On Wed, Apr 03, 2019 at 04:35:34PM -0700, José Roberto de Souza wrote:
> PSR support for VLV and CHV was dropped in commit ce3508fd2a77
> ("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep
> this registers around.
o.O
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 36 ---------------------------------
> 1 file changed, 36 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 00e03560c4e7..c59cfa83dbaf 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4209,42 +4209,6 @@ enum {
> #define PIPESRC(trans) _MMIO_TRANS2(trans, _PIPEASRC)
> #define PIPE_MULT(trans) _MMIO_TRANS2(trans, _PIPE_MULT_A)
>
> -/* VLV eDP PSR registers */
> -#define _PSRCTLA (VLV_DISPLAY_BASE + 0x60090)
> -#define _PSRCTLB (VLV_DISPLAY_BASE + 0x61090)
> -#define VLV_EDP_PSR_ENABLE (1 << 0)
> -#define VLV_EDP_PSR_RESET (1 << 1)
> -#define VLV_EDP_PSR_MODE_MASK (7 << 2)
> -#define VLV_EDP_PSR_MODE_HW_TIMER (1 << 3)
> -#define VLV_EDP_PSR_MODE_SW_TIMER (1 << 2)
> -#define VLV_EDP_PSR_SINGLE_FRAME_UPDATE (1 << 7)
> -#define VLV_EDP_PSR_ACTIVE_ENTRY (1 << 8)
> -#define VLV_EDP_PSR_SRC_TRANSMITTER_STATE (1 << 9)
> -#define VLV_EDP_PSR_DBL_FRAME (1 << 10)
> -#define VLV_EDP_PSR_FRAME_COUNT_MASK (0xff << 16)
> -#define VLV_EDP_PSR_IDLE_FRAME_SHIFT 16
> -#define VLV_PSRCTL(pipe) _MMIO_PIPE(pipe, _PSRCTLA, _PSRCTLB)
> -
> -#define _VSCSDPA (VLV_DISPLAY_BASE + 0x600a0)
> -#define _VSCSDPB (VLV_DISPLAY_BASE + 0x610a0)
> -#define VLV_EDP_PSR_SDP_FREQ_MASK (3 << 30)
> -#define VLV_EDP_PSR_SDP_FREQ_ONCE (1 << 31)
> -#define VLV_EDP_PSR_SDP_FREQ_EVFRAME (1 << 30)
> -#define VLV_VSCSDP(pipe) _MMIO_PIPE(pipe, _VSCSDPA, _VSCSDPB)
> -
> -#define _PSRSTATA (VLV_DISPLAY_BASE + 0x60094)
> -#define _PSRSTATB (VLV_DISPLAY_BASE + 0x61094)
> -#define VLV_EDP_PSR_LAST_STATE_MASK (7 << 3)
> -#define VLV_EDP_PSR_CURR_STATE_MASK 7
> -#define VLV_EDP_PSR_DISABLED (0 << 0)
> -#define VLV_EDP_PSR_INACTIVE (1 << 0)
> -#define VLV_EDP_PSR_IN_TRANS_TO_ACTIVE (2 << 0)
> -#define VLV_EDP_PSR_ACTIVE_NORFB_UP (3 << 0)
> -#define VLV_EDP_PSR_ACTIVE_SF_UPDATE (4 << 0)
> -#define VLV_EDP_PSR_EXIT (5 << 0)
> -#define VLV_EDP_PSR_IN_TRANS (1 << 7)
> -#define VLV_PSRSTAT(pipe) _MMIO_PIPE(pipe, _PSRSTATA, _PSRSTATB)
> -
> /* HSW+ eDP PSR registers */
> #define HSW_EDP_PSR_BASE 0x64800
> #define BDW_EDP_PSR_BASE 0x6f800
> --
> 2.21.0
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
