On Thu, 2019-06-20 at 17:05 +0300, Imre Deak wrote:
> Make the order during detection more consistent: first reset the
> TypeC
> port mode if needed (adding new helpers for this), then detect any
> connected sink.
>
> To check if a port mode reset is needed determine first the target
> port
> mode based on the live status if a sink is already connected or the
> PHY status complete flag otherwise.
>
> Add a WARN in legacy mode if unexpectedly we can't set the unsafe
> mode
> or if the FIA doesn't provide the 4 lanes required.
>
> Cc: José Roberto de Souza <jose.souza@xxxxxxxxx>
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/display/intel_tc.c | 96 ++++++++++++-----------
> --
> 1 file changed, 47 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_tc.c
> b/drivers/gpu/drm/i915/display/intel_tc.c
> index fffe4c4a6602..ed2253b21b09 100644
> --- a/drivers/gpu/drm/i915/display/intel_tc.c
> +++ b/drivers/gpu/drm/i915/display/intel_tc.c
> @@ -172,41 +172,43 @@ static bool icl_tc_phy_set_safe_mode(struct
> intel_digital_port *dig_port,
> * will require a lot of coordination with user space and thorough
> testing for
> * the extra possible cases.
> */
> -static bool icl_tc_phy_connect(struct intel_digital_port *dig_port)
> +static void icl_tc_phy_connect(struct intel_digital_port *dig_port)
> {
> - u32 live_status_mask;
> -
> - if (dig_port->tc_mode != TC_PORT_LEGACY &&
> - dig_port->tc_mode != TC_PORT_DP_ALT)
> - return true;
> -
> if (!icl_tc_phy_status_complete(dig_port)) {
> DRM_DEBUG_KMS("Port %s: PHY not ready\n",
> dig_port->tc_port_name);
> - WARN_ON(dig_port->tc_legacy_port);
> - return false;
> + goto out_set_tbt_alt_mode;
> }
>
> - if (!icl_tc_phy_set_safe_mode(dig_port, false))
> - return false;
> + if (!icl_tc_phy_set_safe_mode(dig_port, false) &&
> + !WARN_ON(dig_port->tc_legacy_port))
> + goto out_set_tbt_alt_mode;
Marking as not safe even for TBT?
>
> - if (dig_port->tc_mode == TC_PORT_LEGACY)
> - return true;
> + if (dig_port->tc_legacy_port) {
> + WARN_ON(intel_tc_port_fia_max_lane_count(dig_port) !=
> 4);
> + dig_port->tc_mode = TC_PORT_LEGACY;
>
> - live_status_mask = tc_port_live_status_mask(dig_port);
> + return;
> + }
>
> /*
> * Now we have to re-check the live state, in case the port
> recently
> * became disconnected. Not necessary for legacy mode.
> */
> - if (!(live_status_mask & BIT(TC_PORT_DP_ALT))) {
> + if (!(tc_port_live_status_mask(dig_port) &
> BIT(TC_PORT_DP_ALT))) {
> DRM_DEBUG_KMS("Port %s: PHY sudden disconnect\n",
> dig_port->tc_port_name);
> - icl_tc_phy_disconnect(dig_port);
> - return false;
> + goto out_set_safe_mode;
> }
>
> - return true;
> + dig_port->tc_mode = TC_PORT_DP_ALT;
> +
> + return;
> +
> +out_set_safe_mode:
> + icl_tc_phy_set_safe_mode(dig_port, true);
> +out_set_tbt_alt_mode:
> + dig_port->tc_mode = TC_PORT_TBT_ALT;
> }
>
> /*
> @@ -227,27 +229,37 @@ void icl_tc_phy_disconnect(struct
> intel_digital_port *dig_port)
> default:
> MISSING_CASE(dig_port->tc_mode);
> }
> +}
>
> - DRM_DEBUG_KMS("Port %s: mode %s disconnected\n",
> - dig_port->tc_port_name,
> - tc_port_mode_name(dig_port->tc_mode));
> +static enum tc_port_mode
> +intel_tc_port_get_target_mode(struct intel_digital_port *dig_port)
> +{
> + u32 live_status_mask = tc_port_live_status_mask(dig_port);
> +
> + if (live_status_mask)
> + return fls(live_status_mask) - 1;
> +
> + return icl_tc_phy_status_complete(dig_port) &&
> + dig_port->tc_legacy_port ? TC_PORT_LEGACY :
> + TC_PORT_TBT_ALT;
You are right about the order that C will execute this but could you
add a pair of parenthesis around icl_tc_phy_status_complete(dig_port)
&& dig_port->tc_legacy_port to make easier to read?
> }
>
> -static void icl_update_tc_port_type(struct drm_i915_private
> *dev_priv,
> - struct intel_digital_port
> *intel_dig_port,
> - u32 live_status_mask)
> +static void intel_tc_port_reset_mode(struct intel_digital_port
> *dig_port)
> {
> - enum tc_port_mode old_mode = intel_dig_port->tc_mode;
> + enum tc_port_mode old_tc_mode = dig_port->tc_mode;
>
> - if (!live_status_mask)
> - return;
> + icl_tc_phy_disconnect(dig_port);
> + icl_tc_phy_connect(dig_port);
>
> - intel_dig_port->tc_mode = fls(live_status_mask) - 1;
> + DRM_DEBUG_KMS("Port %s: TC port mode reset (%s -> %s)\n",
> + dig_port->tc_port_name,
> + tc_port_mode_name(old_tc_mode),
> + tc_port_mode_name(dig_port->tc_mode));
> +}
>
> - if (old_mode != intel_dig_port->tc_mode)
> - DRM_DEBUG_KMS("Port %s: port has mode %s\n",
> - intel_dig_port->tc_port_name,
> - tc_port_mode_name(intel_dig_port-
> >tc_mode));
> +static bool intel_tc_port_needs_reset(struct intel_digital_port
> *dig_port)
> +{
> + return intel_tc_port_get_target_mode(dig_port) != dig_port-
> >tc_mode;
> }
>
> /*
> @@ -262,24 +274,10 @@ static void icl_update_tc_port_type(struct
> drm_i915_private *dev_priv,
> */
> bool intel_tc_port_connected(struct intel_digital_port *dig_port)
> {
> - struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> - u32 live_status_mask = tc_port_live_status_mask(dig_port);
> -
> - /*
> - * The spec says we shouldn't be using the ISR bits for
> detecting
> - * between TC and TBT. We should use DFLEXDPSP.
> - */
> - if (!live_status_mask && !dig_port->tc_legacy_port) {
> - icl_tc_phy_disconnect(dig_port);
> -
> - return false;
> - }
> -
> - icl_update_tc_port_type(dev_priv, dig_port, live_status_mask);
> - if (!icl_tc_phy_connect(dig_port))
> - return false;
> + if (intel_tc_port_needs_reset(dig_port))
> + intel_tc_port_reset_mode(dig_port);
>
> - return true;
> + return tc_port_live_status_mask(dig_port) & BIT(dig_port-
> >tc_mode);
> }
>
> void intel_tc_port_init(struct intel_digital_port *dig_port, bool
> is_legacy)
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
