On Tue, Apr 02, 2019 at 10:17:25PM -0700, Aditya Swarup wrote:
> From: Clinton Taylor <Clinton.A.Taylor@xxxxxxxxx>
>
> v2: Fix commit msg to reflect why issue occurs(Jani)
> Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color.
>
> Changing settings from 10/12 bit deep color to 8 bit(& vice versa)
> doesn't work correctly using xrandr max bpc property. When we
> connect a monitor which supports deep color, the highest deep color
> setting is selected; which sets GCP_COLOR_INDICATION. When we change
> the setting to 8 bit color, we still set GCP_COLOR_INDICATION which
> doesn't allow the switch back to 8 bit color.
>
> v3: Add comments & explain changes in intel_hdmi_compute_config(Ville)
> Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc.
>
> Also, remove unnecessary calls to hdmi_deep_color_possible() from
> intel_hdmi_compute_config()
Nope. Please drop those hunsk.
>
> Ideally, hdmi_deep_color_possible() should be called only
> once to determine whether it is possible to set 10 or 12 bit
> deep color mode and adjust the desired bpp based on pipe_bpp
> instead of hard coding the values.
>
> Signed-off-by: Clinton Taylor <Clinton.A.Taylor@xxxxxxxxx>
> Signed-off-by: Aditya Swarup <aditya.swarup@xxxxxxxxx>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 36 ++++++++++++++++---------------
> 1 file changed, 19 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 5ccb305a6e1c..a93736fb1950 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -962,8 +962,13 @@ static void intel_hdmi_compute_gcp_infoframe(struct intel_encoder *encoder,
> crtc_state->infoframes.enable |=
> intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL);
>
> - /* Indicate color depth whenever the sink supports deep color */
> - if (hdmi_sink_is_deep_color(conn_state))
> + /* Indicate color depth whenever the sink supports deep color.
> + * Also, 8bpc + color depth indication is no longer supported
> + * for HSW+ platforms.
> + * */
> +
> + if (hdmi_sink_is_deep_color(conn_state) &&
> + crtc_state->pipe_bpp > 24)
> crtc_state->infoframes.gcp |= GCP_COLOR_INDICATION;
>
> /* Enable default_phase whenever the display mode is suitably aligned */
> @@ -2260,6 +2265,7 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
> int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
> int clock_10bpc = clock_8bpc * 5 / 4;
> int clock_12bpc = clock_8bpc * 3 / 2;
> + int dc_clock = clock_12bpc;
> int desired_bpp;
> bool force_dvi = intel_conn_state->force_audio == HDMI_AUDIO_OFF_DVI;
>
> @@ -2314,22 +2320,18 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
> * Note that g4x/vlv don't support 12bpc hdmi outputs. We also need
> * to check that the higher clock still fits within limits.
> */
> - if (hdmi_deep_color_possible(pipe_config, 12) &&
> - hdmi_port_clock_valid(intel_hdmi, clock_12bpc,
> + if (pipe_config->pipe_bpp == 30)
> + dc_clock = clock_10bpc;
> +
> + if (hdmi_deep_color_possible(pipe_config, pipe_config->pipe_bpp / 3) &&
> + hdmi_port_clock_valid(intel_hdmi, dc_clock,
> true, force_dvi) == MODE_OK) {
> - DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
> - desired_bpp = 12*3;
> -
> - /* Need to adjust the port link by 1.5x for 12bpc. */
> - pipe_config->port_clock = clock_12bpc;
> - } else if (hdmi_deep_color_possible(pipe_config, 10) &&
> - hdmi_port_clock_valid(intel_hdmi, clock_10bpc,
> - true, force_dvi) == MODE_OK) {
> - DRM_DEBUG_KMS("picking bpc to 10 for HDMI output\n");
> - desired_bpp = 10 * 3;
> -
> - /* Need to adjust the port link by 1.25x for 10bpc. */
> - pipe_config->port_clock = clock_10bpc;
> + DRM_DEBUG_KMS("picking bpc to %d for HDMI output\n",
> + pipe_config->pipe_bpp / 3);
> + desired_bpp = pipe_config->pipe_bpp;
> +
> + /* Need to adjust the port link dc modes. */
> + pipe_config->port_clock = dc_clock;
> } else {
> DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n");
> desired_bpp = 8*3;
> --
> 2.17.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
