On Fri, Mar 29, 2019 at 06:19:18PM +0530, Uma Shankar wrote:
> GC MAX register is used to program values from 1.0 to
> less than 3.0. A different register was used instead of
> the intended one. Fixed the same.
>
> Currently limiting it to 1.0 due to ABI limitations.
>
> Reported-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_color.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index ff910ed..dd179a8 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -518,14 +518,14 @@ static void bdw_load_gamma_lut(const struct intel_crtc_state *crtc_state, u32 of
> I915_WRITE(PREC_PAL_DATA(pipe), word);
> }
>
> - /* Program the max register to clamp values > 1.0. */
> - i = lut_size - 1;
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 0),
> - drm_color_lut_extract(lut[i].red, 16));
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 1),
> - drm_color_lut_extract(lut[i].green, 16));
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 2),
> - drm_color_lut_extract(lut[i].blue, 16));
> + /*
> + * Program the max register to clamp values > 1.0.
> + * ToDo: Extend the ABI to be able to program values
> + * from 1.0 to 3.0
> + */
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 0), (1 << 16) - 1);
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 1), (1 << 16) - 1);
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 2), (1 << 16) - 1);
Maybe we want these to be just 1<<16 to match how we set up the glk+
degamma?
> } else {
> for (i = 0; i < lut_size; i++) {
> u32 v = (i * ((1 << 10) - 1)) / (lut_size - 1);
> @@ -534,9 +534,9 @@ static void bdw_load_gamma_lut(const struct intel_crtc_state *crtc_state, u32 of
> (v << 20) | (v << 10) | v);
> }
>
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 0), (1 << 16) - 1);
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 1), (1 << 16) - 1);
> - I915_WRITE(PREC_PAL_GC_MAX(pipe, 2), (1 << 16) - 1);
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 0), (1 << 16) - 1);
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 1), (1 << 16) - 1);
> + I915_WRITE(PREC_PAL_EXT_GC_MAX(pipe, 2), (1 << 16) - 1);
> }
>
> /*
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
