On Mon, Feb 04, 2019 at 03:40:22PM -0800, Manasi Navare wrote:
> This patch adds appropiate kernel documentation for DRM DP helpers
> used for enabling Display Stream compression functionality in
> drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec
> related structure definitions and helpers in drm_dsc.c and drm_dsc.h
> Also add links between the functions and structures in the documentation.
>
> Suggested-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Suggested-by: Sean Paul <sean@xxxxxxxxxx>
> Cc: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> Cc: Sean Paul <sean@xxxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Awesome, more docs!
> ---
> drivers/gpu/drm/drm_dp_helper.c | 42 +++++++++-
> drivers/gpu/drm/drm_dsc.c | 13 ++-
> include/drm/drm_dp_helper.h | 15 +++-
> include/drm/drm_dsc.h | 138 ++++++++++++++++++--------------
> 4 files changed, 142 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 54120b6319e7..e9e0233f5b2f 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -1360,7 +1360,20 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
> EXPORT_SYMBOL(drm_dp_read_desc);
>
> /**
> - * DRM DP Helpers for DSC
> + * drm_dp_dsc_sink_max_slice_count() - Get the max slice count
> + * supported by the DSC sink.
> + * @dsc_dpcd: DSC capabilities from DPCD
> + * @is_edp: true if its eDP, false for DP
> + *
> + * Read the slice capabilities DPCD register from DSC sink to get
> + * the maximum slice count supported. This is used to populate
> + * the DSC parameters in the &struct drm_dsc_config by the driver.
> + * Driver creates an infoframe using these parameters to populate
> + * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
> + * infoframe using the helper function drm_dsc_pps_infoframe_pack()
> + *
> + * Returns:
> + * Maximum slice count supported by DSC sink or 0 its invalid
> */
> u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
> bool is_edp)
> @@ -1405,6 +1418,19 @@ u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
> }
> EXPORT_SYMBOL(drm_dp_dsc_sink_max_slice_count);
>
> +/**
> + * drm_dp_dsc_sink_line_buf_depth() - Get the line buffer depth in bits which is
> + * number of bits of precision within the decoder line buffer supported by
> + * the DSC sink. This is used to populate the DSC parameters in the
> + * &struct drm_dsc_config by the driver.
> + * Driver creates an infoframe using these parameters to populate
> + * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
> + * infoframe using the helper function drm_dsc_pps_infoframe_pack()
The entire above block ends up being used as the "one-line" summary, and
no description. I guess you wanted to split it up like the one above?
The description starts after the first empty newline, everything before
that is the summary.
> + * @dsc_dpcd: DSC capabilities from DPCD
> + *
> + * Returns:
> + * Line buffer depth supported by DSC panel or 0 its invalid
> + */
> u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
> {
> u8 line_buf_depth = dsc_dpcd[DP_DSC_LINE_BUF_BIT_DEPTH - DP_DSC_SUPPORT];
> @@ -1434,6 +1460,20 @@ u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE])
> }
> EXPORT_SYMBOL(drm_dp_dsc_sink_line_buf_depth);
>
> +/**
> + * drm_dp_dsc_sink_supported_input_bpcs() - Get all the input bits per component
> + * values supported by the DSC sink. This is used to populate the DSC parameters
> + * in the &struct drm_dsc_config by the driver.
> + * Driver creates an infoframe using these parameters to populate
> + * &struct drm_dsc_pps_infoframe. These are sent to the sink using DSC
> + * infoframe using the helper function drm_dsc_pps_infoframe_pack()
> + * @dsc_dpcd: DSC capabilities from DPCD
> + * @dsc_bpc: An array to be filled by this helper with supported
> + * input bpcs.
> + *
> + * Returns:
> + * Number of input BPC values parsed from the DPCD
> + */
> int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE],
> u8 dsc_bpc[3])
> {
> diff --git a/drivers/gpu/drm/drm_dsc.c b/drivers/gpu/drm/drm_dsc.c
> index bc2b23adb072..0fd56fbdf9b4 100644
> --- a/drivers/gpu/drm/drm_dsc.c
> +++ b/drivers/gpu/drm/drm_dsc.c
> @@ -17,6 +17,12 @@
> /**
> * DOC: dsc helpers
> *
> + * VESA specification for DP 1.4 adds a new feature called Display Stream
> + * Compression (DSC) used to compress the pixel bits before sending it on
> + * DP/eDP/MIPI DSI interface. DSC is required to be enabled so that the existing
> + * display interfaces can support high resolutions at higher frames rates uisng
> + * the maximum available link capacity of these interfaces.
> + *
> * These functions contain some common logic and helpers to deal with VESA
> * Display Stream Compression standard required for DSC on Display Port/eDP or
> * MIPI display interfaces.
> @@ -26,6 +32,7 @@
> * drm_dsc_dp_pps_header_init() - Initializes the PPS Header
> * for DisplayPort as per the DP 1.4 spec.
> * @pps_sdp: Secondary data packet for DSC Picture Parameter Set
> + * as defined in &struct drm_dsc_pps_infoframe
> */
> void drm_dsc_dp_pps_header_init(struct drm_dsc_pps_infoframe *pps_sdp)
> {
> @@ -44,9 +51,11 @@ EXPORT_SYMBOL(drm_dsc_dp_pps_header_init);
> * that span more than 1 byte.
> *
> * @pps_sdp:
> - * Secondary data packet for DSC Picture Parameter Set
> + * Secondary data packet for DSC Picture Parameter Set. This is defined
> + * by &struct drm_dsc_pps_infoframe
> * @dsc_cfg:
> - * DSC Configuration data filled by driver
> + * DSC Configuration data filled by driver as defined by
> + * &struct drm_dsc_config
> */
> void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp,
> const struct drm_dsc_config *dsc_cfg)
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 5db7fb8c8b50..2711cdfa0c13 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1052,11 +1052,18 @@ int drm_dp_bw_code_to_link_rate(u8 link_bw);
> #define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */
> /* 0x80+ CEA-861 infoframe types */
>
> +/**
> + * struct dp_sdp_header - DP secondary data packet header
> + * @HB0: Secondary Data Packet ID
> + * @HB1: Secondary Data Packet Type
> + * @HB2: Secondary Data Packet Specific header, Byte 0
> + * @HB3: Secondary Data packet Specific header, Byte 1
> + */
> struct dp_sdp_header {
> - u8 HB0; /* Secondary Data Packet ID */
> - u8 HB1; /* Secondary Data Packet Type */
> - u8 HB2; /* Secondary Data Packet Specific header, Byte 0 */
> - u8 HB3; /* Secondary Data packet Specific header, Byte 1 */
> + u8 HB0;
> + u8 HB1;
> + u8 HB2;
> + u8 HB3;
> } __packed;
>
> #define EDP_SDP_HEADER_REVISION_MASK 0x1F
> diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h
> index d03f1b83421a..f50d265a97e2 100644
> --- a/include/drm/drm_dsc.h
> +++ b/include/drm/drm_dsc.h
> @@ -44,111 +44,128 @@
> #define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0
> #define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13
>
> -/* Configuration for a single Rate Control model range */
> +/**
> + * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters
> + *
> + * @range_min_qp: Min Quantization Parameters allowed for this range
> + * @range_max_qp: Max Quantization Parameters allowed for this range
> + * @range_bpg_offset: Bits/group offset to apply to target for this group
> + */
> struct drm_dsc_rc_range_parameters {
> - /* Min Quantization Parameters allowed for this range */
> u8 range_min_qp;
> - /* Max Quantization Parameters allowed for this range */
> u8 range_max_qp;
> - /* Bits/group offset to apply to target for this group */
> u8 range_bpg_offset;
Since you already have inline comments I'd stick to inline kerneldoc.
Those can also be just one line, e.g.
/** foo: one-line description of what foo is */
u8 foo;
> };
>
> +/**
> + * struct drm_dsc_config - Parameters required to configure DSC
> + *
> + * @line_buf_depth: Bits / component for previous reconstructed line buffer
> + * @bits_per_component: Bits per component to code (8/10/12)
> + * @convert_rgb: Flag to indicate if RGB - YCoCg conversion is needed
> + * True if RGB input, False if YCoCg input
> + * @slice_count: Number fo slices per line used by the DSC encoder
> + * @slice_width: Width of each slice in pixels
> + * @slice_height: Slice height in pixels
> + * @enable422: True for 4_2_2 sampling, false for 4_4_4 sampling
> + * @pic_width: Width of the input display frame in pixels
> + * @pic_height: Vertical height of the input display frame
> + * @rc_tgt_offset_high: Offset to bits/group used by RC to determine QP
> + * adjustment
> + * @rc_tgt_offset_low: Offset to bits/group used by RC to determine QP
> + * adjustment
> + * @bits_per_pixel: Target bits per pixel with 4 fractional bits.
> + * bits_per_pixel << 4
> + * @rc_edge_factor: Factor to determine if an edge is present based on the
> + * bits produced
> + * @rc_quant_incr_limit1: Slow down incrementing once the range reaches this
> + * value
> + * @rc_quant_incr_limit0: Slow down incrementing once the range reaches this
> + * value
> + * @initial_xmit_delay: Number of pixels to delay the initial transmission
> + * @initial_dec_delay: Initial decoder delay, number of pixel times that the
> + * decoer accumulates data in its rate buffer before
> + * starting to decode and output pixels.
> + * @block_pred_enable: True if block prediction is used to code any groups
> + * within the picture.
> + * False if BP not used
> + * @first_line_bpg_offset: Number of additional bits allocated for each group on
> + * the first line of slice.
> + * @initial_offset: Value to use for RC model offset at slice start
> + * @rc_buf_thresh: Thresholds defining each of the buffer ranges
> + * @rc_range_params: Parameters for each of the RC ranges defined in
> + * &struct drm_dsc_rc_range_parameters
> + * @rc_model_size: Total size of RC model
> + * @flatness_min_qp: Minimum QP where flatness information is sent
> + * @flatness_max_qp: Maximum QP where flatness information is sent
> + * @initial_scale_value: Initial value for the scale factor
> + * @scale_decrement_interval: Specifies number of group times between
> + * decrementing the scale factor at beginning
> + * of a slice.
> + * @scale_increment_interval: Number of group times between incrementing
> + * the scale factor value used at the beginning
> + * of a slice.
> + * @nfl_bpg_offset: Non first line BPG offset to be used
> + * @slice_bpg_offset: BPG offset used to enforce slice bit
> + * @final_offset: Final RC linear transformation offset value
> + * @vbr_enable: True if VBR mode is enabled, false if disabled
> + * @mux_word_size: Mux word size (in bits) for SSM mode
> + * @slice_chunk_size: The (max) size in bytes of the "chunks" that are
> + * used in slice multiplexing.
> + * @rc_bits: Rate control buffer size in bits
> + * @dsc_version_minor: DSC minor version
> + * @dsc_version_major: DSC major version
> + * @native_422: True if Native 4:2:2 supported, else false
> + * @native_420: True if Native 4:2:0 supported else false.
> + * @second_line_bpg_offset: Additional bits/grp for seconnd line of slice for
> + * native 4:2:0
> + * @nsl_bpg_offset: Num of bits deallocated for each grp that is not in second
> + * line of slice
> + * @second_line_offset_adj: Offset adjustment for second line in Native 4:2:0
> + * mode
Yeah I think this is a clear example of where struct comments all in the
top is much worse than inline comments. Please go with the inline style
here.
Cheers, Daniel
> + */
> struct drm_dsc_config {
> - /* Bits / component for previous reconstructed line buffer */
> u8 line_buf_depth;
> - /* Bits per component to code (must be 8, 10, or 12) */
> u8 bits_per_component;
> - /*
> - * Flag indicating to do RGB - YCoCg conversion
> - * and back (should be 1 for RGB input)
> - */
> bool convert_rgb;
> u8 slice_count;
> - /* Slice Width */
> u16 slice_width;
> - /* Slice Height */
> u16 slice_height;
> - /*
> - * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens
> - * outside of DSC encode/decode algorithm)
> - */
> bool enable422;
> - /* Picture Width */
> u16 pic_width;
> - /* Picture Height */
> u16 pic_height;
> - /* Offset to bits/group used by RC to determine QP adjustment */
> u8 rc_tgt_offset_high;
> - /* Offset to bits/group used by RC to determine QP adjustment */
> u8 rc_tgt_offset_low;
> - /* Bits/pixel target << 4 (ie., 4 fractional bits) */
> u16 bits_per_pixel;
> - /*
> - * Factor to determine if an edge is present based
> - * on the bits produced
> - */
> u8 rc_edge_factor;
> - /* Slow down incrementing once the range reaches this value */
> u8 rc_quant_incr_limit1;
> - /* Slow down incrementing once the range reaches this value */
> u8 rc_quant_incr_limit0;
> - /* Number of pixels to delay the initial transmission */
> u16 initial_xmit_delay;
> - /* Number of pixels to delay the VLD on the decoder,not including SSM */
> u16 initial_dec_delay;
> - /* Block prediction enable */
> bool block_pred_enable;
> - /* Bits/group offset to use for first line of the slice */
> u8 first_line_bpg_offset;
> - /* Value to use for RC model offset at slice start */
> u16 initial_offset;
> - /* Thresholds defining each of the buffer ranges */
> u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
> - /* Parameters for each of the RC ranges */
> struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES];
> - /* Total size of RC model */
> u16 rc_model_size;
> - /* Minimum QP where flatness information is sent */
> u8 flatness_min_qp;
> - /* Maximum QP where flatness information is sent */
> u8 flatness_max_qp;
> - /* Initial value for scale factor */
> u8 initial_scale_value;
> - /* Decrement scale factor every scale_decrement_interval groups */
> u16 scale_decrement_interval;
> - /* Increment scale factor every scale_increment_interval groups */
> u16 scale_increment_interval;
> - /* Non-first line BPG offset to use */
> u16 nfl_bpg_offset;
> - /* BPG offset used to enforce slice bit */
> u16 slice_bpg_offset;
> - /* Final RC linear transformation offset value */
> u16 final_offset;
> - /* Enable on-off VBR (ie., disable stuffing bits) */
> bool vbr_enable;
> - /* Mux word size (in bits) for SSM mode */
> u8 mux_word_size;
> - /*
> - * The (max) size in bytes of the "chunks" that are
> - * used in slice multiplexing
> - */
> u16 slice_chunk_size;
> - /* Rate Control buffer siz in bits */
> u16 rc_bits;
> - /* DSC Minor Version */
> u8 dsc_version_minor;
> - /* DSC Major version */
> u8 dsc_version_major;
> - /* Native 4:2:2 support */
> bool native_422;
> - /* Native 4:2:0 support */
> bool native_420;
> - /* Additional bits/grp for seconnd line of slice for native 4:2:0 */
> u8 second_line_bpg_offset;
> - /* Num of bits deallocated for each grp that is not in second line of slice */
> u16 nsl_bpg_offset;
> - /* Offset adj fr second line in Native 4:2:0 mode */
> u16 second_line_offset_adj;
> };
>
> @@ -468,10 +485,13 @@ struct drm_dsc_picture_parameter_set {
> * This structure represents the DSC PPS infoframe required to send the Picture
> * Parameter Set metadata required before enabling VESA Display Stream
> * Compression. This is based on the DP Secondary Data Packet structure and
> - * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload.
> + * comprises of SDP Header as defined &struct struct dp_sdp_header in drm_dp_helper.h
> + * and PPS payload defined in &struct drm_dsc_picture_parameter_set.
> *
> - * @pps_header: Header for PPS as per DP SDP header format
> + * @pps_header: Header for PPS as per DP SDP header format of type
> + * &struct dp_sdp_header
> * @pps_payload: PPS payload fields as per DSC specification Table 4-1
> + * as represented in &struct drm_dsc_picture_parameter_set
> */
> struct drm_dsc_pps_infoframe {
> struct dp_sdp_header pps_header;
> --
> 2.19.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
