Re: [PATCH 5/5] drm/i915: Improve WRPLL reference clock readout on HSW/BDW

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 04-06-2019 om 22:09 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> On non-ULT HSW the "special" WRPLL reference clock select
> actually means non-SSC. Take that into account when reading
> out the WRPLL state.
>
> Also the non-SSC reference may be either 24MHz or 135MHz,
> which we can read out from FUSE_STRAP3. The BDW docs actually
> say: "also indicates whether the CPU and PCH are in a single
> package or separate packages", so it may be that this is not
> actually required and we could just assume 135 MHz (just like
> the code already did). But it doesn't really hurt to read this
> out as the HSW docs aren't quite so clear.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h  |  3 +++
>  drivers/gpu/drm/i915/intel_ddi.c | 15 ++++++++++++++-
>  2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index b7dd42bfffaa..533b1d8d23cb 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7513,6 +7513,9 @@ enum {
>  #define  ILK_DESKTOP			(1 << 23)
>  #define  HSW_CPU_SSC_ENABLE		(1 << 21)
>  
> +#define FUSE_STRAP3			_MMIO(0x42020)
> +#define  HSW_REF_CLK_SELECT		(1 << 1)
> +
>  #define ILK_DSPCLK_GATE_D			_MMIO(0x42020)
>  #define   ILK_VRHUNIT_CLOCK_GATE_DISABLE	(1 << 28)
>  #define   ILK_DPFCUNIT_CLOCK_GATE_DISABLE	(1 << 9)
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index fc9bcbd75c3a..49dab3e72019 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1231,6 +1231,19 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
>  	wrpll = I915_READ(reg);
>  	switch (wrpll & WRPLL_REF_MASK) {
>  	case WRPLL_REF_SPECIAL_HSW:
> +		/*
> +		 * muxed-SSC for BDW.
> +		 * non-SSC for non-ULT HSW. Check FUSE_STRAP3
> +		 * for the non-SSC reference frequency.
> +		 */
> +		if (IS_HASWELL(dev_priv) && !IS_HSW_ULT(dev_priv)) {
> +			if (I915_READ(FUSE_STRAP3) & HSW_REF_CLK_SELECT)
> +				refclk = 24;
> +			else
> +				refclk = 135;
> +			break;
> +		}
> +		/* fall through */
>  	case WRPLL_REF_PCH_SSC:
>  		/*
>  		 * We could calculate spread here, but our checking
> @@ -1243,7 +1256,7 @@ static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
>  		refclk = 2700;
>  		break;
>  	default:
> -		WARN(1, "bad wrpll refclk\n");
> +		MISSING_CASE(wrpll);
>  		return 0;
>  	}
>  

Other patches look sane.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux