On Thu, Mar 21, 2019 at 03:02:57PM -0700, Lucas De Marchi wrote:
> By the time icl_ddi_clock_get() is called we've just got the hw state
> from the pll registers. We don't need to read them again: we can rather
> reuse what was cached in the dpll_hw_state.
>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 39 +++++++++++++++-----------------
> 1 file changed, 18 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index fe52af9fa4aa..0ea5a97dfe9d 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1372,26 +1372,20 @@ static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
> }
> }
>
> -static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
> - enum port port)
> +
> +static int icl_calc_mg_pll_link(struct intel_dpll_hw_state *state, u32 refclk)
Inconsistent with the cnl variant.
> {
> - enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
> - u32 mg_pll_div0, mg_clktop_hsclkctl;
> - u32 m1, m2_int, m2_frac, div1, div2, refclk;
> + u32 m1, m2_int, m2_frac, div1, div2;
> u64 tmp;
>
> - refclk = dev_priv->cdclk.hw.ref;
> -
> - mg_pll_div0 = I915_READ(MG_PLL_DIV0(tc_port));
> - mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(tc_port));
> -
> - m1 = I915_READ(MG_PLL_DIV1(tc_port)) & MG_PLL_DIV1_FBPREDIV_MASK;
> - m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
> - m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
> - (mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
> + m1 = state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK;
> + m2_int = state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
> + m2_frac = (state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
> + (state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
> MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
>
> - switch (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
> + switch (state->mg_clktop2_hsclkctl &
> + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
> case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2:
> div1 = 2;
> break;
> @@ -1405,12 +1399,14 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
> div1 = 7;
> break;
> default:
> - MISSING_CASE(mg_clktop_hsclkctl);
> + MISSING_CASE(state->mg_clktop2_hsclkctl);
> return 0;
> }
>
> - div2 = (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
> + div2 = (state->mg_clktop2_hsclkctl &
> + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
> MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT;
> +
> /* div2 value of 0 is same as 1 means no div */
> if (div2 == 0)
> div2 = 1;
> @@ -1457,9 +1453,6 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,
> struct intel_dpll_hw_state *state;
> enum port port = encoder->port;
> int link_clock = 0;
> - u32 pll_id;
> -
> - pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
>
> /* For DDI ports we always use a shared PLL. */
> if (WARN_ON(!pipe_config->shared_dpll))
> @@ -1470,10 +1463,14 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder,
> if (intel_port_is_combophy(dev_priv, port)) {
> link_clock = cnl_calc_wrpll_link(dev_priv, state);
> } else {
> + enum intel_dpll_id pll_id = intel_get_shared_dpll_id(dev_priv,
> + pipe_config->shared_dpll);
> +
> if (pll_id == DPLL_ID_ICL_TBTPLL)
> link_clock = icl_calc_tbt_pll_link(dev_priv, port);
> else
> - link_clock = icl_calc_mg_pll_link(dev_priv, port);
> + link_clock = icl_calc_mg_pll_link(
> + state, dev_priv->cdclk.hw.ref);
> }
>
> end:
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
