Re: [PATCH 2/2] drm/i915/ehl/dsi: Enable AFE over PPI strap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 18, 2019 at 01:00:00PM -0700, José Roberto de Souza wrote:
> The other additional step in the DSI sequqence for EHL.
> 
> BSpec: 20597
> Cc: Uma Shankar <uma.shankar@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c | 8 ++++++++
>  drivers/gpu/drm/i915/i915_reg.h        | 4 ++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index ee85428b309f..3a601c739fc6 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -542,6 +542,14 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
>  			I915_WRITE(DSI_TA_TIMING_PARAM(port), tmp);
>  		}
>  	}
> +
> +	if (IS_ELKHARTLAKE(dev_priv)) {
> +		for_each_dsi_port(port, intel_dsi->ports) {
> +			tmp = I915_READ(ICL_DPHY_CHKN(port));
> +			tmp |= ICL_DPHY_CHKN_AFE_OVER_PPI_STRAP;
> +			I915_WRITE(ICL_DPHY_CHKN(port), tmp);
> +		}
> +	}
>  }
>  
>  static void gen11_dsi_gate_clocks(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1f2c3ebdf87b..dc7b34cf8b42 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1993,6 +1993,10 @@ enum i915_power_well_id {
>  #define   N_SCALAR(x)			((x) << 24)
>  #define   N_SCALAR_MASK			(0x7F << 24)
>  
> +#define _ICL_DPHY_CHKN_REG			0x194
> +#define ICL_DPHY_CHKN(port)			_MMIO(_ICL_COMBOPHY(port) + _ICL_DPHY_CHKN_REG)
> +#define   ICL_DPHY_CHKN_AFE_OVER_PPI_STRAP	(1 << 7)
> +

Since this is a new register, should we be using REG_BIT() for the bit
definition as described at the top of the file?

Other than that, this all matches the bspec so

Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>


>  #define MG_PHY_PORT_LN(ln, port, ln0p1, ln0p2, ln1p1) \
>  	_MMIO(_PORT((port) - PORT_C, ln0p1, ln0p2) + (ln) * ((ln1p1) - (ln0p1)))
>  
> -- 
> 2.22.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux