On Fri, Jul 12, 2019 at 01:22:14PM -0700, Manasi Navare wrote:
> On ICL+, the max supported plane height is 4320, so bump it up
> To support 4320, we need to increase the number of bits used to
> read plane_height to 13 as opposed to older 12 bits.
>
> v3:
> * Use 0xffff for mask as extra bits are mbz (Ville)
> v2:
> * ICL plane height supported is 4320 (Ville)
> * Add a new line between max width and max height (Jose)
>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 15006764862b..5103504bbbec 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
> return 5120;
> }
>
> +static int skl_max_plane_height(void)
> +{
> + return 4096;
> +}
> +
> +static int icl_max_plane_height(void)
> +{
> + return 4320;
> +}
> +
> static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
> int main_x, int main_y, u32 main_offset)
> {
> @@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> int w = drm_rect_width(&plane_state->base.src) >> 16;
> int h = drm_rect_height(&plane_state->base.src) >> 16;
> int max_width;
> - int max_height = 4096;
> + int max_height;
> u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
>
> if (INTEL_GEN(dev_priv) >= 11)
> @@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> else
> max_width = skl_max_plane_width(fb, 0, rotation);
>
> + if (INTEL_GEN(dev_priv) >= 11)
> + max_height = icl_max_plane_height();
> + else
> + max_height = skl_max_plane_height();
> +
> if (w > max_width || h > max_height) {
> DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
> w, h, max_width, max_height);
> @@ -9865,7 +9880,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
> offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
>
> val = I915_READ(PLANE_SIZE(pipe, plane_id));
> - fb->height = ((val >> 16) & 0xfff) + 1;
> + fb->height = ((val >> 16) & 0xffff) + 1;
> fb->width = ((val >> 0) & 0x1fff) + 1;
I would adjust the mask for width as well.
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> val = I915_READ(PLANE_STRIDE(pipe, plane_id));
> --
> 2.19.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
