Fixed the glk degamma lut programming which currently
was hard coding a linear lut all the time, making degamma
block of glk basically a pass through.
Currently degamma lut for glk is assigned as 0 in platform
configuration. Updated the same to 33 as per the hardware
capability. IGT tests for degamma were getting skipped due to
this, spotted by Swati.
ToDo: The current gamma/degamm lut ABI has just 16bit for each
color component. This is not enough for GLK+, since input
precision is increased to 3.16 which will need 19bit entries.
v2: Added Matt's RB.
v3: Changed uint32_t to u32.
Credits-to: Swati Sharma <swati2.sharma@xxxxxxxxx>
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_pci.c | 2 +-
drivers/gpu/drm/i915/intel_color.c | 34 ++++++++++++++++++++++++++--------
2 files changed, 27 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 66f82f3..2a4d25c 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -75,7 +75,7 @@
.gamma_lut_tests = DRM_COLOR_LUT_NON_DECREASING, \
}
#define GLK_COLORS \
- .color = { .degamma_lut_size = 0, .gamma_lut_size = 1024, \
+ .color = { .degamma_lut_size = 33, .gamma_lut_size = 1024, \
.degamma_lut_tests = DRM_COLOR_LUT_NON_DECREASING | \
DRM_COLOR_LUT_EQUAL_CHANNELS, \
}
diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
index c0e2806..4e13286 100644
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -518,7 +518,7 @@ static void glk_load_degamma_lut(const struct intel_crtc_state *crtc_state)
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
enum pipe pipe = crtc->pipe;
- const u32 lut_size = 33;
+ const u32 lut_size = INTEL_INFO(dev_priv)->color.degamma_lut_size;
u32 i;
/*
@@ -529,14 +529,32 @@ static void glk_load_degamma_lut(const struct intel_crtc_state *crtc_state)
I915_WRITE(PRE_CSC_GAMC_INDEX(pipe), 0);
I915_WRITE(PRE_CSC_GAMC_INDEX(pipe), PRE_CSC_GAMC_AUTO_INCREMENT);
- /*
- * FIXME: The pipe degamma table in geminilake doesn't support
- * different values per channel, so this just loads a linear table.
- */
- for (i = 0; i < lut_size; i++) {
- u32 v = (i * (1 << 16)) / (lut_size - 1);
+ if (crtc_state->base.degamma_lut) {
+ struct drm_color_lut *lut = crtc_state->base.degamma_lut->data;
+
+ for (i = 0; i < lut_size; i++) {
+ /*
+ * First 33 entries represent range from 0 to 1.0
+ * 34th and 35th entry will represent extended range
+ * inputs 3.0 and 7.0 respectively, currently clamped
+ * at 1.0. Since the precision is 16bit, the user
+ * value can be directly filled to register.
+ * The pipe degamma table in GLK+ onwards doesn't
+ * support different values per channel, so this just
+ * programs green value which will be equal to Red and
+ * Blue into the lut registers.
+ * ToDo: Extend to max 7.0. Enable 32 bit input value
+ * as compared to just 16 to achieve this.
+ */
+ I915_WRITE(PRE_CSC_GAMC_DATA(pipe), lut[i].green);
+ }
+ } else {
+ /* load a linear table. */
+ for (i = 0; i < lut_size; i++) {
+ u32 v = (i * (1 << 16)) / (lut_size - 1);
- I915_WRITE(PRE_CSC_GAMC_DATA(pipe), v);
+ I915_WRITE(PRE_CSC_GAMC_DATA(pipe), v);
+ }
}
/* Clamp values > 1.0. */
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
