On gen4+ we have a bitfield to specify from which pipe the backlight controller should take it's clock. For PCH split platforms we've already set these up, but only at initialization time. And without taking into account the 3rd pipe added with ivb. For gen4, we've completely ignored these. Although we do restrict lvds to the 2nd pipe, so this is only a problem on machines where we boot up with the lvds on the first pipe. So restructure the code to enable the backlight on the right pipe at modeset time. v2: For odd reasons panel_enable_backlight gets called twice in a modeset, so we can't WARN_ON in there if the backlight controller is switched on already. Tested-By: Kamal Mostafa <kamal at canonical.com> Bugzilla: https://bugs.launchpad.net/bugs/954661 Cc: Carsten Emde <C.Emde at osadl.org> Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch> --- drivers/gpu/drm/i915/intel_drv.h | 3 +- drivers/gpu/drm/i915/intel_lvds.c | 32 +++++------------------------ drivers/gpu/drm/i915/intel_panel.c | 38 +++++++++++++++++++++++++++++++++++- 3 files changed, 45 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 39d7b07..2fc2623 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -377,7 +377,8 @@ extern u32 intel_panel_get_max_backlight(struct drm_device *dev); extern u32 intel_panel_get_backlight(struct drm_device *dev); extern void intel_panel_set_backlight(struct drm_device *dev, u32 level); extern int intel_panel_setup_backlight(struct drm_device *dev); -extern void intel_panel_enable_backlight(struct drm_device *dev); +extern void intel_panel_enable_backlight(struct drm_device *dev, + enum pipe pipe); extern void intel_panel_disable_backlight(struct drm_device *dev); extern void intel_panel_destroy_backlight(struct drm_device *dev); extern enum drm_connector_status intel_panel_detect(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index a7269e6..492db77 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -71,6 +71,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; + struct intel_crtc *intel_crtc = to_intel_crtc(intel_lvds->base.base.crtc); struct drm_i915_private *dev_priv = dev->dev_private; u32 ctl_reg, lvds_reg, stat_reg; @@ -107,7 +108,7 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds) if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000)) DRM_ERROR("timed out waiting for panel to power on\n"); - intel_panel_enable_backlight(dev); + intel_panel_enable_backlight(dev, intel_crtc->pipe); } static void intel_lvds_disable(struct intel_lvds *intel_lvds) @@ -1074,35 +1075,14 @@ bool intel_lvds_init(struct drm_device *dev) goto failed; out: + /* + * Unlock registers and just + * leave them unlocked + */ if (HAS_PCH_SPLIT(dev)) { - u32 pwm; - - pipe = (I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT) ? 1 : 0; - - /* make sure PWM is enabled and locked to the LVDS pipe */ - pwm = I915_READ(BLC_PWM_CPU_CTL2); - if (pipe == 0 && (pwm & BLM_PIPE_B)) - I915_WRITE(BLC_PWM_CPU_CTL2, pwm & ~BLM_PWM_ENABLE); - if (pipe) - pwm |= BLM_PIPE_B; - else - pwm &= ~BLM_PIPE_B; - I915_WRITE(BLC_PWM_CPU_CTL2, pwm | BLM_PWM_ENABLE); - - pwm = I915_READ(BLC_PWM_PCH_CTL1); - pwm |= BLM_PCH_PWM_ENABLE; - I915_WRITE(BLC_PWM_PCH_CTL1, pwm); - /* - * Unlock registers and just - * leave them unlocked - */ I915_WRITE(PCH_PP_CONTROL, I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS); } else { - /* - * Unlock registers and just - * leave them unlocked - */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); } diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 2a1625d..5e52639 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -287,9 +287,18 @@ void intel_panel_disable_backlight(struct drm_device *dev) dev_priv->backlight_enabled = false; intel_panel_actually_set_backlight(dev, 0); + + if (INTEL_INFO(dev)->gen >= 4) { + uint32_t reg; + + reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; + + I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE); + } } -void intel_panel_enable_backlight(struct drm_device *dev) +void intel_panel_enable_backlight(struct drm_device *dev, + enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -298,6 +307,33 @@ void intel_panel_enable_backlight(struct drm_device *dev) dev_priv->backlight_enabled = true; intel_panel_actually_set_backlight(dev, dev_priv->backlight_level); + + if (INTEL_INFO(dev)->gen >= 4) { + uint32_t reg, tmp; + + reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; + + + tmp = I915_READ(reg); + + /* While modesetting this code gets called twice, hence don't + * adjust the backlight pipe if the backlight pwm is enabled + * again already. */ + if (tmp & BLM_PWM_ENABLE) + return; + + if (dev_priv->num_pipe == 3) + tmp &= ~BLM_PIPE_SELECT_IVB; + else + tmp &= ~BLM_PIPE_SELECT; + + tmp |= BLM_PIPE(pipe); + tmp &= ~BLM_PWM_ENABLE; + + I915_WRITE(reg, tmp); + POSTING_READ(reg); + I915_WRITE(reg, tmp | BLM_PWM_ENABLE); + } } static void intel_panel_init_backlight(struct drm_device *dev) -- 1.7.7.6
