Reduce clutter from i915_drv.h and intel_drv.h.
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 44 ---------
drivers/gpu/drm/i915/i915_utils.h | 153 ++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 108 ---------------------
3 files changed, 153 insertions(+), 152 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5f65c7..d16705 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3357,50 +3357,6 @@ extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
#define INTEL_BROADCAST_RGB_FULL 1
#define INTEL_BROADCAST_RGB_LIMITED 2
-static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m)
-{
- unsigned long j = msecs_to_jiffies(m);
-
- return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
-}
-
-static inline unsigned long nsecs_to_jiffies_timeout(const u64 n)
-{
- /* nsecs_to_jiffies64() does not guard against overflow */
- if (NSEC_PER_SEC % HZ &&
- div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ)
- return MAX_JIFFY_OFFSET;
-
- return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1);
-}
-
-/*
- * If you need to wait X milliseconds between events A and B, but event B
- * doesn't happen exactly after event A, you record the timestamp (jiffies) of
- * when event A happened, then just before event B you call this function and
- * pass the timestamp as the first argument, and X as the second argument.
- */
-static inline void
-wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms)
-{
- unsigned long target_jiffies, tmp_jiffies, remaining_jiffies;
-
- /*
- * Don't re-read the value of "jiffies" every time since it may change
- * behind our back and break the math.
- */
- tmp_jiffies = jiffies;
- target_jiffies = timestamp_jiffies +
- msecs_to_jiffies_timeout(to_wait_ms);
-
- if (time_after(target_jiffies, tmp_jiffies)) {
- remaining_jiffies = target_jiffies - tmp_jiffies;
- while (remaining_jiffies)
- remaining_jiffies =
- schedule_timeout_uninterruptible(remaining_jiffies);
- }
-}
-
void i915_memcpy_init_early(struct drm_i915_private *dev_priv);
bool i915_memcpy_from_wc(void *dst, const void *src, unsigned long len);
diff --git a/drivers/gpu/drm/i915/i915_utils.h b/drivers/gpu/drm/i915/i915_utils.h
index 26117b..c849cfa 100644
--- a/drivers/gpu/drm/i915/i915_utils.h
+++ b/drivers/gpu/drm/i915/i915_utils.h
@@ -26,6 +26,7 @@
#define __I915_UTILS_H
#include <linux/list.h>
+#include <linux/sched.h>
#include <linux/types.h>
#include <linux/workqueue.h>
@@ -176,6 +177,158 @@ static inline void drain_delayed_work(struct delayed_work *dw)
} while (delayed_work_pending(dw));
}
+static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m)
+{
+ unsigned long j = msecs_to_jiffies(m);
+
+ return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
+}
+
+static inline unsigned long nsecs_to_jiffies_timeout(const u64 n)
+{
+ /* nsecs_to_jiffies64() does not guard against overflow */
+ if (NSEC_PER_SEC % HZ &&
+ div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ)
+ return MAX_JIFFY_OFFSET;
+
+ return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1);
+}
+
+/*
+ * If you need to wait X milliseconds between events A and B, but event B
+ * doesn't happen exactly after event A, you record the timestamp (jiffies) of
+ * when event A happened, then just before event B you call this function and
+ * pass the timestamp as the first argument, and X as the second argument.
+ */
+static inline void
+wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms)
+{
+ unsigned long target_jiffies, tmp_jiffies, remaining_jiffies;
+
+ /*
+ * Don't re-read the value of "jiffies" every time since it may change
+ * behind our back and break the math.
+ */
+ tmp_jiffies = jiffies;
+ target_jiffies = timestamp_jiffies +
+ msecs_to_jiffies_timeout(to_wait_ms);
+
+ if (time_after(target_jiffies, tmp_jiffies)) {
+ remaining_jiffies = target_jiffies - tmp_jiffies;
+ while (remaining_jiffies)
+ remaining_jiffies =
+ schedule_timeout_uninterruptible(remaining_jiffies);
+ }
+}
+
+/**
+ * __wait_for - magic wait macro
+ *
+ * Macro to help avoid open coding check/wait/timeout patterns. Note that it's
+ * important that we check the condition again after having timed out, since the
+ * timeout could be due to preemption or similar and we've never had a chance to
+ * check the condition before the timeout.
+ */
+#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \
+ const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \
+ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \
+ int ret__; \
+ might_sleep(); \
+ for (;;) { \
+ const bool expired__ = ktime_after(ktime_get_raw(), end__); \
+ OP; \
+ /* Guarantee COND check prior to timeout */ \
+ barrier(); \
+ if (COND) { \
+ ret__ = 0; \
+ break; \
+ } \
+ if (expired__) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ usleep_range(wait__, wait__ * 2); \
+ if (wait__ < (Wmax)) \
+ wait__ <<= 1; \
+ } \
+ ret__; \
+})
+
+#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \
+ (Wmax))
+#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000)
+
+/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
+#if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
+# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic())
+#else
+# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0)
+#endif
+
+#define _wait_for_atomic(COND, US, ATOMIC) \
+({ \
+ int cpu, ret, timeout = (US) * 1000; \
+ u64 base; \
+ _WAIT_FOR_ATOMIC_CHECK(ATOMIC); \
+ if (!(ATOMIC)) { \
+ preempt_disable(); \
+ cpu = smp_processor_id(); \
+ } \
+ base = local_clock(); \
+ for (;;) { \
+ u64 now = local_clock(); \
+ if (!(ATOMIC)) \
+ preempt_enable(); \
+ /* Guarantee COND check prior to timeout */ \
+ barrier(); \
+ if (COND) { \
+ ret = 0; \
+ break; \
+ } \
+ if (now - base >= timeout) { \
+ ret = -ETIMEDOUT; \
+ break; \
+ } \
+ cpu_relax(); \
+ if (!(ATOMIC)) { \
+ preempt_disable(); \
+ if (unlikely(cpu != smp_processor_id())) { \
+ timeout -= now - base; \
+ cpu = smp_processor_id(); \
+ base = local_clock(); \
+ } \
+ } \
+ } \
+ ret; \
+})
+
+#define wait_for_us(COND, US) \
+({ \
+ int ret__; \
+ BUILD_BUG_ON(!__builtin_constant_p(US)); \
+ if ((US) > 10) \
+ ret__ = _wait_for((COND), (US), 10, 10); \
+ else \
+ ret__ = _wait_for_atomic((COND), (US), 0); \
+ ret__; \
+})
+
+#define wait_for_atomic_us(COND, US) \
+({ \
+ BUILD_BUG_ON(!__builtin_constant_p(US)); \
+ BUILD_BUG_ON((US) > 50000); \
+ _wait_for_atomic((COND), (US), 1); \
+})
+
+#define wait_for_atomic(COND, MS) wait_for_atomic_us((COND), (MS) * 1000)
+
+#define KHz(x) (1000 * (x))
+#define MHz(x) KHz(1000 * (x))
+
+#define KBps(x) (1000 * (x))
+#define MBps(x) KBps(1000 * (x))
+#define GBps(x) ((u64)1000 * MBps((x)))
+
static inline const char *yesno(bool v)
{
return v ? "yes" : "no";
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index addf6f..4049e03 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -46,114 +46,6 @@
struct drm_printer;
-/**
- * __wait_for - magic wait macro
- *
- * Macro to help avoid open coding check/wait/timeout patterns. Note that it's
- * important that we check the condition again after having timed out, since the
- * timeout could be due to preemption or similar and we've never had a chance to
- * check the condition before the timeout.
- */
-#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \
- const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \
- long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \
- int ret__; \
- might_sleep(); \
- for (;;) { \
- const bool expired__ = ktime_after(ktime_get_raw(), end__); \
- OP; \
- /* Guarantee COND check prior to timeout */ \
- barrier(); \
- if (COND) { \
- ret__ = 0; \
- break; \
- } \
- if (expired__) { \
- ret__ = -ETIMEDOUT; \
- break; \
- } \
- usleep_range(wait__, wait__ * 2); \
- if (wait__ < (Wmax)) \
- wait__ <<= 1; \
- } \
- ret__; \
-})
-
-#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \
- (Wmax))
-#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000)
-
-/* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
-#if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
-# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) WARN_ON_ONCE((ATOMIC) && !in_atomic())
-#else
-# define _WAIT_FOR_ATOMIC_CHECK(ATOMIC) do { } while (0)
-#endif
-
-#define _wait_for_atomic(COND, US, ATOMIC) \
-({ \
- int cpu, ret, timeout = (US) * 1000; \
- u64 base; \
- _WAIT_FOR_ATOMIC_CHECK(ATOMIC); \
- if (!(ATOMIC)) { \
- preempt_disable(); \
- cpu = smp_processor_id(); \
- } \
- base = local_clock(); \
- for (;;) { \
- u64 now = local_clock(); \
- if (!(ATOMIC)) \
- preempt_enable(); \
- /* Guarantee COND check prior to timeout */ \
- barrier(); \
- if (COND) { \
- ret = 0; \
- break; \
- } \
- if (now - base >= timeout) { \
- ret = -ETIMEDOUT; \
- break; \
- } \
- cpu_relax(); \
- if (!(ATOMIC)) { \
- preempt_disable(); \
- if (unlikely(cpu != smp_processor_id())) { \
- timeout -= now - base; \
- cpu = smp_processor_id(); \
- base = local_clock(); \
- } \
- } \
- } \
- ret; \
-})
-
-#define wait_for_us(COND, US) \
-({ \
- int ret__; \
- BUILD_BUG_ON(!__builtin_constant_p(US)); \
- if ((US) > 10) \
- ret__ = _wait_for((COND), (US), 10, 10); \
- else \
- ret__ = _wait_for_atomic((COND), (US), 0); \
- ret__; \
-})
-
-#define wait_for_atomic_us(COND, US) \
-({ \
- BUILD_BUG_ON(!__builtin_constant_p(US)); \
- BUILD_BUG_ON((US) > 50000); \
- _wait_for_atomic((COND), (US), 1); \
-})
-
-#define wait_for_atomic(COND, MS) wait_for_atomic_us((COND), (MS) * 1000)
-
-#define KHz(x) (1000 * (x))
-#define MHz(x) KHz(1000 * (x))
-
-#define KBps(x) (1000 * (x))
-#define MBps(x) KBps(1000 * (x))
-#define GBps(x) ((u64)1000 * MBps((x)))
-
/*
* Display related stuff
*/
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
