On Mon, Feb 25, 2019 at 9:35 PM Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx> wrote: > > Quoting Dave Airlie (2019-02-25 12:24:48) > > On Tue, 19 Feb 2019 at 23:32, Joonas Lahtinen > > <joonas.lahtinen@xxxxxxxxxxxxxxx> wrote: > > > > > > + dri-devel mailing list, especially for the buddy allocator part > > > > > > Quoting Dave Airlie (2019-02-15 02:47:07) > > > > On Fri, 15 Feb 2019 at 00:57, Matthew Auld <matthew.auld@xxxxxxxxx> wrote: > > > > > > > > > > In preparation for upcoming devices with device local memory, introduce the > > > > > concept of different memory regions, and a simple buddy allocator to manage > > > > > them. > > > > > > > > This is missing the information on why it's not TTM. > > > > > > > > Nothing against extending i915 gem off into doing stuff we already > > > > have examples off in tree, but before you do that it would be good to > > > > have a why we can't use TTM discussion in public. > > > > > > Glad that you asked. It's my fault that it was not included in > > > the cover letter. I anticipated the question, but was travelling > > > for a couple of days at the time this was sent. I didn't want > > > to write a hasty explanation and then disappear, leaving others to > > > take the heat. > > > > > > So here goes the less-hasty version: > > > > > > We did an analysis on the effort needed vs benefit gained of using > > > TTM when this was started initially. The conclusion was that we > > > already share the interesting bits of code through core DRM, really. > > > > > > Re-writing the memory handling to TTM would buy us more fine-grained > > > locking. But it's more a trait of rewriting the memory handling with > > > the information we have learned, than rewriting it to use TTM :) > > > > > > And further, we've been getting rid of struct_mutex at a steady phase > > > in the past years, so we have a clear path to the fine-grained locking > > > already in the not-so-distant future. With all this we did not see > > > much gained from converting over, as the code sharing is already > > > substantial. > > > > > > We also wanted to have the buddy allocator instead of a for loop making > > > drm_mm allocations to make sure we can keep the memory fragmentation > > > at bay. The intent is to move the buddy allocator to core DRM, to the > > > benefit of all the drivers, if there is interest from community. It has > > > been written as a strictly separate component with that in mind. > > > > > > And if you take the buddy allocator out of the patch set, the rest is > > > mostly just vfuncing things up to be able to have different backing > > > storages for objects. We took the opportunity to move over to the more > > > valgrind friendly mmap while touching things, but it's something we > > > have been contemplating anyway. And yeah, loads of selftests. > > > > > > That's really all that needed adding, and most of it is internal to > > > i915 and not to do with uAPI. This means porting over an userspace > > > driver doesn't require a substantial rewrite, but adding new a few > > > new IOCTLs to set the preferred backing storage placements. > > > > > > All the previous GEM abstractions keep applying, so we did not see > > > a justification to rewrite the kernel driver and userspace drivers. > > > It would have just to made things look like TTM, when we already > > > have the important parts of the code shared with TTM drivers > > > behind the GEM interfaces which all our drivers sit on top of. > > > > a) you guys should be the community as well, if the buddy allocator is > > useful in the core DRM get out there and try and see if anyone else > > has a use case for it, like the GPU scheduler we have now (can i915 > > use that yet? :-) > > Well, the buddy allocator should be useful for anybody wishing to have > as continuous physical allocations as possible. I have naively assumed > that would be almost everyone. So it would be only a question if others > see the amount of work required to convert over is justified for them. > > For the common DRM scheduler, I think a solid move from the beginning > would have been to factor out the i915 scheduler as it was most advanced > in features :) Now there is a way more trivial common scheduler core with > no easy path to transition without a feature regression. Can you elaborate? What features are missing from the drm gpu scheduler? > > We'd have to rewrite many of the more advanced features for that codebase > before we could transition over. It's hard to justify such work, for > that it would buy us very little compared to amount of work. > > Situation would be different if there was something gained from > switching over. This would be the situation if the more advanced > scheduler was picked as the shared codebase. > > > b) however this last two paragraphs fill me with no confidence that > > you've looked at TTM at all. It sounds like you took comments about > > TTM made 10 years ago, and didn't update them. There should be no > > major reason for a uapi change just because you adopt TTM. TTM hasn't > > ever had a common uapi across drivers upstream, one was proposed > > initially > 10 years ago. > > This is one part my confusion on what the question was for and other > part bad wording on my behalf. > > So an attempt to re-answer: When this effort was started it was obvious > that the amount of new code required was low (as you can see). Feedback > about what converting to TTM would require vs. give us was gathered from > folks including Daniel and Chris and the unanimous decision was that it > would not be justifiable. > > > All the current TTM using drivers except > > vmware use a GEM based API as well. TTM is an internal driver helper > > for managing pools of RAM. > > > > I'm just not sure what rebuilding a chunk of shared code inside the > > i915 driver is buying you, except a transition path into divergence > > from all the other discrete RAM drivers. > > I guess what I'm trying to say, there isn't that much code being added > that wouldn't be there anyway. The i915 GEM code has already grown to > what it is before this. > > Adding the suggested smaller amount of code vs. doing a much bigger > rewrite is something of a straightforward choice with the amount of > platforms and features in flight, especially when the end result is > the same. Because you will probably never do it. It's almost always easier to just incrementally add on to existing code. One could argue that GEM evolved into more or less the exact same thing as TTM anyway so why not bite the bullet and switch at some point? TTM works fine even for UMA hardware. > > > Like the gallium aversion in > > userspace, having a TTM aversion in kernel space is going to be the > > wrong path, and I'd rather not have to clean it up in 5 years when you > > guys eventually realise it. > > > > The i915 GEM code get rewritten and refactored quite often > > Well, we continually try to improve things and accommodate upcoming > product requirements and hardware feature. The thing is that we do it > upstream first, so hard to avoid the churn. > > When moving rapidly, it's hard to project what the shared portion of > the code might be or exactly look. I'm myself much more believer in > extracting the generic portions out when the code is there and working. > > The churn would be even bigger if there is a strict requirement to > refactor the common parts out straight from the beginning, before > anything is even proven in practice. > > That'd just mean it gets much harder to sell doing things upstream > first to the management. What does upstream first have to do with contributing to shared code? There is a common misconception in big companies that if you utilize shared infrastructure it will slow you down or you'll lose control of your code which is I think what you are referring to. Ultimately, it does sometimes raise the bar, but in the long term it benefits everyone and usually it doesn't really add that much overhead. It sounds like you are just feeding that misconception; you can't contribute to or take advantage of any shared infrastructure because that might slow you down. If that is the case, then why does upstream first even matter? It seems like the only common code you want to support is common code that you wrote in the first place. Alex > > When the code is in place and working, and we still agree that more > code reuse could be beneficial, it will be more viable thing to do > when there are less moving parts. > > > and has a > > bus factor of ickle, if he decided to go elsewhere, you will have a > > pile of code that nobody gets, I think having a TTM backend would have > > a better long term effect on your driver maintainability. > > Well, as you might notice, the patches are not from ickle. > > I'm not saying we couldn't improve code sharing. I currently have a > priority in making sure we can enable the upcoming platforms, which has > a much more direct effect on our short and long term driver > maintainability through resourcing :) > > If the platform support is not there, it's hard to have the headcount > to work on refactoring the reusable parts of code out. > > So I'm hoping we can have an incremental approach to the code > refactorings suggested, that doesn't stall the delivery of the features. > > Regards, Joonas > > > Dave. > _______________________________________________ > dri-devel mailing list > dri-devel@xxxxxxxxxxxxxxxxxxxxx > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
