ICL introduces a new gamma correction mode in display engine, called
multi-segmented-gamma mode. This mode allows users to program the
darker region of the gamma curve with sueprfine precision. An
example use case for this is HDR curves (like PQ ST-2084).
If we plot a gamma correction curve from value range between 0.0 to 1.0,
ICL's multi-segment has 3 different sections:
- superfine segment: 9 values, ranges between 0 - 1/(128 * 256)
- fine segment: 257 values, ranges between 0 - 1/(128)
- corase segment: 257 values, ranges between 0 - 1
This patch:
- Changes gamma LUTs size for ICL/GEN11 to 262144 entries (8 * 128 * 256),
so that userspace can program with highest precision supported.
- Changes default gamma mode (non-legacy) to multi-segmented-gamma mode.
- Adds functions to program/detect multi-segment gamma.
V2: Addressed review comments from Ville
- separate function for superfine and fine segments.
- remove enum for segments.
- reuse last entry of the LUT as gc_max value.
- replace if() ....cond with switch...case in icl_load_luts.
- add an entry variable, instead of 'word'
V3: Addressed review comments from Ville
- extra newline
- s/entry/color/
- remove LUT size checks
- program ilk_lut_12p4_ldw value before ilk_lut_12p4_udw
- Change the comments in description of fine and coarse segments,
and try to make more sense.
- use 8 * 128 instead of 1024
- add 1 entry in LUT for GCMAX
V4: Addressed review comments from Ville
- Remove unused macro
- missing shift entry in blue
- pick correct entry for GCMAX
- Added Ville's R-B
Note: Tested and confirmed the programming sequence of odd/even
registers in the HW. The correct sequence should be:
ilk_lut_12p4_udw
ilk_lut_12p4_ldw
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_pci.c | 2 +-
drivers/gpu/drm/i915/intel_color.c | 126 ++++++++++++++++++++++++++++-
2 files changed, 123 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index d7c07a947497..24305238b4ea 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -747,7 +747,7 @@ static const struct intel_device_info intel_cannonlake_info = {
GEN(11), \
.ddb_size = 2048, \
.has_logical_ring_elsq = 1, \
- .color = { .degamma_lut_size = 33, .gamma_lut_size = 1024 }
+ .color = { .degamma_lut_size = 33, .gamma_lut_size = 262145 }
static const struct intel_device_info intel_icelake_11_info = {
GEN11_FEATURES,
diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index 6c341bea514c..22ccbeacbee2 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -41,6 +41,7 @@
#define CTM_COEFF_ABS(coeff) ((coeff) & (CTM_COEFF_SIGN - 1))
#define LEGACY_LUT_LENGTH 256
+
/*
* Extract the CSC coefficient from a CTM coefficient (in U32.32 fixed point
* format). This macro takes the coefficient we want transformed and the
@@ -767,6 +768,116 @@ static void glk_load_luts(const struct intel_crtc_state *crtc_state)
}
}
+/* ilk+ "12.4" interpolated format (high 10 bits) */
+static u32 ilk_lut_12p4_ldw(const struct drm_color_lut *color)
+{
+ return (color->red >> 6) << 20 | (color->green >> 6) << 10 |
+ (color->blue >> 6);
+}
+
+/* ilk+ "12.4" interpolated format (low 6 bits) */
+static u32 ilk_lut_12p4_udw(const struct drm_color_lut *color)
+{
+ return (color->red & 0x3f) << 24 | (color->green & 0x3f) << 14 |
+ (color->blue & 0x3f << 4);
+}
+
+static void
+icl_load_gcmax(const struct intel_crtc_state *crtc_state,
+ const struct drm_color_lut *color)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ enum pipe pipe = crtc->pipe;
+
+ /* Fixme: LUT entries are 16 bit only, so we can prog 0xFFFF max */
+ I915_WRITE(PREC_PAL_GC_MAX(pipe, 0), color->red);
+ I915_WRITE(PREC_PAL_GC_MAX(pipe, 1), color->green);
+ I915_WRITE(PREC_PAL_GC_MAX(pipe, 2), color->blue);
+}
+
+static void
+icl_program_gamma_superfine_segment(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ const struct drm_property_blob *blob = crtc_state->base.gamma_lut;
+ const struct drm_color_lut *lut = blob->data;
+ enum pipe pipe = crtc->pipe;
+ u32 i;
+
+ /*
+ * Every entry in the multi-segment LUT is corresponding to a superfine
+ * segment step which is 1/(8 * 128 * 256).
+ *
+ * Superfine segment has 9 entries, corresponding to values
+ * 0, 1/(8 * 128 * 256), 2/(8 * 128 * 256) .... 8/(8 * 128 * 256).
+ */
+ I915_WRITE(PREC_PAL_MULTI_SEG_INDEX(pipe), PAL_PREC_AUTO_INCREMENT);
+
+ for (i = 0; i < 9; i++) {
+ const struct drm_color_lut *entry = &lut[i];
+
+ I915_WRITE(PREC_PAL_MULTI_SEG_DATA(pipe),
+ ilk_lut_12p4_udw(entry));
+ I915_WRITE(PREC_PAL_MULTI_SEG_DATA(pipe),
+ ilk_lut_12p4_ldw(entry));
+ }
+}
+
+static void
+icl_program_gamma_multi_segment(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ const struct drm_property_blob *blob = crtc_state->base.gamma_lut;
+ const struct drm_color_lut *lut = blob->data;
+ const struct drm_color_lut *entry;
+ enum pipe pipe = crtc->pipe;
+ u32 i;
+
+ /*
+ *
+ * Program Fine segment (let's call it seg2)...
+ *
+ * Fine segment's step is 1/(128 * 256) ie 1/(128 * 256), 2/(128*256)
+ * ... 256/(128*256). So in order to program fine segment of LUT we
+ * need to pick every 8'th entry in LUT, and program 256 indexes.
+ *
+ * PAL_PREC_INDEX[0] and PAL_PREC_INDEX[1] map to seg2[1],
+ * with seg2[0] being unused by the hardware.
+ */
+ I915_WRITE(PREC_PAL_INDEX(pipe), PAL_PREC_AUTO_INCREMENT);
+ for (i = 1; i < 257; i++) {
+ entry = &lut[i * 8];
+ I915_WRITE(PREC_PAL_DATA(pipe), ilk_lut_12p4_udw(entry));
+ I915_WRITE(PREC_PAL_DATA(pipe), ilk_lut_12p4_ldw(entry));
+ }
+
+ /*
+ * Program Coarse segment (let's call it seg3)...
+ *
+ * Coarse segment's starts from index 0 and it's step is 1/256 ie 0,
+ * 1/256, 2/256 ...256/256. As per the description of each entry in LUT
+ * above, we need to pick every (8 * 128)th entry in LUT, and
+ * program 256 of those.
+ *
+ * Spec is not very clear about if entries seg3[0] and seg3[1] are
+ * being used or not, but we still need to program these to advance
+ * the index.
+ */
+ for (i = 0; i < 256; i++) {
+ entry = &lut[i * 8 * 128];
+ I915_WRITE(PREC_PAL_DATA(pipe), ilk_lut_12p4_udw(entry));
+ I915_WRITE(PREC_PAL_DATA(pipe), ilk_lut_12p4_ldw(entry));
+ }
+
+ /* The last entry in the LUT is to be programmed in GCMAX */
+ entry = &lut[256 * 8 * 128];
+ icl_load_gcmax(crtc_state, entry);
+ ivb_load_lut_ext_max(crtc);
+}
+
static void icl_load_luts(const struct intel_crtc_state *crtc_state)
{
const struct drm_property_blob *gamma_lut = crtc_state->base.gamma_lut;
@@ -775,10 +886,17 @@ static void icl_load_luts(const struct intel_crtc_state *crtc_state)
if (crtc_state->base.degamma_lut)
glk_load_degamma_lut(crtc_state);
- if ((crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) ==
- GAMMA_MODE_MODE_8BIT) {
+ switch (crtc_state->gamma_mode & GAMMA_MODE_MODE_MASK) {
+ case GAMMA_MODE_MODE_8BIT:
i9xx_load_luts(crtc_state);
- } else {
+ break;
+
+ case GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED:
+ icl_program_gamma_superfine_segment(crtc_state);
+ icl_program_gamma_multi_segment(crtc_state);
+ break;
+
+ default:
bdw_load_lut_10(crtc, gamma_lut, PAL_PREC_INDEX_VALUE(0));
ivb_load_lut_ext_max(crtc);
}
@@ -1209,7 +1327,7 @@ static u32 icl_gamma_mode(const struct intel_crtc_state *crtc_state)
crtc_state_is_legacy_gamma(crtc_state))
gamma_mode |= GAMMA_MODE_MODE_8BIT;
else
- gamma_mode |= GAMMA_MODE_MODE_10BIT;
+ gamma_mode |= GAMMA_MODE_MODE_12BIT_MULTI_SEGMENTED;
return gamma_mode;
}
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
