Re: [PATCH 2/2] drm/i915/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 22, 2019 at 10:58:01AM -0700, Manasi Navare wrote:
> On Fri, Mar 22, 2019 at 03:16:03PM +0200, Ville Syrjälä wrote:
> > On Fri, Mar 22, 2019 at 11:34:25AM +0200, Jani Nikula wrote:
> > > On Thu, 21 Mar 2019, Manasi Navare <manasi.d.navare@xxxxxxxxx> wrote:
> > > > In case of tiled displays where different tiles are displayed across
> > > > different ports, we need to synchronize the transcoders involved.
> > > > This patch implements the transcoder port sync feature for
> > > > synchronizing one master transcoder with one or more slave
> > > > transcoders. This is only enbaled in slave transcoder
> > > > and the master transcoder is unaware that it is operating
> > > > in this mode.
> > > > This has been tested with tiled display connected to ICL.
> > > >
> > > > Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > > > Cc: Matt Roper <matthew.d.roper@xxxxxxxxx>
> > > > Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> > > > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/i915/intel_display.c | 59 ++++++++++++++++++++++++++++
> > > >  1 file changed, 59 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > > index 9980a4ed8c9c..16b46a3cb3bd 100644
> > > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > > @@ -4009,6 +4009,62 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
> > > >  	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
> > > >  }
> > > >  
> > > > +static void icl_set_transcoder_port_sync(struct intel_atomic_state *old_intel_state,
> > > > +					 const struct intel_crtc_state *crtc_state)
> > > > +{
> > > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > > > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > > +	struct intel_crtc_state *genlock_crtc_state = NULL;
> > > > +	enum transcoder genlock_transcoder;
> > > > +	u32 trans_ddi_func_ctl2_val;
> > > > +	u8 master_select;
> > > > +
> > > > +	/*
> > > > +	 * Port Sync Mode cannot be enabled for DP MST
> > > > +	 */
> > > > +	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))
> > > > +		return;
> > > > +
> > > > +	/*
> > > > +	 * Configure the master select and enable Transcoder Port Sync for
> > > > +	 * Slave CRTCs transcoder.
> > > > +	 */
> > > > +	if (!crtc_state->genlock_crtc)
> > > > +		return;
> > > > +
> > > > +	genlock_crtc_state = intel_atomic_get_new_crtc_state(old_intel_state,
> > > > +							     crtc_state->genlock_crtc);
> > > > +	if (WARN_ON(!genlock_crtc_state))
> > > > +		return;
> > > > +
> > > > +	genlock_transcoder = genlock_crtc_state->cpu_transcoder;
> > > > +	switch (genlock_transcoder) {
> > > > +	case TRANSCODER_A:
> > > > +		master_select = 1;
> > > > +		break;
> > > > +	case TRANSCODER_B:
> > > > +		master_select = 2;
> > > > +		break;
> > > > +	case TRANSCODER_C:
> > > > +		master_select = 3;
> > > > +		break;
> > > > +	case TRANSCODER_EDP:
> > > > +	default:
> > > > +		master_select = 0;
> > > > +		break;
> > > > +	}
> > > > +	/* Set the master select bits for Tranascoder Port Sync */
> > > > +	trans_ddi_func_ctl2_val = I915_READ(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder));
> > > > +	trans_ddi_func_ctl2_val |= (PORT_SYNC_MODE_MASTER_SELECT(master_select) &
> > > > +				    PORT_SYNC_MODE_MASTER_SELECT_MASK) <<
> > > > +		PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
> > > 
> > > This doesn't do what you think it does. ITYM,
> > > 
> > > 	val = I915_READ();
> > >         val &= ~FOO_MASK;
> > >         val |= FOO_BAR;
> > 
> > Also we alreayd have a place where we write this registers. Is there
> > some magic requirement why these bits can't be set there along with
> > eveyrthing else?
> 
> We only write the bits of TRANS_DDI_FUNC_CTL currently but these bits
> are written to TRANS_DDI_FUNC_CTL2 and need to be written before enabling
> the transcoder.
> Thats why I created this separate function here to set the bits in TRANS_DDI_FUNC_CTL2

In that case there is no point in doing a rmw.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux