On Fri, 2019-07-12 at 18:09 -0700, Lucas De Marchi wrote:
> The final save operation into pll_state of the calculations done will
> be different for DKL PHY. Prepare for that by reindenting code so
> it's
> easier to check for correctness. This one has no change in behavior.
>
Reviewed-by: Matt Atwood <matthew.s.atwood@xxxxxxxxx>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 119 ++++++++++----
> ----
> 1 file changed, 66 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 319a26a1ec10..7312a47f79ad 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -2804,60 +2804,73 @@ static bool icl_calc_mg_pll_state(struct
> intel_crtc_state *crtc_state,
> }
> ssc_steplog = 4;
>
> - pll_state->mg_pll_div0 = (m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H
> : 0) |
> - MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) |
> - MG_PLL_DIV0_FBDIV_INT(m2div_int);
> -
> - pll_state->mg_pll_div1 = MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv)
> |
> - MG_PLL_DIV1_DITHER_DIV_2 |
> - MG_PLL_DIV1_NDIVRATIO(1) |
> - MG_PLL_DIV1_FBPREDIV(m1div);
> -
> - pll_state->mg_pll_lf = MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) |
> - MG_PLL_LF_AFCCNTSEL_512 |
> - MG_PLL_LF_GAINCTRL(1) |
> - MG_PLL_LF_INT_COEFF(int_coeff) |
> - MG_PLL_LF_PROP_COEFF(prop_coeff);
> -
> - pll_state->mg_pll_frac_lock = MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32
> |
> - MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_3
> 2 |
> - MG_PLL_FRAC_LOCK_LOCKTHRESH(10) |
> - MG_PLL_FRAC_LOCK_DCODITHEREN |
> - MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(fee
> dfwgain);
> - if (use_ssc || m2div_rem > 0)
> - pll_state->mg_pll_frac_lock |=
> MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN;
> -
> - pll_state->mg_pll_ssc = (use_ssc ? MG_PLL_SSC_EN : 0) |
> - MG_PLL_SSC_TYPE(2) |
> - MG_PLL_SSC_STEPLENGTH(ssc_steplen) |
> - MG_PLL_SSC_STEPNUM(ssc_steplog) |
> - MG_PLL_SSC_FLLEN |
> - MG_PLL_SSC_STEPSIZE(ssc_stepsize);
> -
> - pll_state->mg_pll_tdc_coldst_bias = MG_PLL_TDC_COLDST_COLDSTART
> |
> - MG_PLL_TDC_COLDST_IREFINT_E
> N |
> - MG_PLL_TDC_COLDST_REFBIAS_S
> TART_PULSE_W(iref_pulse_w) |
> - MG_PLL_TDC_TDCOVCCORR_EN |
> - MG_PLL_TDC_TDCSEL(3);
> -
> - pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) |
> - MG_PLL_BIAS_INIT_DCOAMP(0x3F) |
> - MG_PLL_BIAS_BIAS_BONUS(10) |
> - MG_PLL_BIAS_BIASCAL_EN |
> - MG_PLL_BIAS_CTRIM(12) |
> - MG_PLL_BIAS_VREF_RDAC(4) |
> - MG_PLL_BIAS_IREFTRIM(iref_trim);
> -
> - if (refclk_khz == 38400) {
> - pll_state->mg_pll_tdc_coldst_bias_mask =
> MG_PLL_TDC_COLDST_COLDSTART;
> - pll_state->mg_pll_bias_mask = 0;
> - } else {
> - pll_state->mg_pll_tdc_coldst_bias_mask = -1U;
> - pll_state->mg_pll_bias_mask = -1U;
> - }
> + /* write pll_state calculations */
> + {
> + pll_state->mg_pll_div0 =
> + (m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) |
> + MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) |
> + MG_PLL_DIV0_FBDIV_INT(m2div_int);
> +
> + pll_state->mg_pll_div1 =
> + MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv) |
> + MG_PLL_DIV1_DITHER_DIV_2 |
> + MG_PLL_DIV1_NDIVRATIO(1) |
> + MG_PLL_DIV1_FBPREDIV(m1div);
> +
> + pll_state->mg_pll_lf =
> + MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) |
> + MG_PLL_LF_AFCCNTSEL_512 |
> + MG_PLL_LF_GAINCTRL(1) |
> + MG_PLL_LF_INT_COEFF(int_coeff) |
> + MG_PLL_LF_PROP_COEFF(prop_coeff);
> +
> + pll_state->mg_pll_frac_lock =
> + MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 |
> + MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 |
> + MG_PLL_FRAC_LOCK_LOCKTHRESH(10) |
> + MG_PLL_FRAC_LOCK_DCODITHEREN |
> + MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(feedfwgain);
> + if (use_ssc || m2div_rem > 0)
> + pll_state->mg_pll_frac_lock |=
> + MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN;
> +
> + pll_state->mg_pll_ssc =
> + (use_ssc ? MG_PLL_SSC_EN : 0) |
> + MG_PLL_SSC_TYPE(2) |
> + MG_PLL_SSC_STEPLENGTH(ssc_steplen) |
> + MG_PLL_SSC_STEPNUM(ssc_steplog) |
> + MG_PLL_SSC_FLLEN |
> + MG_PLL_SSC_STEPSIZE(ssc_stepsize);
> +
> + pll_state->mg_pll_tdc_coldst_bias =
> + MG_PLL_TDC_COLDST_COLDSTART |
> + MG_PLL_TDC_COLDST_IREFINT_EN |
> + MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pu
> lse_w) |
> + MG_PLL_TDC_TDCOVCCORR_EN |
> + MG_PLL_TDC_TDCSEL(3);
> +
> + pll_state->mg_pll_bias =
> + MG_PLL_BIAS_BIAS_GB_SEL(3) |
> + MG_PLL_BIAS_INIT_DCOAMP(0x3F) |
> + MG_PLL_BIAS_BIAS_BONUS(10) |
> + MG_PLL_BIAS_BIASCAL_EN |
> + MG_PLL_BIAS_CTRIM(12) |
> + MG_PLL_BIAS_VREF_RDAC(4) |
> + MG_PLL_BIAS_IREFTRIM(iref_trim);
> +
> + if (refclk_khz == 38400) {
> + pll_state->mg_pll_tdc_coldst_bias_mask =
> + MG_PLL_TDC_COLDST_COLDSTART;
> + pll_state->mg_pll_bias_mask = 0;
> + } else {
> + pll_state->mg_pll_tdc_coldst_bias_mask = -1U;
> + pll_state->mg_pll_bias_mask = -1U;
> + }
>
> - pll_state->mg_pll_tdc_coldst_bias &= pll_state-
> >mg_pll_tdc_coldst_bias_mask;
> - pll_state->mg_pll_bias &= pll_state->mg_pll_bias_mask;
> + pll_state->mg_pll_tdc_coldst_bias &=
> + pll_state->mg_pll_tdc_coldst_bias_mask;
> + pll_state->mg_pll_bias &= pll_state->mg_pll_bias_mask;
> + }
>
> return true;
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
