >Intel-gfx mailing list >> >Intel-gfx@xxxxxxxxxxxxxxxxxxxxx >> >https://lists.freedesktop.org/mailman/listinfo/intel-gfx >> _______________________________________________ >> Intel-gfx mailing list >> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx > > > >-- >Lucas De Marchi _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
