Re: [PATCH] drm/i915/ehl: Add support for DPLL4 (v3)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 05, 2019 at 10:59:53AM -0700, Vivek Kasireddy wrote:
This patch adds support for DPLL4 on EHL that include the
following restrictions:

- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
 DPLL4 can be used with other DDIs, including DDID
 (combo port A external usage).

- DPLL4 cannot be enabled when DC5 or DC6 are enabled.

- The DPLL4 enable, lock, power enabled, and power state are connected
 to the MGPLL1_ENABLE register.

ok


v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
 iterate twice: once for Combo plls and once for MG plls.

- Use MG pll funcs for DPLL4 instead of creating new ones and modify
 mg_pll_enable to include the restrictions for EHL.

these 2 don't match spec.

"3rd PLL for use with combo PHY (DPLL4) and 3rd combo PHY DDI clocks (DDIC clock)"

This is a combophy pll, not a mg phy pll. The only thing that is hooked to
mg registers is the enable. So my understanding is that what you need:

 - use the dpll calculations
 - make sure intel_find_shared_dpll doesn't this if it's for eDP
 - setup the enable/disable to use MG_ENABLE register


v3: Fix compilation error

Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@xxxxxxxxx>
Reviewed-by: Bob Paauwe <bob.j.paauwe@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dpll_mgr.c | 60 ++++++++++++++++++++++++++++++++++-
1 file changed, 59 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index e01c057ce50b..c3f0b9720c54 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -2870,6 +2870,56 @@ icl_get_dpll(struct intel_crtc_state *crtc_state,
	return pll;
}

+static struct intel_shared_dpll *
+ehl_get_dpll(struct intel_crtc_state *crtc_state,
+	     struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
+	struct intel_shared_dpll *pll;
+	enum port port = encoder->port;
+	enum intel_dpll_id min, max;
+	bool ret;
+
+	if (!intel_port_is_combophy(dev_priv, port)) {
+		MISSING_CASE(port);
+		return NULL;
+	}
+
+	min = DPLL_ID_ICL_DPLL0;
+	max = DPLL_ID_ICL_DPLL1;
+	ret = icl_calc_dpll_state(crtc_state, encoder);
+	if (ret) {
+		pll = intel_find_shared_dpll(crtc_state, min, max);
+		if (pll) {
+			intel_reference_shared_dpll(pll, crtc_state);
+			return pll;
+		}
+	} else {
+		DRM_DEBUG_KMS("Could not calculate PLL state.\n");

the check for ret is swapped and you are missing a return here.

But given the comments above, I think it would be better to reuse
icl_get_dpll() rather than what you are doing here.

+	}
+
+	if (encoder->type == INTEL_OUTPUT_EDP) {
+		DRM_DEBUG_KMS("Cannot use DPLL4 with EDP.\n");
+		return NULL;
+	}

this is already too late

+
+	min = max = DPLL_ID_ICL_MGPLL1;
+	ret = icl_calc_mg_pll_state(crtc_state);
+	if (!ret) {
+		DRM_DEBUG_KMS("Could not calculate PLL state.\n");
+		return NULL;

again... ret == 0 is success, not otherwise

Lucas De Marchi

+	}
+
+	pll = intel_find_shared_dpll(crtc_state, min, max);
+	if (!pll) {
+		DRM_DEBUG_KMS("No PLL selected\n");
+		return NULL;
+	}
+
+	intel_reference_shared_dpll(pll, crtc_state);
+	return pll;
+}
+
static bool mg_pll_get_hw_state(struct drm_i915_private *dev_priv,
				struct intel_shared_dpll *pll,
				struct intel_dpll_hw_state *hw_state)
@@ -3115,6 +3165,13 @@ static void mg_pll_enable(struct drm_i915_private *dev_priv,
	i915_reg_t enable_reg =
		MG_PLL_ENABLE(icl_pll_id_to_tc_port(pll->info->id));

+	if (IS_ELKHARTLAKE(dev_priv) &&
+	   (I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5 ||
+	    I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC6)) {
+		DRM_ERROR("Cant enable DPLL4 when DC5 or DC6 are enabled\n");
+		return;
+	}
+
	icl_pll_power_enable(dev_priv, pll, enable_reg);

	icl_mg_pll_write(dev_priv, pll);
@@ -3249,12 +3306,13 @@ static const struct intel_dpll_mgr icl_pll_mgr = {
static const struct dpll_info ehl_plls[] = {
	{ "DPLL 0", &combo_pll_funcs, DPLL_ID_ICL_DPLL0, 0 },
	{ "DPLL 1", &combo_pll_funcs, DPLL_ID_ICL_DPLL1, 0 },
+	{ "DPLL 4", &mg_pll_funcs, DPLL_ID_ICL_MGPLL1,0 },
	{ },
};

static const struct intel_dpll_mgr ehl_pll_mgr = {
	.dpll_info = ehl_plls,
-	.get_dpll = icl_get_dpll,
+	.get_dpll = ehl_get_dpll,
	.dump_hw_state = icl_dump_hw_state,
};

--
2.14.5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux