Re: [PATCH v3 2/2] drm/i915/display/icl: Bump up the plane/fb height

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 12, 2019 at 01:15:53PM -0700, Manasi Navare wrote:
> On Thu, Jul 11, 2019 at 01:38:16PM +0300, Ville Syrjälä wrote:
> > On Wed, Jul 10, 2019 at 02:39:51PM -0700, Manasi Navare wrote:
> > > On ICL+, the max supported plane height is 4320, so bump it up
> > > To support 4320, we need to increase the number of bits used to
> > > read plane_height to 13 as opposed to older 12 bits.
> > > 
> > > v2:
> > > * ICL plane height supported is 4320 (Ville)
> > > * Add a new line between max width and max height (Jose)
> > > 
> > > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_display.c | 22 ++++++++++++++++++--
> > >  1 file changed, 20 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 9883f607bb88..e4915d68147a 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
> > >  	return 5120;
> > >  }
> > >  
> > > +static int skl_max_plane_height(void)
> > > +{
> > > +	return 4096;
> > > +}
> > > +
> > > +static int icl_max_plane_height(void)
> > > +{
> > > +	return 4320;
> > > +}
> > > +
> > >  static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
> > >  					   int main_x, int main_y, u32 main_offset)
> > >  {
> > > @@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> > >  	int w = drm_rect_width(&plane_state->base.src) >> 16;
> > >  	int h = drm_rect_height(&plane_state->base.src) >> 16;
> > >  	int max_width;
> > > -	int max_height = 4096;
> > > +	int max_height;
> > >  	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
> > >  
> > >  	if (INTEL_GEN(dev_priv) >= 11)
> > > @@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> > >  	else
> > >  		max_width = skl_max_plane_width(fb, 0, rotation);
> > >  
> > > +	if (INTEL_GEN(dev_priv) >= 11)
> > > +		max_height = icl_max_plane_height();
> > > +	else
> > > +		max_height = skl_max_plane_height();
> > > +
> > >  	if (w > max_width || h > max_height) {
> > >  		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
> > >  			      w, h, max_width, max_height);
> > > @@ -9865,7 +9880,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
> > >  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
> > >  
> > >  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> > > -	fb->height = ((val >> 16) & 0xfff) + 1;
> > > +	if (INTEL_GEN(dev_priv) >= 12)
> > > +		fb->height = ((val >> 16) & 0x1fff) + 1;
> > > +	else
> > > +		fb->height = ((val >> 16) & 0xfff) + 1;
> > >  	fb->width = ((val >> 0) & 0x1fff) + 1;
> > 
> > The extra bits should be mbz I think, so no need for the 'if'.
> > Just use 0x1fff always, or even extend both masks to 0xffff.
> 
> Yes I double checked, all the extra bits (31:28) for older platforms
> are MBZ so yes I will just use 0xffff as the mask then
> 
> > 
> > Looks like i9xx_get_initial_plane_config() is also missing a bit or two,
> > which should be fixed with a separate patch.
> 
> But isnt that hook for older platforms?

Yes it is.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux