On Tue, Apr 02, 2019 at 11:22:22PM -0700, Aditya Swarup wrote: > From: Clinton Taylor <Clinton.A.Taylor@xxxxxxxxx> > > v2: Fix commit msg to reflect why issue occurs(Jani) > Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color. > > Changing settings from 10/12 bit deep color to 8 bit(& vice versa) > doesn't work correctly using xrandr max bpc property. When we > connect a monitor which supports deep color, the highest deep color > setting is selected; which sets GCP_COLOR_INDICATION. When we change > the setting to 8 bit color, we still set GCP_COLOR_INDICATION which > doesn't allow the switch back to 8 bit color. > > v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville) > Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc. > > Drop the changes in intel_hdmi_compute_config as desired_bpp > is needed to change values for pipe_bpp based on bw_constrained flag. > > v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION. > > Signed-off-by: Clinton Taylor <Clinton.A.Taylor@xxxxxxxxx> > Signed-off-by: Aditya Swarup <aditya.swarup@xxxxxxxxx> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Cc: Jani Nikula <jani.nikula@xxxxxxxxx> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx> > --- > I tested the patch and there is still a bug in setting 10 bit deep > color mode. I am unable to set 10 bit color from xrandr from 12 bit > deep color or 8 bit. > drivers/gpu/drm/i915/intel_hdmi.c | 8 ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > index 5ccb305a6e1c..d550653ad29f 100644 > --- a/drivers/gpu/drm/i915/intel_hdmi.c > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > @@ -962,8 +962,12 @@ static void intel_hdmi_compute_gcp_infoframe(struct intel_encoder *encoder, > crtc_state->infoframes.enable |= > intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL); > > - /* Indicate color depth whenever the sink supports deep color */ > - if (hdmi_sink_is_deep_color(conn_state)) > + /* Indicate color depth whenever the sink supports deep color > + * Also, 8bpc + color depth indication is no longer supported > + * for HSW+ platforms. > + * */ Comment formatting is off. It should be /* * blah */ > + if (hdmi_sink_is_deep_color(conn_state) && > + crtc_state->pipe_bpp > 24) I think this would fit on one line? With those adjusted this is Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > crtc_state->infoframes.gcp |= GCP_COLOR_INDICATION; > > /* Enable default_phase whenever the display mode is suitably aligned */ > -- > 2.17.1 -- Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
