On Tue, Jul 16, 2019 at 07:13:16PM -0700, Vivek Kasireddy wrote:
> Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE
> register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's
> CR0 and CR1 registers by passing an id of 4 to these macros.
>
> Reported-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: José Roberto de Souza <jose.souza@xxxxxxxxx>
> Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Cc: Imre Deak <imre.deak@xxxxxxxxx>
> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 319a26a1ec10..f9bdf8514a53 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -3127,8 +3127,13 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
> hw_state->cfgcr0 = I915_READ(TGL_DPLL_CFGCR0(id));
> hw_state->cfgcr1 = I915_READ(TGL_DPLL_CFGCR1(id));
> } else {
> - hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
> - hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
> + if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) {
> + hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(4));
> + hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(4));
> + } else {
> + hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
> + hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
> + }
> }
>
> ret = true;
> @@ -3169,8 +3174,13 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
> cfgcr0_reg = TGL_DPLL_CFGCR0(id);
> cfgcr1_reg = TGL_DPLL_CFGCR1(id);
> } else {
> - cfgcr0_reg = ICL_DPLL_CFGCR0(id);
> - cfgcr1_reg = ICL_DPLL_CFGCR1(id);
> + if (IS_ELKHARTLAKE(dev_priv) && id == DPLL_ID_EHL_DPLL4) {
> + cfgcr0_reg = ICL_DPLL_CFGCR0(4);
> + cfgcr1_reg = ICL_DPLL_CFGCR1(4);
> + } else {
> + cfgcr0_reg = ICL_DPLL_CFGCR0(id);
> + cfgcr1_reg = ICL_DPLL_CFGCR1(id);
> + }
I was a bit worried this would also affect other parts of the code, but
at least ICL_DPCLKA_CFGCR0_DDI_CLK_SEL() seems to do the right thing
with the id==2, and I couldn't immediately spot other issues.
Also surprising that ci didn't get confused by the fact that this was posted
as a reply to another series. Generally you should avoid replying with
anything except direct replacements for the original patches in the
series.
Pushed to dinq. Thanks for the patch.
> }
>
> I915_WRITE(cfgcr0_reg, hw_state->cfgcr0);
> --
> 2.21.0
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
