Re: [igt-dev] [PATCH V6 i-g-t 5/6] lib/igt_kms: Add igt_output_clone_pipe for cloning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2019-07-16 at 22:47 -0300, Rodrigo Siqueira wrote:
> On 07/12, Ser, Simon wrote:
> > So, to test these last two patches we'd need specific hardware right?
> > Because VKMS doesn't support cloning yet (does it?).
> 
> hmmm... actually, VKMS successfully pass in this test. However, if you
> compare "writeback-check-output" and "writeback-check-output-clone", you
> will notice they are very similar. Maybe, this test does not correctly
> validating cloning feature?

Hmm. Are you sure it doesn't skip at igt_require(clone)? It should,
because VKMS only exposes one connector… Might be a bug in the test.

> > What kind of hardware supports cloned writeback outputs? I have a
> > Raspberry Pi which supports writeback via VC4, but I don't think it has
> > writeback cloning. I'm also not willing to install any proprietary
> > driver.
> > 
> > I guess we could land the first part of the series, and wait for VKMS
> > to support cloned outputs to land the last two patches.
> > 
> > Any other ideas?
> 
> btw, I'm totally comfortable with the idea of focusing on the first part
> of this series.

Yeah, let's land the first part and keep cloning for later :)

> Thanks
>  
> > On Wed, 2019-06-12 at 23:18 -0300, Brian Starkey wrote:
> > > An output can be added as a clone of any other output(s) attached to a
> > > pipe using igt_output_clone_pipe()
> > > 
> > > v5: Drop field out_fence_requested from struct igt_pipe (Brian Starkey)
> > > 
> > > Signed-off-by: Brian Starkey <brian.starkey@xxxxxxx>
> > > ---
> > >  lib/igt_kms.c | 100 +++++++++++++++++++++++++++++++-------------------
> > >  lib/igt_kms.h |   4 ++
> > >  2 files changed, 66 insertions(+), 38 deletions(-)
> > > 
> > > diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> > > index 140db346..b85a0404 100644
> > > --- a/lib/igt_kms.c
> > > +++ b/lib/igt_kms.c
> > > @@ -1765,6 +1765,17 @@ static void igt_display_log_shift(igt_display_t *display, int shift)
> > >  	igt_assert(display->log_shift >= 0);
> > >  }
> > >  
> > > +static int igt_output_idx(igt_output_t *output)
> > > +{
> > > +	int i;
> > > +
> > > +	for (i = 0; i < output->display->n_outputs; i++)
> > > +		if (&output->display->outputs[i] == output)
> > > +			return i;
> > > +
> > > +	return -1;
> > > +}
> > > +
> > >  static void igt_output_refresh(igt_output_t *output)
> > >  {
> > >  	igt_display_t *display = output->display;
> > > @@ -2317,42 +2328,6 @@ void igt_display_fini(igt_display_t *display)
> > >  	display->planes = NULL;
> > >  }
> > >  
> > > -static void igt_display_refresh(igt_display_t *display)
> > > -{
> > > -	igt_output_t *output;
> > > -	int i;
> > > -
> > > -	unsigned long pipes_in_use = 0;
> > > -
> > > -       /* Check that two outputs aren't trying to use the same pipe */
> > > -	for (i = 0; i < display->n_outputs; i++) {
> > > -		output = &display->outputs[i];
> > > -
> > > -		if (output->pending_pipe != PIPE_NONE) {
> > > -			if (pipes_in_use & (1 << output->pending_pipe))
> > > -				goto report_dup;
> > > -
> > > -			pipes_in_use |= 1 << output->pending_pipe;
> > > -		}
> > > -
> > > -		if (output->force_reprobe)
> > > -			igt_output_refresh(output);
> > > -	}
> > > -
> > > -	return;
> > > -
> > > -report_dup:
> > > -	for (; i > 0; i--) {
> > > -		igt_output_t *b = &display->outputs[i - 1];
> > > -
> > > -		igt_assert_f(output->pending_pipe !=
> > > -			     b->pending_pipe,
> > > -			     "%s and %s are both trying to use pipe %s\n",
> > > -			     igt_output_name(output), igt_output_name(b),
> > > -			     kmstest_pipe_name(output->pending_pipe));
> > > -	}
> > > -}
> > > -
> > >  static igt_pipe_t *igt_output_get_driving_pipe(igt_output_t *output)
> > >  {
> > >  	igt_display_t *display = output->display;
> > > @@ -2376,6 +2351,40 @@ static igt_pipe_t *igt_output_get_driving_pipe(igt_output_t *output)
> > >  	return &display->pipes[pipe];
> > >  }
> > >  
> > > +static void igt_display_refresh(igt_display_t *display)
> > > +{
> > > +	igt_output_t *output;
> > > +	igt_pipe_t *pipe;
> > > +	int i;
> > > +
> > > +	unsigned long pipes_in_use = 0;
> > > +	unsigned long pending_crtc_idx_mask;
> > > +
> > > +	/* Check that outputs and pipes agree wrt. cloning */
> > > +	for (i = 0; i < display->n_outputs; i++) {
> > > +		output = &display->outputs[i];
> > > +		pending_crtc_idx_mask = 1 << output->pending_pipe;
> > > +
> > > +		pipe = igt_output_get_driving_pipe(output);
> > > +		if (pipe) {
> > > +			igt_assert_f(pipe->outputs & (1 << igt_output_idx(output)),
> > > +				     "Output %s not expected to be using pipe %s\n",
> > > +				     igt_output_name(output),
> > > +				     kmstest_pipe_name(pipe->pipe));
> > > +
> > > +			if (pipes_in_use & pending_crtc_idx_mask)
> > > +				LOG(display, "Output %s clones pipe %s\n",
> > > +				    igt_output_name(output),
> > > +				    kmstest_pipe_name(pipe->pipe));
> > > +		}
> > > +
> > > +		pipes_in_use |= pending_crtc_idx_mask;
> > > +
> > > +		if (output->force_reprobe)
> > > +			igt_output_refresh(output);
> > > +	}
> > > +}
> > > +
> > >  static igt_plane_t *igt_pipe_get_plane(igt_pipe_t *pipe, int plane_idx)
> > >  {
> > >  	igt_require_f(plane_idx >= 0 && plane_idx < pipe->n_planes,
> > > @@ -3766,6 +3775,7 @@ void igt_output_override_mode(igt_output_t *output, const drmModeModeInfo *mode)
> > >  	output->use_override_mode = !!mode;
> > >  
> > >  	if (pipe) {
> > > +		igt_debug("overriding pipe mode in %s way\n", output->display->is_atomic ? "atomic" : "legacy");
> > >  		if (output->display->is_atomic)
> > >  			igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, igt_output_get_mode(output), sizeof(*mode));
> > >  		else
> > > @@ -3773,6 +3783,16 @@ void igt_output_override_mode(igt_output_t *output, const drmModeModeInfo *mode)
> > >  	}
> > >  }
> > >  
> > > +void igt_output_clone_pipe(igt_output_t *output, enum pipe pipe)
> > > +{
> > > +	igt_display_t *display = output->display;
> > > +	uint32_t current_clones = display->pipes[pipe].outputs;
> > > +
> > > +	igt_output_set_pipe(output, pipe);
> > > +
> > > +	display->pipes[pipe].outputs |= current_clones;
> > > +}
> > > +
> > >  /*
> > >   * igt_output_set_pipe:
> > >   * @output: Target output for which the pipe is being set to
> > > @@ -3789,11 +3809,15 @@ void igt_output_set_pipe(igt_output_t *output, enum pipe pipe)
> > >  
> > >  	igt_assert(output->name);
> > >  
> > > -	if (output->pending_pipe != PIPE_NONE)
> > > +	if (output->pending_pipe != PIPE_NONE) {
> > >  		old_pipe = igt_output_get_driving_pipe(output);
> > > +		old_pipe->outputs &= ~(1 << igt_output_idx(output));
> > > +	}
> > >  
> > > -	if (pipe != PIPE_NONE)
> > > +	if (pipe != PIPE_NONE) {
> > >  		pipe_obj = &display->pipes[pipe];
> > > +		pipe_obj->outputs = (1 << igt_output_idx(output));
> > > +	}
> > >  
> > >  	LOG(display, "%s: set_pipe(%s)\n", igt_output_name(output),
> > >  	    kmstest_pipe_name(pipe));
> > > diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> > > index cacc6b90..676839bb 100644
> > > --- a/lib/igt_kms.h
> > > +++ b/lib/igt_kms.h
> > > @@ -354,6 +354,8 @@ struct igt_pipe {
> > >  	uint32_t crtc_id;
> > >  
> > >  	int32_t out_fence_fd;
> > > +
> > > +	uint32_t outputs;
> > >  };
> > >  
> > >  typedef struct {
> > > @@ -411,6 +413,8 @@ const char *igt_output_name(igt_output_t *output);
> > >  drmModeModeInfo *igt_output_get_mode(igt_output_t *output);
> > >  void igt_output_override_mode(igt_output_t *output, const drmModeModeInfo *mode);
> > >  void igt_output_set_pipe(igt_output_t *output, enum pipe pipe);
> > > +void igt_output_clone_pipe(igt_output_t *output, enum pipe pipe);
> > > +
> > >  igt_plane_t *igt_output_get_plane(igt_output_t *output, int plane_idx);
> > >  igt_plane_t *igt_output_get_plane_type(igt_output_t *output, int plane_type);
> > >  int igt_output_count_plane_type(igt_output_t *output, int plane_type);
> > > _______________________________________________
> > > igt-dev mailing list
> > > igt-dev@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux