By the time icl_ddi_clock_get() is called we've just got the hw state
from the pll registers. We don't need to read them again: we can rather
reuse what was cached in the dpll_hw_state.
While at it, s/refclk/ref_clock/ just to be consistent with the name
used in code nearby.
Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_ddi.c | 37 ++++++++++++++++----------------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 687ba9fe146e..9e4d58759910 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1374,25 +1374,21 @@ static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
}
static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
- enum port port)
+ const struct intel_dpll_hw_state *pll_state)
{
- enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
- u32 mg_pll_div0, mg_clktop_hsclkctl;
- u32 m1, m2_int, m2_frac, div1, div2, refclk;
+ u32 m1, m2_int, m2_frac, div1, div2, ref_clock;
u64 tmp;
- refclk = dev_priv->cdclk.hw.ref;
-
- mg_pll_div0 = I915_READ(MG_PLL_DIV0(tc_port));
- mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(tc_port));
+ ref_clock = dev_priv->cdclk.hw.ref;
- m1 = I915_READ(MG_PLL_DIV1(tc_port)) & MG_PLL_DIV1_FBPREDIV_MASK;
- m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
- m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
- (mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
- MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
+ m1 = pll_state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK;
+ m2_int = pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
+ m2_frac = (pll_state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
+ (pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
+ MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
- switch (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
+ switch (pll_state->mg_clktop2_hsclkctl &
+ MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2:
div1 = 2;
break;
@@ -1406,12 +1402,14 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
div1 = 7;
break;
default:
- MISSING_CASE(mg_clktop_hsclkctl);
+ MISSING_CASE(pll_state->mg_clktop2_hsclkctl);
return 0;
}
- div2 = (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
+ div2 = (pll_state->mg_clktop2_hsclkctl &
+ MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT;
+
/* div2 value of 0 is same as 1 means no div */
if (div2 == 0)
div2 = 1;
@@ -1420,8 +1418,8 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
* Adjust the original formula to delay the division by 2^22 in order to
* minimize possible rounding errors.
*/
- tmp = (u64)m1 * m2_int * refclk +
- (((u64)m1 * m2_frac * refclk) >> 22);
+ tmp = (u64)m1 * m2_int * ref_clock +
+ (((u64)m1 * m2_frac * ref_clock) >> 22);
tmp = div_u64(tmp, 5 * div1 * div2);
return tmp;
@@ -1467,10 +1465,11 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,
if (pll_id == DPLL_ID_ICL_TBTPLL)
link_clock = icl_calc_tbt_pll_link(dev_priv, port);
else
- link_clock = icl_calc_mg_pll_link(dev_priv, port);
+ link_clock = icl_calc_mg_pll_link(dev_priv, pll_state);
}
pipe_config->port_clock = link_clock;
+
ddi_dotclock_get(pipe_config);
}
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
