>-----Original Message-----
>From: C, Ramalingam
>Sent: Thursday, January 31, 2019 12:30 PM
>To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
>daniel.vetter@xxxxxxxx; Winkler, Tomas <tomas.winkler@xxxxxxxxx>; Shankar,
>Uma <uma.shankar@xxxxxxxxx>
>Cc: C, Ramalingam <ramalingam.c@xxxxxxxxx>
>Subject: [PATCH v10 34/40] misc/mei/hdcp: Enabling the HDCP authentication
>
>Request to ME to configure a port as authenticated.
>
>On Success, ME FW will mark the port as authenticated and provides HDCP cipher
>with the encryption keys.
>
>Enabling the Authentication can be requested once all stages of
>HDCP2.2 authentication is completed by interacting with ME FW.
>
>Only after this stage, driver can enable the HDCP encryption for the port, through
>HW registers.
>
>v2: Rebased.
>v3:
> cldev is passed as first parameter [Tomas]
> Redundant comments and cast are removed [Tomas]
>v4:
> %zd for ssize_t [Alexander]
> %s/return -1/return -EIO [Alexander]
> Style and typos fixed [Uma]
>v5: Rebased.
>v6:
> Collected the Rb-ed by.
> Rebased.
>v7:
> Adjust to the new mei interface.
> Fix for Kdoc.
>v8:
> K-Doc addition. [Tomas]
>
>Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
>Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
Latest set looks ok. You can keep the RB.
>---
> drivers/misc/mei/hdcp/mei_hdcp.c | 54
>+++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 53 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
>b/drivers/misc/mei/hdcp/mei_hdcp.c
>index 91f7b08d1df1..5303c729612b 100644
>--- a/drivers/misc/mei/hdcp/mei_hdcp.c
>+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
>@@ -587,6 +587,58 @@ static int mei_verify_mprime(struct device *dev, struct
>hdcp_port_data *data,
> return 0;
> }
>
>+/**
>+ * mei_enable_hdcp_authentication() - Mark a port as authenticated
>+through ME FW
>+ * @dev: device corresponding to the mei_cl_device
>+ * @hdcp_data: Intel HW specific hdcp data
>+ *
>+ * Return: 0 on Success, <0 on Failure
>+ */
>+static int
>+mei_enable_hdcp_authentication(struct device *dev, struct
>+hdcp_port_data *data) {
>+ struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } };
>+ struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } };
>+ struct mei_cl_device *cldev;
>+ ssize_t byte;
>+
>+ if (!dev || !data)
>+ return -EINVAL;
>+
>+ cldev = to_mei_cl_device(dev);
>+
>+ enable_auth_in.header.api_version = HDCP_API_VERSION;
>+ enable_auth_in.header.command_id = WIRED_ENABLE_AUTH;
>+ enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS;
>+ enable_auth_in.header.buffer_len =
>WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN;
>+
>+ enable_auth_in.port.integrated_port_type = data->port_type;
>+ enable_auth_in.port.physical_port = (u8)GET_MEI_DDI_INDEX(data-
>>port);
>+ enable_auth_in.stream_type = data->streams[0].stream_type;
>+
>+ byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
>+ sizeof(enable_auth_in));
>+ if (byte < 0) {
>+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
>+ return byte;
>+ }
>+
>+ byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out,
>+ sizeof(enable_auth_out));
>+ if (byte < 0) {
>+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
>+ return byte;
>+ }
>+
>+ if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) {
>+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
>+ WIRED_ENABLE_AUTH,
>enable_auth_out.header.status);
>+ return -EIO;
>+ }
>+
>+ return 0;
>+}
>+
> static __attribute__((unused))
> struct i915_hdcp_component_ops mei_hdcp_ops = {
> .owner = THIS_MODULE,
>@@ -599,7 +651,7 @@ struct i915_hdcp_component_ops mei_hdcp_ops = {
> .get_session_key = mei_get_session_key,
> .repeater_check_flow_prepare_ack =
>mei_repeater_check_flow_prepare_ack,
> .verify_mprime = mei_verify_mprime,
>- .enable_hdcp_authentication = NULL,
>+ .enable_hdcp_authentication = mei_enable_hdcp_authentication,
> .close_hdcp_session = NULL,
> };
>
>--
>2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
